Edelbrock Carb Linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cam-Shaft · 03-11-2015, 11:56 PM

Hi all,

My 69 came with a new edelbrock, but there is no linkage. All I have is the pivot arm that goes through the firewall and the carb itself, no springs or linkage. Can anyone point me to what I need?

Thanks

**67sss** · 03-12-2015, 12:14 AM

There are several different ways to get this done. It all depends on what YOU want. In the toolbar that says search, type in throttle linkage, and you can look at home made ones, stock ones and aftermarket ones. Hope this helps! Good luck!

**leddzepp** · 03-12-2015, 12:43 AM

Cable to an Edelbrock

**leddzepp** · 03-12-2015, 12:44 AM

Rod to a q-jet.

**desertnick69** · 03-12-2015, 01:06 AM

Quote:

Originally Posted by leddzepp

Rod to a q-jet.

This is what my 69 has. What trans do you have?

Cam-Shaft · 03-12-2015, 08:29 AM

Wow, Thanks everyone. I have a sm465 4 speed. I like the cable one, is there a kit to convert my linkage style to that? or will I have to build some custom rig?

**leddzepp** · 03-12-2015, 10:29 AM

Quote:

Originally Posted by desertnick69

This is what my 69 has. What trans do you have?

TH350

Quote:

Originally Posted by Cam-Shaft

Wow, Thanks everyone. I have a sm465 4 speed. I like the cable one, is there a kit to convert my linkage style to that? or will I have to build some custom rig?

The cable style is 71/72, but a lot of people swap this into the earlier trucks. I believe Lokar makes an aftermarket kit, or you can look on the parts board for someone selling an OEM setup.

03-11-2015, 11:56 PM	#1
Cam-Shaft Registered User Join Date: Nov 2014 Location: Vernon, CT Posts: 85	Edelbrock Carb Linkage Hi all, My 69 came with a new edelbrock, but there is no linkage. All I have is the pivot arm that goes through the firewall and the carb itself, no springs or linkage. Can anyone point me to what I need? Thanks

03-12-2015, 12:14 AM	#2
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	Re: Edelbrock Carb Linkage There are several different ways to get this done. It all depends on what YOU want. In the toolbar that says search, type in throttle linkage, and you can look at home made ones, stock ones and aftermarket ones. Hope this helps! Good luck!

03-12-2015, 12:43 AM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: Edelbrock Carb Linkage Cable to an Edelbrock Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

03-12-2015, 12:44 AM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: Edelbrock Carb Linkage Rod to a q-jet. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

03-12-2015, 08:29 AM	#6
Cam-Shaft Registered User Join Date: Nov 2014 Location: Vernon, CT Posts: 85	Re: Edelbrock Carb Linkage Wow, Thanks everyone. I have a sm465 4 speed. I like the cable one, is there a kit to convert my linkage style to that? or will I have to build some custom rig?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.