New to me 67 C50

[mrolds88]

Originally Posted by Wilseya

I have the port and tube by the Distributor. The engine is so dirty I can not see the numbers, I have pressure washed it and used a bunch of degreaser with not much luck. I have replaced the dist. with an HEI unit I am waiting for plug wires and a coil. The peks of living 25 miles from town lol.

On your HEI, don't use the factory coil wire. Run a wire from the cap to 1 of these places. 1: the terminal on the back of the starter switch on the dash. 2: to a convenient power on when key is on power source. That way you get the full 12 volts. I think you will appreciate the HEI.