Re: rockwell t221 transfercase coupler needed badly
Quote:
Originally Posted by BLT gmc
68 Terry gmc had two very similar posts on 4/19 within a couple of hours. In the other thread we discussed using a NP 205 coupler. It had to be shortened to 3 3/8th inches, the internal teeth had to be machined to match the T221 coupler and a new seal with larger internal diameter had to be used. The National Seal # is 40071s (thank you to Vero 67). I am pretty sure this is the way Terry was going. Jordan I mention this- One,save you digging and two, it may help someone keep their Rockwell rolling without finding the elusive coupler. Bruce
|
I didn't catch the other thread, sorry!! Anyways I have the coupler if it is still needed. Also have the adapter.
__________________
It had to be done.
|