The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > Squarebody Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-17-2011, 10:59 PM   #26
jltait
Registered User
 
Join Date: Mar 2010
Location: Eaton Rapids, MI
Posts: 97
Re: 87 Crew Cab 454/TH400 to Cummins/NV4500

Then I started to test fit the Cummins.
Attached Images
   
jltait is offline   Reply With Quote
Old 06-17-2011, 11:21 PM   #27
jltait
Registered User
 
Join Date: Mar 2010
Location: Eaton Rapids, MI
Posts: 97
Re: 87 Crew Cab 454/TH400 to Cummins/NV4500

About this time I confirmed an issue I previously suspected. Since this was an automatic 2wd truck Cab the manual transmission was not going to fit without either a raised transmission hump in the cab or body lift. I opted for a 2" body lift which gave me the amount of room I needed. Since I am so stubborn I opted to fabricate it, I picked up a stick of 3 1/2" diameter UHMW (Ultra-high-molecular-weight polyethylene) and had it cut into 2" biscuits. I then drilled them on a drill press and allocated the correct hardware. I had about $75 dollars in the body lift. I like that my biscuits are 3 1/2" in diameter, the ones in the kits are usually 2" or so. Afterward I did find that Performance Accessories make individual 3" pucks, this may have been a good option as it took me a lot of time to do fabricate. I do not have pictures of the body lift install at this time but I certainly could put it up on the lift and snap a few when I get a chance if someone is interested.
jltait is offline   Reply With Quote
Old 06-17-2011, 11:35 PM   #28
jltait
Registered User
 
Join Date: Mar 2010
Location: Eaton Rapids, MI
Posts: 97
Re: 87 Crew Cab 454/TH400 to Cummins/NV4500

Okay, once the body lift was in it was time to continue moving forward with fitment and mounts. I mimicked the drive line angle of the 454/th400 very closely. I was also able to find a mounting location that eliminate the need for drive shaft modifications. The NV4500 output yoke was moved rearward slightly compared to the TH400, but I was able to compensate by moving the carrier bearing rearward slightly ( the hose are slightly slotted). The original cross member was also re-used by cutting clearance in it for the larger NV4500 tail housing. I was able to bolt it through the original hole by rotating the rubber transmission mount (that came with the NV4500) 180* The stud is offset front to rear slightly and this compensated for the difference almost perfectly. Unfortunately I did not get photos of these aspect but when I get a chance I can put it up on my lift and get pictures of this.
jltait is offline   Reply With Quote
Old 06-17-2011, 11:48 PM   #29
jltait
Registered User
 
Join Date: Mar 2010
Location: Eaton Rapids, MI
Posts: 97
Re: 87 Crew Cab 454/TH400 to Cummins/NV4500

So once everything was test fit with the transmission cross member and drive shaft in place I started fabricating motor mounts. I picked up 1/4 plate steel and a Lennox steel cutting blade for my circular saw. I came up with a design and CAD'd it up at work during breaks and lunches. I have access to CAD software at work. The first design centered around hanging the mount off the inside of the frame rail. after cutting one piece I decided to go back to the drawing board (err computer) and CAD'd up a second design that sat on the engine cross member ( not an option for 4x4's without replacing the crossmember). I have some pictures but none after they were deburred/welded/polished of surface rust/painted. Again I can get those and add them later but here are the pieces after cutting, then mocked up before deburring/welding.
Attached Images
     

Last edited by jltait; 06-17-2011 at 11:51 PM.
jltait is offline   Reply With Quote
Old 06-17-2011, 11:54 PM   #30
jltait
Registered User
 
Join Date: Mar 2010
Location: Eaton Rapids, MI
Posts: 97
Re: 87 Crew Cab 454/TH400 to Cummins/NV4500

Last update for tonight,
JLT
Attached Images
 
jltait is offline   Reply With Quote
Old 09-11-2012, 02:10 PM   #31
suxtobu65
Registered User
 
suxtobu65's Avatar
 
Join Date: Jul 2012
Location: Central Oklahoma
Posts: 147
Re: 87 Crew Cab 454/TH400 to Cummins/NV4500

Any updates sir?
suxtobu65 is offline   Reply With Quote
Old 07-23-2013, 12:10 AM   #32
spgill2000
Registered User
 
Join Date: Jan 2013
Location: Canterbury, CT
Posts: 20
Re: 87 Crew Cab 454/TH400 to Cummins/NV4500

What happened to this project?! Did it get finished?
Posted via Mobile Device
spgill2000 is offline   Reply With Quote
Old 10-12-2013, 07:19 PM   #33
spgill2000
Registered User
 
Join Date: Jan 2013
Location: Canterbury, CT
Posts: 20
Re: 87 Crew Cab 454/TH400 to Cummins/NV4500

Hello? Project fail...
spgill2000 is offline   Reply With Quote
Old 12-29-2015, 11:21 PM   #34
Bowtie_luvr
Registered User
 
Join Date: Dec 2015
Location: Eaton Rapids, Mi
Posts: 2
Re: 87 Crew Cab 454/TH400 to Cummins/NV4500

No project was not a fail. I had issues with my id/pwd here, family issues with my Dad's health and it came down to crunch time. I needed the truck, so I finished it (functional, never really finished) without any updated here. I was never able to get my profile here functional again, so I opened a new profile. I have several thousand miles on her now since the conversion. Injector lines have been the only reliability issue, I replaced them all with new Cummins lines shortly after the conversion and all has been well since. I am currently adding a Western Unimount plow.
Bowtie_luvr is offline   Reply With Quote
Reply

Bookmarks

Tags
crew cab, cummins, nv4500


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com