Front end rebuild Anyone else buy this kit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sambrutay · 04-19-2015, 07:09 PM

Looking to rebuild the front end on my 64 C10. I have priced front end parts individually and I am $400-450 range. I usually use MOOG. My question is this, Has anyone used this front end rebuild kit listed on ebay. Sellers feedback is good.

http://www.ebay.com/itm/1963-1964-CH...3D371300942311

**PGSigns** · 04-20-2015, 06:27 AM

I have not used the kit but when I did the 66 I was able to get a very good price on all Moog stuff from Amazon. I looked up all the numbers and saved about $150.
Jimmy

**Clyde65** · 04-20-2015, 08:00 AM

I used one from ECE, totally complete and all MOOG parts ( High quality).

Second option, you have to select your truck year and power or manual steering.

http://www.earlyclassic.com/catalog.aspx

GVDobler · 04-20-2015, 03:38 PM

The kit on Ebay is all rubber, which is close to original issue. Although I don't think the rubber is as good as it was on the originals.

If you want Moog then you have to step up on price. I am going with Moog, although I'm not exactly sure why.

Every fifty years we have to make this same decision. ha

Figuarus · 04-20-2015, 07:04 PM

I spoke to this very person, and asked where he sourced all the parts from. his response was that because he had a low cost on the components, he couldn't divulge who provided the parts. He wouldn't even confirm if the provider was domestic or imported.

He sells this stuff about an hour away from me. I was planning to buy a kit since it would be better than what I have on my truck now, but I hate the idea of running cheap chinese crap on my truck.

GVDobler · 04-20-2015, 08:44 PM

Well, I think he answered you. It sounds like the cheapest import he could find, which of course would be Chinese. Don't know how well their rubber would hold up.

Summit has good prices on Moog. You can find all the part numbers first on Moog's website, then shop by brand at Summit and put in each part. Sometimes, I have found that if you shop by truck ID, it tends to miss parts, but by Moog part number, it always seems to find them.

A little over $400 vs $260 for Chinese is a very easy choice.

Thiessen1960 · 04-20-2015, 09:38 PM

I am also having the problem of finding good parts but for my 1960, CPP does make a kit for about $320 but I dont know if its any good and I know my front end is usually quite expensive to rebuild.

sambrutay · 04-21-2015, 07:46 AM

Quote:

Originally Posted by Figuarus

I spoke to this very person, and asked where he sourced all the parts from. his response was that because he had a low cost on the components, he couldn't divulge who provided the parts. He wouldn't even confirm if the provider was domestic or imported.

He sells this stuff about an hour away from me. I was planning to buy a kit since it would be better than what I have on my truck now, but I hate the idea of running cheap chinese crap on my truck.

Good to know. Looks like I will buy MOOG.
Thanks all for the input.
Bruce

ACK · 04-21-2015, 01:45 PM

Believe it or not, I've found Moog and other C10 parts on Amazon.com at really good prices.

sambrutay · 04-22-2015, 07:38 AM

Quote:

Originally Posted by ACK

Believe it or not, I've found Moog and other C10 parts on Amazon.com at really good prices.

Well, I decided not to buy the kit in question. I took ACK's recommendation and checked AMAZON. Prices were right. Got every thing coming my way excluding pitman arm. $398.00
I was cool with that.

04-19-2015, 07:09 PM	#1
sambrutay Registered User Join Date: Dec 2010 Location: Louisville KY Posts: 620	Front end rebuild Anyone else buy this kit? Looking to rebuild the front end on my 64 C10. I have priced front end parts individually and I am $400-450 range. I usually use MOOG. My question is this, Has anyone used this front end rebuild kit listed on ebay. Sellers feedback is good. http://www.ebay.com/itm/1963-1964-CH...3D371300942311 __________________ Bruce 1964 C10 SWB #Junk 1979 C10 utility #cargopants (sold) 1971 GMC Sprint (sold) 1974 GMC Grande Sierra (sold)

04-20-2015, 06:27 AM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Front end rebuild Anyone else buy this kit? I have not used the kit but when I did the 66 I was able to get a very good price on all Moog stuff from Amazon. I looked up all the numbers and saved about $150. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

04-20-2015, 08:00 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: Front end rebuild Anyone else buy this kit? I used one from ECE, totally complete and all MOOG parts ( High quality). Second option, you have to select your truck year and power or manual steering. http://www.earlyclassic.com/catalog.aspx __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

04-20-2015, 03:38 PM	#4
GVDobler Registered User Join Date: May 2012 Location: Las Vegas NV Posts: 122	Re: Front end rebuild Anyone else buy this kit? The kit on Ebay is all rubber, which is close to original issue. Although I don't think the rubber is as good as it was on the originals. If you want Moog then you have to step up on price. I am going with Moog, although I'm not exactly sure why. Every fifty years we have to make this same decision. ha __________________ Jon S 1966 GMC Suburban 305 V6 Las Vegas NV

04-20-2015, 07:04 PM	#5
Figuarus Registered User Join Date: Sep 2014 Location: Salt Lake City, UT Posts: 346	Re: Front end rebuild Anyone else buy this kit? I spoke to this very person, and asked where he sourced all the parts from. his response was that because he had a low cost on the components, he couldn't divulge who provided the parts. He wouldn't even confirm if the provider was domestic or imported. He sells this stuff about an hour away from me. I was planning to buy a kit since it would be better than what I have on my truck now, but I hate the idea of running cheap chinese crap on my truck. __________________ 2013 Malibu LTZ 1996 C1500 4.3/5spd 2wd

04-20-2015, 08:44 PM	#6
GVDobler Registered User Join Date: May 2012 Location: Las Vegas NV Posts: 122	Re: Front end rebuild Anyone else buy this kit? Well, I think he answered you. It sounds like the cheapest import he could find, which of course would be Chinese. Don't know how well their rubber would hold up. Summit has good prices on Moog. You can find all the part numbers first on Moog's website, then shop by brand at Summit and put in each part. Sometimes, I have found that if you shop by truck ID, it tends to miss parts, but by Moog part number, it always seems to find them. A little over $400 vs $260 for Chinese is a very easy choice. __________________ Jon S 1966 GMC Suburban 305 V6 Las Vegas NV

04-20-2015, 09:38 PM	#7
Thiessen1960 Registered User Join Date: Apr 2012 Location: Lethbridge, Alberta Posts: 117	Re: Front end rebuild Anyone else buy this kit? I am also having the problem of finding good parts but for my 1960, CPP does make a kit for about $320 but I dont know if its any good and I know my front end is usually quite expensive to rebuild.

04-21-2015, 01:45 PM	#9
ACK Registered User Join Date: Oct 2012 Location: Philly, PA Posts: 537	Re: Front end rebuild Anyone else buy this kit? Believe it or not, I've found Moog and other C10 parts on Amazon.com at really good prices. __________________ My truck ain't dead, it just smells funny.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.