Where exactly do the k5 emblems go - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orange72blazer · 10-21-2005, 10:25 PM

I need to drill some holes in my fenders to put the k5 emblems on, I'm wondering if someone could give me the location of the holes. If I could get a measurement of how far the holes are from the back edge of the fender and how far up from the body line just above the lower trim that would be great.
Thanks

LUV2XCLR8 · 10-21-2005, 10:34 PM

No factory assembly manual here, but I would think it has that info?
Maybe not, I'm interested in the outcome of this, seeing as I'll have
the same problem some day when I go to put mine on, any 1 know?

chevy_fatman · 10-22-2005, 03:02 AM

This is a shot of my blazer and it gives you the general location of the emblems, I may be able to get more accurate measurements tomorrow if they are in the factory assembly manual or if I can find them, as you know that manual has no index and it'll take a while to go through something that's almost 2 in. thick

chevy_fatman · 10-22-2005, 03:05 AM

OPss! a picture might help, huh? the "R" is MIA on the driver side but I have replacements ready to go.

*72CSTC5* · 10-22-2005, 11:19 AM

I have the fenders off of my blazer right now and let me go and take a measurement for you guy and I will bet back to you shortly. I have to go in to work this morning and one of them is up there.

vtblazer · 10-22-2005, 07:27 PM

Some K5 emblems are two pin and some are three.

orange72blazer · 10-22-2005, 09:11 PM

Mine are 3 pins, as long as I get a location for the 2 lower pins I can figure the other one out. I have a couple more questions, I want to put my CST emblems on also, can someone get me a measurement from the front edge of the door to the front edge of the CST emblem? When I drill the holes is there some sort of paint or primer I should put on the bare metal to keep it from rusting? Thanks

chevy_fatman · 10-22-2005, 09:25 PM

Here's a crappy pic of the only diagram I found in the manual, hopes it helps.

The pic shows the original emblems had 3 pins, maybe the ones with only two are repops

orange72blazer · 10-22-2005, 09:33 PM

The pic shows the original emblems had 3 pins, maybe the ones with only two are repops

[/QUOTE]
My emblems have 3 pins and are NOS GM, so that could be. The picture helps a little but not a whole lot, I still don't know where on the fender to put the emblem, but thanks anyway.

*72CSTC5* · 10-23-2005, 12:43 PM

Sorry I got busy yesterday at work. Let me take a pic of my fender for you and try to get some measurements. I need to remember how to post a pic too!!!

red71cheyenne · 10-23-2005, 11:20 PM

Here ya go!

orange72blazer · 10-24-2005, 08:20 AM

Quote:

Originally Posted by red71cheyenne

Here ya go!

Thanks, thats just what I was looking for.

**special-K** · 10-24-2005, 07:29 PM

They`re in the same place as your truck emblems.

orange72blazer · 10-24-2005, 08:04 PM

Quote:

Originally Posted by special-K

They`re in the same place as your truck emblems.

I compared the measurements members are giving me to my truck fender and the hole closest to the door is the same the other one is in a different location, the k5 blazer emblem is longer. I drilled the holes in my old bent up GMC fender and I think I have it figured out.

az1970k5 · 07-01-2015, 08:16 PM

I know it's an older thread but I read on one of the posts, there are 2 pin k5 blazer emblems and 3 pin k5 blazer emblems. My 70 blazer has 2 holes on the fender for the k5 blazer emblem, LMC sells the 3 pin emblems. Are they the same exact emblems with the exeption of the extra pin??
Thanks

10-21-2005, 10:25 PM	#1
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Where exactly do the k5 emblems go I need to drill some holes in my fenders to put the k5 emblems on, I'm wondering if someone could give me the location of the holes. If I could get a measurement of how far the holes are from the back edge of the fender and how far up from the body line just above the lower trim that would be great. Thanks __________________ 1972 Chevy Blazer 1997 GMC Sierra 2009 Chevy Tahoe

10-21-2005, 10:34 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Where exactly do the k5 emblems go No factory assembly manual here, but I would think it has that info? Maybe not, I'm interested in the outcome of this, seeing as I'll have the same problem some day when I go to put mine on, any 1 know? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-22-2005, 03:02 AM	#3
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Re: Where exactly do the k5 emblems go This is a shot of my blazer and it gives you the general location of the emblems, I may be able to get more accurate measurements tomorrow if they are in the factory assembly manual or if I can find them, as you know that manual has no index and it'll take a while to go through something that's almost 2 in. thick __________________ Paul How do you make the invisible, visible?.........You take it away.

10-22-2005, 03:05 AM	#4
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Re: Where exactly do the k5 emblems go OPss! a picture might help, huh? the "R" is MIA on the driver side but I have replacements ready to go. Attached Images __________________ Paul How do you make the invisible, visible?.........You take it away.

10-22-2005, 11:19 AM	#5
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Re: Where exactly do the k5 emblems go I have the fenders off of my blazer right now and let me go and take a measurement for you guy and I will bet back to you shortly. I have to go in to work this morning and one of them is up there.

10-22-2005, 07:27 PM	#6
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Where exactly do the k5 emblems go Some K5 emblems are two pin and some are three.

10-22-2005, 09:11 PM	#7
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Re: Where exactly do the k5 emblems go Mine are 3 pins, as long as I get a location for the 2 lower pins I can figure the other one out. I have a couple more questions, I want to put my CST emblems on also, can someone get me a measurement from the front edge of the door to the front edge of the CST emblem? When I drill the holes is there some sort of paint or primer I should put on the bare metal to keep it from rusting? Thanks __________________ 1972 Chevy Blazer 1997 GMC Sierra 2009 Chevy Tahoe Last edited by orange72blazer; 10-22-2005 at 09:21 PM.

10-22-2005, 09:25 PM	#8
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Re: Where exactly do the k5 emblems go Here's a crappy pic of the only diagram I found in the manual, hopes it helps. The pic shows the original emblems had 3 pins, maybe the ones with only two are repops Attached Images __________________ Paul How do you make the invisible, visible?.........You take it away.

10-22-2005, 09:33 PM	#9
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Re: Where exactly do the k5 emblems go The pic shows the original emblems had 3 pins, maybe the ones with only two are repops [/QUOTE] My emblems have 3 pins and are NOS GM, so that could be. The picture helps a little but not a whole lot, I still don't know where on the fender to put the emblem, but thanks anyway. __________________ 1972 Chevy Blazer 1997 GMC Sierra 2009 Chevy Tahoe

10-23-2005, 12:43 PM	#10
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Re: Where exactly do the k5 emblems go Sorry I got busy yesterday at work. Let me take a pic of my fender for you and try to get some measurements. I need to remember how to post a pic too!!!

10-23-2005, 11:20 PM	#11
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Where exactly do the k5 emblems go Here ya go! __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty Last edited by red71cheyenne; 10-04-2007 at 08:37 PM.

10-24-2005, 07:29 PM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Where exactly do the k5 emblems go They`re in the same place as your truck emblems. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-01-2015, 08:16 PM	#15
az1970k5 Registered User Join Date: Feb 2014 Location: Tucson,Az Posts: 128	Re: Where exactly do the k5 emblems go I know it's an older thread but I read on one of the posts, there are 2 pin k5 blazer emblems and 3 pin k5 blazer emblems. My 70 blazer has 2 holes on the fender for the k5 blazer emblem, LMC sells the 3 pin emblems. Are they the same exact emblems with the exeption of the extra pin?? Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.