The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-19-2015, 08:29 AM   #1
Lambchop76
Registered User
 
Join Date: Nov 2013
Location: Cumming, ga
Posts: 91
Brake/turn signal issue

I have an 87 Silverado R10 and my left rear blinker and brake light no longer work. I replaced the bulbs and sockets with the LED conversion from LMC a year ago. Everything worked great up until 2 weeks ago. I have chased and stabbed wires with a test light all the way to the column and there doesn't seem to be power to the yellow wire for that light. Could my problem be in the column in the signal switch? The left front blinker works fine though. I am completely stumped and aggravated. Any insight is greatly appreciated
Lambchop76 is offline   Reply With Quote
Old 07-19-2015, 08:59 AM   #2
J Knight
Registered User
 
J Knight's Avatar
 
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
Re: Brake/turn signal issue

If you cant get power past the signal switch my guess would be a bad signal switch also.
__________________
John
82 Chevy Silverado 350ci/TH350
J Knight is offline   Reply With Quote
Old 07-19-2015, 10:28 AM   #3
JacobSchni
Registered User
 
JacobSchni's Avatar
 
Join Date: Feb 2014
Location: Mukwonago, WI
Posts: 268
Re: Brake/turn signal issue

check for a good ground on the bed and the bed to frame
JacobSchni is offline   Reply With Quote
Old 07-19-2015, 10:43 AM   #4
Lambchop76
Registered User
 
Join Date: Nov 2013
Location: Cumming, ga
Posts: 91
Re: Brake/turn signal issue

Quote:
Originally Posted by JacobSchni View Post
check for a good ground on the bed and the bed to frame
Would that cause the lack of power to that yellow wire under the dash?
Lambchop76 is offline   Reply With Quote
Old 07-19-2015, 11:46 AM   #5
Titomars
Registered User
 
Titomars's Avatar
 
Join Date: Feb 2015
Location: Santa Rosa, Ca.
Posts: 539
Re: Brake/turn signal issue

Quote:
Originally Posted by Lambchop76 View Post
Would that cause the lack of power to that yellow wire under the dash?
Nope.
If you have no power from the yellow wire at the T/S switch harness connector the switch has failed or the wire running up the column is broken between the connector and the switch itself. Personally I would just replace the switch since it has to come out to inspect it anyway.
__________________
1977 Chevrolet C/10 Silverado. Step-Side, Factory 454, TH400, 3.73 Posi 12 Bolt.
1975 Chevrolet El Camino. 350, TH400, 3.08 Posi 10 Bolt.
Titomars is offline   Reply With Quote
Old 07-19-2015, 01:34 PM   #6
Lambchop76
Registered User
 
Join Date: Nov 2013
Location: Cumming, ga
Posts: 91
Re: Brake/turn signal issue

Quote:
Originally Posted by Titomars View Post
Nope.
If you have no power from the yellow wire at the T/S switch harness connector the switch has failed or the wire running up the column is broken between the connector and the switch itself. Personally I would just replace the switch since it has to come out to inspect it anyway.
Ok that's what I was thinking. I replaced the steering wheel with one from a 62 bel air, and the canceling mechanism was not compatible with the older wheel. So I removed it and just have to manually cancel the blinkers. I thought that may have something to do with the switch failing
Lambchop76 is offline   Reply With Quote
Reply

Bookmarks

Tags
brake light, switch, turn signal


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com