another small block header question! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chazlll · 09-09-2015, 04:56 AM

I'm running a 350 small block with a set of trick flow G1 heads in my 66 GMC. 1/2 ton 2wheel drive.
The problem is that I have the forward mounts & angle plugs.
Can any one help.
Summit racing sent me set & said that they would work but they hit the frame.
If you can tell me what you are running & how much you had to do to make them work.

siggyfreud · 09-09-2015, 10:14 AM

I also have trickflows with angle plugs in my 66. When I get to work I'll look up the part number of the headers I use that work and send it your way.

**Chevy Fleetside** · 09-09-2015, 10:14 AM

Looks like you got your answer.

siggyfreud · 09-09-2015, 11:53 AM

Here is what I ordered and they fit my SBC. My SBC is also moved forward a bit compared to the stock location.

http://www.summitracing.com/parts/HED-69890

**Captainfab** · 09-09-2015, 11:39 PM

Looking at pics in your build thread, will a 90* boot work on #5 or is a straight boot needed?

Quote:

Originally Posted by siggyfreud

Here is what I ordered and they fit my SBC. My SBC is also moved forward a bit compared to the stock location.

http://www.summitracing.com/parts/HED-69890

siggyfreud · 09-10-2015, 12:52 AM

For these headers a straight is needed for 5. When I made the wires I made then for the old headers, but those hit the frame/crossmember. I'm not crazy about the routing of #6 and will try and clean it up a bit to be inside the header. OP if you look at page 2 of my build thread you can see the headers on the engine.

09-09-2015, 04:56 AM	#1
chazlll Registered User Join Date: Jul 2012 Location: flint michigan Posts: 37	another small block header question! I'm running a 350 small block with a set of trick flow G1 heads in my 66 GMC. 1/2 ton 2wheel drive. The problem is that I have the forward mounts & angle plugs. Can any one help. Summit racing sent me set & said that they would work but they hit the frame. If you can tell me what you are running & how much you had to do to make them work. Attached Images

09-09-2015, 10:14 AM	#2
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: another small block header question! I also have trickflows with angle plugs in my 66. When I get to work I'll look up the part number of the headers I use that work and send it your way. __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.

09-09-2015, 10:14 AM	#3
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,780	Re: another small block header question! Looks like you got your answer. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

09-09-2015, 11:53 AM	#4
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: another small block header question! Here is what I ordered and they fit my SBC. My SBC is also moved forward a bit compared to the stock location. http://www.summitracing.com/parts/HED-69890 __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.

09-10-2015, 12:52 AM	#6
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: another small block header question! For these headers a straight is needed for 5. When I made the wires I made then for the old headers, but those hit the frame/crossmember. I'm not crazy about the routing of #6 and will try and clean it up a bit to be inside the header. OP if you look at page 2 of my build thread you can see the headers on the engine. __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.