Kick panels with speaker from brothers trucks installation?

[Ghernandez66]

Has any one installed this kick panels I just received mine but they have no installation instructions and I don't see how they will be held in place they have no holes for screws or anything that will hold em in place...I hope someone can help .
Thanks in advance.

[Steve66]

I used two sided tape and a few screws in discreet locations for mine.

[Ghernandez66]

Originally Posted by Steve66

I used two sided tape and a few screws in discreet locations for mine.

Do you have any pictures of this?

[chevy_mike]

3M Dual Lock works great for this type of stuff. It's like velcro on steroids. Rod Doors who used to make aftermarket interior panels for cars and trucks, use this stuff to secure door and roof panels. Once locked in, you almost need a screw driver to pry it apart. Way back I used it to hold a CD Changer on the back wall of my truck.

Amazon sells it. Put some 1-2" pieces around the edge of the kick panel, clean the metal area and press it on. You'll be good to go.

Amazon.com: 3M Dual Lock Reclosable Fastener...

[Chevy Fleetside]

Originally Posted by chevy_mike

3M Dual Lock works great for this type of stuff. It's like velcro on steroids. Rod Doors who used to make aftermarket interior panels for cars and trucks, use this stuff to secure door and roof panels. Once locked in, you almost need a screw driver to pry it apart. Way back I used it to hold a CD Changer on the back wall of my truck.

Amazon sells it. Put some 1-2" pieces around the edge of the kick panel, clean the metal area and press it on. You'll be good to go.

Amazon.com: 3M Dual Lock Reclosable Fastener TB3550 250/250 Black, 1 in x 10 ft (1 Mated Strip/Bag): Industrial & Scientific

I have rod door panels. The mounting system sucks. I am making it better. Kick panels will probably work ok but making them stick is the hard part. Some stick real well and some don't.