![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
![]() Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,637
|
Re: NP205 32 spline fig8 to GM NV4500???
Chris,
Thanks for jumping in with your experience with the Dana 60 vs a newer 14 bolt. Since this is a short bed '72 do not have plans to tow anything heavy. Steve thanks for your second on the good breaking capabilities of the drum Dana 60. What diameter where your rear drums, 11, 12, 13, along with width if you know. Mine are 12x2.5. This Dana 60 has what seems tobe larger shoes/drums then the original GM '71 size, they are 12x2.5. Have not looked at them for several months, but remember them being 1/2 inch wider then specifications for '71. Previous thread discussed certain GMC / Chevy as having the 2.5 wide drums, and that specs could be wrong, in that original trucks have 2.5 wide shoes. Any information on what were the largest drum brakes for the Dana 60 with stock axle length SRW, what models have them. A thread by Larry on " 11 inch to 13 inch... " also talked about bigger rear brakes, I think his information was on Dana 60 too, not sure. And I will do some research too. May be move the brake discussion to a new thread to make it easier for others to find. Thanks, Les Last edited by aotte1; 03-07-2016 at 06:18 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Feb 2007
Location: Star Valley, WY
Posts: 2,038
|
Re: NP205 32 spline fig8 to GM NV4500???
I'm pretty sure they were the larger 13" drums as this rear came from a mid 80's 1 ton but i don't remember what their width was. Very heavy. My 14bolt was a junk yard jewel and the pads and drums needed replaced so i decided to do the disk swap.
__________________
Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's |
![]() |
![]() |
![]() |
Bookmarks |
|
|