Possible LS Swap Shop or Ready to Run Pkg - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nohassle5 · 04-25-2015, 05:13 PM

Is there a shop that specializes in LS swaps near Nashville or anywhere in the south? Pretty new to the entire situation (700 miles on my build), and I'm not a wrench myself. Looking at a motor swap and the LS has been on the radar since I did my build. Or is there someone that has an entire LS Swap Package available that I could purchase that my builder could install? Someone with a ton of experience to minimize the issues that arise.
Coming from a 327/TH400 setup that is not exciting me since my daily driver is a 6.2 with a diablo tune. Thanks guys.

BR3W CITY · 04-25-2015, 05:32 PM

Full packages exist but they you pay a rediculous premium for them. The easiest way is to locate a donor vehicle (truck, car, medium duty, whatever) and take all the parts you need from that vehicle. That way everything is already in place, and the only other parts you need would be aftermarket stuff like having the harness done (or at least reworked).

A shop thats done LS swaps before would have no problem doing the job with a donor vehicle, unless they INSIST that they source the parts for you.

Nitis · 04-25-2015, 05:56 PM

PM sent

**GMC-YA68** · 04-26-2015, 12:25 AM

Also sent you a PM. Have a good friend that owns 417 Motorsports that does nothing but this....

jadedbird · 04-26-2015, 03:10 AM

So which is Preferred? gen iii or gen iv? What's the pros/cons?

Nohassle5 · 04-27-2015, 11:45 AM

Thanks for the PMs and the counsel. Still trying to decide what to do.

Andy4639 · 04-27-2015, 11:28 PM

Rob owner operator of 'No Limit' is a memeber here. He just moved his California shop to Dandridge, Tennessee

He would be more than helpful in a swap.

http://www.nolimitengineering.com/products

04-25-2015, 05:13 PM	#1
Nohassle5 Registered User Join Date: Nov 2014 Location: Nashville, tn Posts: 31	Possible LS Swap Shop or Ready to Run Pkg Is there a shop that specializes in LS swaps near Nashville or anywhere in the south? Pretty new to the entire situation (700 miles on my build), and I'm not a wrench myself. Looking at a motor swap and the LS has been on the radar since I did my build. Or is there someone that has an entire LS Swap Package available that I could purchase that my builder could install? Someone with a ton of experience to minimize the issues that arise. Coming from a 327/TH400 setup that is not exciting me since my daily driver is a 6.2 with a diablo tune. Thanks guys. __________________ 71 C-10 Suburban (In Progress) 70 C-10, Short & Wide SOLD 64 C-30, Custom Dually Cummins 12V SOLD

04-25-2015, 05:32 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Possible LS Swap Shop or Ready to Run Pkg Full packages exist but they you pay a rediculous premium for them. The easiest way is to locate a donor vehicle (truck, car, medium duty, whatever) and take all the parts you need from that vehicle. That way everything is already in place, and the only other parts you need would be aftermarket stuff like having the harness done (or at least reworked). A shop thats done LS swaps before would have no problem doing the job with a donor vehicle, unless they INSIST that they source the parts for you. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

04-25-2015, 05:56 PM	#3
Nitis Registered User Join Date: Apr 2014 Location: NOR-CAL Posts: 1,134	Re: Possible LS Swap Shop or Ready to Run Pkg PM sent

04-26-2015, 12:25 AM	#4
GMC-YA68 Senior Member Join Date: Mar 2004 Location: Lee's Summit, MO (KC) Posts: 742	Re: Possible LS Swap Shop or Ready to Run Pkg Also sent you a PM. Have a good friend that owns 417 Motorsports that does nothing but this.... __________________ -Keegan- '72 Jimmy 4x4 - 5.3/4L65E/NP205 swap http://67-72chevytrucks.com/vboard/s...d.php?t=663780

04-26-2015, 03:10 AM	#5
jadedbird Registered User Join Date: Apr 2015 Location: So Indiana Posts: 139	Re: Possible LS Swap Shop or Ready to Run Pkg So which is Preferred? gen iii or gen iv? What's the pros/cons?

04-27-2015, 11:45 AM	#6
Nohassle5 Registered User Join Date: Nov 2014 Location: Nashville, tn Posts: 31	Re: Possible LS Swap Shop or Ready to Run Pkg Thanks for the PMs and the counsel. Still trying to decide what to do. __________________ 71 C-10 Suburban (In Progress) 70 C-10, Short & Wide SOLD 64 C-30, Custom Dually Cummins 12V SOLD

04-27-2015, 11:28 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Possible LS Swap Shop or Ready to Run Pkg Rob owner operator of 'No Limit' is a memeber here. He just moved his California shop to Dandridge, Tennessee He would be more than helpful in a swap. http://www.nolimitengineering.com/products __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.