New 1960-66 swb fleetside bed kits! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flashed · 12-23-2015, 11:06 PM

When would be a good time to call you to talk about my Vintage Air situation in my 72 Chevy truck ?

Nsanehotrodz · 12-24-2015, 06:56 PM

Quote:

Originally Posted by flashed

When would be a good time to call you to talk about my Vintage Air situation in my 72 Chevy truck ?

I will be back in the shop Monday morning. So anytime next week will work.

Vinceg · 12-30-2015, 11:33 AM

I have a few questions for you if you don't mind? First have you heard anything about 66 long box replacement panels? I've heard about them coming and the short bed sides sure look good! Second what kind of price range for both long and short bed sides? I can't decide if I want to shorten my frame or not. I have the frame striped and I need to get a drive shaft made for the new 700r4 sitting in the rails now anyhow. If there is no word on LB sides it might make my decision a whole lot easier! Lol!

Joemomma1 · 12-30-2015, 12:43 PM

Quote:

Originally Posted by Vinceg

I have a few questions for you if you don't mind? First have you heard anything about 66 long box replacement panels? I've heard about them coming and the short bed sides sure look good! Second what kind of price range for both long and short bed sides? I can't decide if I want to shorten my frame or not. I have the frame striped and I need to get a drive shaft made for the new 700r4 sitting in the rails now anyhow. If there is no word on LB sides it might make my decision a whole lot easier! Lol!

Go with short. The fewer long beds in the world the better!

Vinceg · 12-30-2015, 01:35 PM

I just figure that where I'm at right now it might not be that much more work. I also didn't mention that I'm up here in Canada. I always find it interesting to see how much more we end up paying. That and the dollar is killing the price also. It suck!

Nsanehotrodz · 12-30-2015, 06:05 PM

Quote:

Originally Posted by Vinceg

I have a few questions for you if you don't mind? First have you heard anything about 66 long box replacement panels? I've heard about them coming and the short bed sides sure look good! Second what kind of price range for both long and short bed sides? I can't decide if I want to shorten my frame or not. I have the frame striped and I need to get a drive shaft made for the new 700r4 sitting in the rails now anyhow. If there is no word on LB sides it might make my decision a whole lot easier! Lol!

I don't have a date set on the LWB bedsides right now. Our swb fleet bedsides are on sale for $510ea. Let me know if we can help you! Thanks

j.kirn · 12-30-2015, 07:44 PM

I was a little confused at first when you said our parts fit good, but after reading you use parts from overseas that fit well correct?

j.kirn · 01-03-2016, 11:34 PM

Quote:

Originally Posted by j.kirn

I was a little confused at first when you said our parts fit good, but after reading you use parts from overseas that fit well correct?

????????????

LT1 Burb · 01-04-2016, 12:48 AM

I worked on my bedsides today, the wheel well holes were slightly off but no biggie.

**MikeN** · 01-04-2016, 06:28 PM

Quote:

Originally Posted by j.kirn

????????????

kenwkirk · 12-31-2015, 11:13 PM

The new bedsides look "GREAT" !!!!!!! it would have been nice if they could/would have been slightly modified so that the rear tires would have had the appearance of being more centered in the wheel well ???? ---- with that being said ,,, is there any simple way to move the rear-end back a couple of inches or so in order to squeeze more tire under it without it rubbing on the front edge ??? once again they do look NICE

Nsanehotrodz · 01-01-2016, 08:15 PM

Quote:

Originally Posted by kenwkirk

The new bedsides look "GREAT" !!!!!!! it would have been nice if they could/would have been slightly modified so that the rear tires would have had the appearance of being more centered in the wheel well ???? ---- with that being said ,,, is there any simple way to move the rear-end back a couple of inches or so in order to squeeze more tire under it without it rubbing on the front edge ??? once again they do look NICE

You could buy a set of adjustable trailing arms from www.pbfab.com

kenwkirk · 01-05-2016, 01:36 PM

Thank you Very Much sir ------ I wasn't really aware of that option ----- this is definitely a budget build --- with that being taken into consideration can I change just the trailing arms or is there more that is necessary in order to accomplish this ??? any help would be GREATLY APPRECIATED ---- anyone else cares to chime in feel free to ----- once again THANKS VERY MUCH

NevEno · 01-04-2016, 08:54 PM

Looking forward to seeing the new bed in person!

pappy 2 · 01-04-2016, 09:31 PM

Better save the doors on that truck, they just tore down the No. Loup Lumber Yard last year, to put up a new retail seed building. Spent a lot of my youth in No Loup, had better looking girls there than in Ord.
Pappy 2

**DPowers** · 01-11-2016, 08:10 PM

You must have just installed that as it wasn't there at the show on Sat???

Nsanehotrodz · 01-11-2016, 08:52 PM

Quote:

Originally Posted by DPowers

You must have just installed that as it wasn't there at the show on Sat???

Yeah we just finished the kit today! Everything is completely bolt in.

jlwilliams598 · 01-11-2016, 11:26 PM

When will the steel floor be available and what's the price?

jlwilliams598 · 01-11-2016, 11:27 PM

Do you combine shipping if I order several parts or is it easier to come and get them?

flashed · 01-13-2016, 09:28 PM

Dang ,that looks great .

sampsmit000 · 01-17-2016, 03:11 PM

How much for front fenders shipped to 84043

Nsanehotrodz · 01-18-2016, 01:59 PM

Quote:

Originally Posted by flashed

Dang ,that looks great .

Thanks!

Quote:

Originally Posted by sampsmit000

How much for front fenders shipped to 84043

PM sent!

schpeen · 01-18-2016, 04:35 PM

now if only someone offered
a new cab! LOL

looks awesome man nice work
thank you for sharing

Nsanehotrodz · 01-18-2016, 06:09 PM

Quote:

Originally Posted by schpeen

now if only someone offered
a new cab! LOL

looks awesome man nice work
thank you for sharing

Its funny you mention that

Here is a '64-66 cab I am building. This cab is the best one I have seen so far. This cab/doors will be available next month completely finished ready to paint. We also offer solid original paint cabs that you can finish yourself!

Rod Stryker · 01-19-2016, 01:06 PM

those doors look like they fit pretty good, might be in need of those soon....

12-23-2015, 11:06 PM	#1
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: New 1960-66 swb fleetside bed kits! When would be a good time to call you to talk about my Vintage Air situation in my 72 Chevy truck ?

12-30-2015, 11:33 AM	#3
Vinceg Registered User Join Date: Nov 2014 Location: Red Deer, Alberta, Canada Posts: 166	Re: New 1960-66 swb fleetside bed kits! I have a few questions for you if you don't mind? First have you heard anything about 66 long box replacement panels? I've heard about them coming and the short bed sides sure look good! Second what kind of price range for both long and short bed sides? I can't decide if I want to shorten my frame or not. I have the frame striped and I need to get a drive shaft made for the new 700r4 sitting in the rails now anyhow. If there is no word on LB sides it might make my decision a whole lot easier! Lol!

12-30-2015, 01:35 PM	#5
Vinceg Registered User Join Date: Nov 2014 Location: Red Deer, Alberta, Canada Posts: 166	Re: New 1960-66 swb fleetside bed kits! I just figure that where I'm at right now it might not be that much more work. I also didn't mention that I'm up here in Canada. I always find it interesting to see how much more we end up paying. That and the dollar is killing the price also. It suck!

12-30-2015, 07:44 PM	#7
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: New 1960-66 swb fleetside bed kits! I was a little confused at first when you said our parts fit good, but after reading you use parts from overseas that fit well correct?

01-04-2016, 12:48 AM	#9
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: New 1960-66 swb fleetside bed kits! I worked on my bedsides today, the wheel well holes were slightly off but no biggie. Attached Images

12-31-2015, 11:13 PM	#11
kenwkirk Registered User Join Date: May 2012 Location: Sunny South Posts: 52	Re: New 1960-66 swb fleetside bed kits! The new bedsides look "GREAT" !!!!!!! it would have been nice if they could/would have been slightly modified so that the rear tires would have had the appearance of being more centered in the wheel well ???? ---- with that being said ,,, is there any simple way to move the rear-end back a couple of inches or so in order to squeeze more tire under it without it rubbing on the front edge ??? once again they do look NICE

01-05-2016, 01:36 PM	#13
kenwkirk Registered User Join Date: May 2012 Location: Sunny South Posts: 52	Re: New 1960-66 swb fleetside bed kits! Thank you Very Much sir ------ I wasn't really aware of that option ----- this is definitely a budget build --- with that being taken into consideration can I change just the trailing arms or is there more that is necessary in order to accomplish this ??? any help would be GREATLY APPRECIATED ---- anyone else cares to chime in feel free to ----- once again THANKS VERY MUCH

01-04-2016, 08:54 PM	#14
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: New 1960-66 swb fleetside bed kits! Looking forward to seeing the new bed in person! __________________ You can find me on Instagram @neveno_cten

01-04-2016, 09:31 PM	#15
pappy 2 Registered User Join Date: Aug 2015 Location: ord, NE. Posts: 98	Re: New 1960-66 swb fleetside bed kits! Better save the doors on that truck, they just tore down the No. Loup Lumber Yard last year, to put up a new retail seed building. Spent a lot of my youth in No Loup, had better looking girls there than in Ord. Pappy 2

01-11-2016, 08:10 PM	#16
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,441	Re: New 1960-66 swb fleetside bed kits! You must have just installed that as it wasn't there at the show on Sat??? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-11-2016, 11:26 PM	#18
jlwilliams598 Registered User Join Date: Oct 2012 Location: Jackson, TN Posts: 11	Re: New 1960-66 swb fleetside bed kits! When will the steel floor be available and what's the price?

01-11-2016, 11:27 PM	#19
jlwilliams598 Registered User Join Date: Oct 2012 Location: Jackson, TN Posts: 11	Re: New 1960-66 swb fleetside bed kits! Do you combine shipping if I order several parts or is it easier to come and get them?

01-13-2016, 09:28 PM	#20
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: New 1960-66 swb fleetside bed kits! Dang ,that looks great .

01-17-2016, 03:11 PM	#21
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: New 1960-66 swb fleetside bed kits! How much for front fenders shipped to 84043 __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson

01-18-2016, 04:35 PM	#23
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: New 1960-66 swb fleetside bed kits! now if only someone offered a new cab! LOL looks awesome man nice work thank you for sharing __________________ 1991 K5 Blazer 4x4 "9 ball" 2019 Chevy Silverado Trail Boss 4x4 2018 Chevy Colorado 2 door ZR2 4x4 1988 23' Mako Marine 2005 Harley Davidson Road King



Register or Log In To remove these advertisements.

01-19-2016, 01:06 PM	#25
Rod Stryker Registered User Join Date: Apr 2015 Location: Livermore ca Posts: 23	Re: New 1960-66 swb fleetside bed kits! those doors look like they fit pretty good, might be in need of those soon....

Register or Log In To remove these advertisements.