The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-08-2016, 01:38 PM   #1
Doogiew
Registered User
 
Join Date: Jan 2015
Location: Lacombe, Alberta
Posts: 5
68 K10 swap Manual to Auto - Help

Hello everyone - looking for advice to swap out my Muncie SM465 4 speed for a 700R4 Auto. Many questions:

Can I keep my existing transfer case and drive shafts?
any special bracket needed?

Thanks for any help you can provide!
Name:  181544025686_0.jpg
Views: 1107
Size:  13.1 KB
Attached Images
   
Doogiew is offline   Reply With Quote
Old 03-08-2016, 02:05 PM   #2
obijuan
Registered User
 
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
Re: 68 K10 swap Manual to Auto - Help

Id avoid the trans swap where you change the output shaft in the trans. Use the spacer instead and that keeps the front driveshaft from hitting the trans pan.
obijuan is offline   Reply With Quote
Old 03-08-2016, 02:07 PM   #3
Doogiew
Registered User
 
Join Date: Jan 2015
Location: Lacombe, Alberta
Posts: 5
Re: 68 K10 swap Manual to Auto - Help

thanks that is good to know!
Doogiew is offline   Reply With Quote
Old 03-08-2016, 10:58 PM   #4
obijuan
Registered User
 
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
Re: 68 K10 swap Manual to Auto - Help

Quote:
Originally Posted by Doogiew View Post
thanks that is good to know!
Also, you'll need a th 350 to 205 adapter as well as the 27 spline input gear to put into your np205 case. Requires disassembly. Driveshafts will likely not work as is. Maybe you could get away with a bolt in from the same truck the front shaft came from.
obijuan is offline   Reply With Quote
Old 03-09-2016, 03:13 AM   #5
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: 68 K10 swap Manual to Auto - Help

Do you know what t case you have now?
andrewmp6 is offline   Reply With Quote
Old 03-09-2016, 12:39 PM   #6
Doogiew
Registered User
 
Join Date: Jan 2015
Location: Lacombe, Alberta
Posts: 5
Re: 68 K10 swap Manual to Auto - Help

I am not sure what transfer case I have - here is a couple pictures of it.




Name:  IMG_6055.jpg
Views: 798
Size:  43.3 KB

Name:  IMG_6059.jpg
Views: 893
Size:  37.8 KB
Doogiew is offline   Reply With Quote
Old 03-09-2016, 01:14 PM   #7
Bigdav160
Registered User
 
Bigdav160's Avatar
 
Join Date: Apr 2011
Location: Klein Texas
Posts: 3,852
Re: 68 K10 swap Manual to Auto - Help

Rockwell 221. I'm not sure if it ever came with an automatic in front of it.
__________________
My Classics:
'72 K20 Suburban + '65 Dodge Town Wagon
'72 Corvette Roadster +'67 Corvette Roadster
'73 Z-28 Camaro
'63 Ford SWB Uni Pickup
'50 Ford Coupe
Bigdav160 is offline   Reply With Quote
Old 03-09-2016, 01:17 PM   #8
Doogiew
Registered User
 
Join Date: Jan 2015
Location: Lacombe, Alberta
Posts: 5
Re: 68 K10 swap Manual to Auto - Help

Thanks for the help!
Doogiew is offline   Reply With Quote
Old 03-10-2016, 04:31 AM   #9
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: 68 K10 swap Manual to Auto - Help

Its a rockwell and the bad news no one makes any replacement parts for it or even a swap adapter for it.The cheapest way would be a 700r4 with a np208 or np241 on it.You would have to have no driveshafts made for that.Next step up is 700r4 with a np205 swapped on it with a adapter kit.And that would probably need new driveshafts also.
andrewmp6 is offline   Reply With Quote
Old 03-12-2016, 09:35 PM   #10
dennislbrooks
Senior Member
 
dennislbrooks's Avatar
 
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,787
Re: 68 K10 swap Manual to Auto - Help

I used a np208 with a 27 spline input shaft for a 350 turbo or a 700r4 in my 67. I think the output is 32 and will be a slip yoke. Mine will have a 700r4 one of these days.
dennislbrooks is offline   Reply With Quote
Old 03-23-2016, 12:59 PM   #11
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: 68 K10 swap Manual to Auto - Help

I'd focus on finding a full setup out of a donor truck, to include the crossmember. You'll want a newer Transfer case as stated anyways. Worse case scenario is that you have to have a driveshaft cut or made but you'll be happier in the end with the right tranny. Right now it looks like you have the original Rockwell T221 transfer case and SM465 transmission, I assume with a Lo 1st gear (granny gear).

If you weren't worried about overdrive you could go with anything from the 70's.
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Old 03-23-2016, 07:50 PM   #12
Doogiew
Registered User
 
Join Date: Jan 2015
Location: Lacombe, Alberta
Posts: 5
Re: 68 K10 swap Manual to Auto - Help

Thanks I do want to find something out of a newer truck with overdrive, any ideas what transmission / transfer case combos would work. I don't mind getting the driveshaft modified. It would be nice to know what years of new chev trucks would fit and then buy a complete package from a donor truck.
Doogiew is offline   Reply With Quote
Old 03-23-2016, 11:32 PM   #13
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: 68 K10 swap Manual to Auto - Help

Quote:
Originally Posted by Doogiew View Post
Thanks I do want to find something out of a newer truck with overdrive, any ideas what transmission / transfer case combos would work. I don't mind getting the driveshaft modified. It would be nice to know what years of new chev trucks would fit and then buy a complete package from a donor truck.
This page will show you a lot of the options, pretty much 73-87 should yield a lot of options. Any solid axle truck is a start, learn what the tranny looks like.
http://www.chuckschevytruckpages.com/73-87specs.html

Here's an example near me... http://lancaster.craigslist.org/cto/5492792276.html

87 K-20 Suburban
Engine: 5.7L (350) fuel-injected V8
Transmission: 700R4 automatic with overdrive
Transfer case: NP208
Brand new 4" Rough Country lift kit with dual steering stabilizer and extended brake lines
Wheels: American Racing 16" (blacked out) with 285/75/16 BF Goodrich All-Terrain tires (good condition, will pass PA inspection, about half tread left)
New dual exhaust with Flowmaster mufflers, and Hooker full-length headers
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Reply

Bookmarks

Tags
1968, 700r4, k10, muncie, sm465


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:31 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com