How to tell if truck was originally a 6 or V8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

srwhite57 · 07-28-2015, 09:52 AM

Is there some way on the Chevy 64-66 trucks to tell via the vin or data plate if the truck was originally a 6 or V8?

**TJ's Chevy** · 07-28-2015, 10:22 AM

Well, best way would be to find out what engine it has currently. If it has a 350...more than likely it had a straight 6. If it has a 283 or 327 it could be original. If you can give me the year and what engine/tranny it has currently I can probably make an accurate guess. lol

1963c-10 · 07-28-2015, 10:36 AM

Quote:

Originally Posted by srwhite57

Is there some way on the Chevy 64-66 trucks to tell via the vin or data plate if the truck was originally a 6 or V8?

No way to tell off the VIN or data plate. If you get lucky enough to find a build sheet in the seat it would say which motor it came with.

srwhite57 · 07-28-2015, 04:54 PM

Thanks. That's what I was afraid of. Was actually looking at an instrument cluster wth tach from a donor truck. No motor in truck. My understanding is there are 2 different tachs, one for a 6 and one for a V8. Could not tell the difference unless the tach is out of the cluster, and then only by the part number.

**aerotruk63** · 07-28-2015, 04:57 PM

Canadian VIN numbers indicated whether there was a 6 or 8.
You could look on the frame to see if there's scars from the engine mounts being moved.
The engine wiring harnesses were different.
The rad cores is sometimes an indicator.
Length of the original battery cables.
Some more experienced guys will correct and add to this.

**aerotruk63** · 07-28-2015, 04:59 PM

There were no tachs in a light duty trucks if it came with a 6.

**TJ's Chevy** · 07-28-2015, 05:35 PM

No engine in the truck...are the mounts still there? If you could show us a picture of them we may be able to tell.

padresag · 07-28-2015, 06:36 PM

Quote:

Originally Posted by TJ's Chevy

No engine in the truck...are the mounts still there? If you could show us a picture of them we may be able to tell.

how can you tell by the mounts as they were the same except for the 292
throttle bellcranks are different though between v8 and inlne 6
ron

LT1 Burb · 07-28-2015, 06:42 PM

You can tell by where the radiator lower brakets are mounted, down low on crossmember is 6cyl, higher and towards front is 8 cyl.
.

07-28-2015, 09:52 AM	#1
srwhite57 Registered User Join Date: Jul 2011 Location: Tyler, Texas Posts: 4	How to tell if truck was originally a 6 or V8 Is there some way on the Chevy 64-66 trucks to tell via the vin or data plate if the truck was originally a 6 or V8?

07-28-2015, 10:22 AM	#2
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: How to tell if truck was originally a 6 or V8 Well, best way would be to find out what engine it has currently. If it has a 350...more than likely it had a straight 6. If it has a 283 or 327 it could be original. If you can give me the year and what engine/tranny it has currently I can probably make an accurate guess. lol __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

07-28-2015, 04:54 PM	#4
srwhite57 Registered User Join Date: Jul 2011 Location: Tyler, Texas Posts: 4	Re: How to tell if truck was originally a 6 or V8 Thanks. That's what I was afraid of. Was actually looking at an instrument cluster wth tach from a donor truck. No motor in truck. My understanding is there are 2 different tachs, one for a 6 and one for a V8. Could not tell the difference unless the tach is out of the cluster, and then only by the part number.

07-28-2015, 04:57 PM	#5
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: How to tell if truck was originally a 6 or V8 Canadian VIN numbers indicated whether there was a 6 or 8. You could look on the frame to see if there's scars from the engine mounts being moved. The engine wiring harnesses were different. The rad cores is sometimes an indicator. Length of the original battery cables. Some more experienced guys will correct and add to this. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-28-2015, 04:59 PM	#6
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: How to tell if truck was originally a 6 or V8 There were no tachs in a light duty trucks if it came with a 6. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-28-2015, 05:35 PM	#7
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: How to tell if truck was originally a 6 or V8 No engine in the truck...are the mounts still there? If you could show us a picture of them we may be able to tell. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

07-28-2015, 06:42 PM	#9
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: How to tell if truck was originally a 6 or V8 You can tell by where the radiator lower brakets are mounted, down low on crossmember is 6cyl, higher and towards front is 8 cyl. .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.