manual roll-up/down windows to power?

[bL.A.zer90045]

Hey there fellas,had some questions pertaining to the swapping out of my manual roll_up/down windows on my 86 k5 for some power windows from a 88 donor? What would I need as far as electrical? From the 88 to make work? Can this be done? Any info/know_how,as usual much appreciated!!!
Posted via Mobile Device

[blazerkid]

you want the complete wiring harness like every thing.



hope that helps
Alex

[bL.A.zer90045]

Thanks for the response!!! So this is DOable then?
Posted via Mobile Device

[closer9]

Yep, very doable. I've got all the parts to do it in my '79, just haven't had the time.

The power window harness should also contain power locks. So, if you find donor doors, pull the lock actuators and linkage as well. Unless you don't want them.

[bL.A.zer90045]

COOL!!!! Music to my ears!!! Thanks guys for the feedback,MUCH appreciated!
Posted via Mobile Device

[motornut]

if the truck has power locks and manual wimdows
the wires in the harness plugs are in different spots then with both
and get the rubber boots for the doors/wires

[bL.A.zer90045]

Thank you for the heads up and great reference pic!!!!
Posted via Mobile Device

[motornut]

Originally Posted by bL.A.zer90045

Thank you for the heads up and great reference pic!!!!
Posted via Mobile Device

No probs lol, it's easier to show it with the fender moved, lol
Posted via Mobile Device

[Hankster]

Originally Posted by motornut

if the truck has power locks and manual wimdows
the wires in the harness plugs are in different spots then with both
and get the rubber boots for the doors/wires

I know I'm digging up an old thread, but how hard is it to add the hole right there for the wires? Thanks all!

[motornut]

Originally Posted by Hankster

I know I'm digging up an old thread, but how hard is it to add the hole right there for the wires? Thanks all!

I guess the hole would need a "hole saw"for metal,not sure about how that would work