OR Letting all my good stuff go

[Pick8208]

Sold my 72 K10 Cheyenne Super. This is all the stuff I had saved up for it over the years. Time to let it all go.

Q-jet Carb in NOS packaging. Clearly really low miles by how clean it is. Came with my truck, but I never ran it. #17054929 on the side. SOLD.




1967-72 2-speed wiper motor. Unsure of condition. Had it as a spare. $20. Will ship


1967-72 bedside toolbox door. Some rust in lower corner and several broken mounting screws. Fixable. Comes with lock tumbler, spring clip, and part of latch assembly.SOLD




Hubcap wheel stainless 4x4 hubcaps for 15-inch wheels. Driver condition. Fronts have a few dings, rears are pretty clean. NOT cut. No splits. SOLD




4x4 Rally wheel caps and rings for 15-inch wheels. Really clean rings w/ no dents. Caps are weathered but not pitted. One mounting screw missing. SOLD.


4x4 Rally wheels. 15x8. True and straight, currently painted (mostly) orange. One has some rust around bead, but it never leaked. $80 Prefer local pickup (Portland, OR) because they're so heavy.



New to selling here, but I get that the first "I'll take it" is the deal. PayPal OK, but bear with me as I navigate it and shipping costs. Desired shipping methods and costs will be up to the buyer.

[chewychevy67]

Does the tool box come from a 71? Key?
I'm interested in the whole lot but I am looking for a tool box lock with an "A" keyway.

[72CSCC]

Oops - pass on the carb. I thought it was NOS.

Craig

[Pick8208]

Originally Posted by chewychevy67

Does the tool box come from a 71? Key?
I'm interested in the whole lot but I am looking for a tool box lock with an "A" keyway.

That's a good question. The truck was a ’72, but the cab was earlier. Not sure about the pickup bed or this toolbox door. I found another that was rust-free and used it.

The lock came from that replacement door. I don't have a key for it, and I'm unsure of the year. Can get more pics if you'd like.

Jim

[Pick8208]

Originally Posted by 72CSCC

Oops - pass on the carb. I thought it was NOS.

Craig

So did I! Came with the truck when I bought it originally. Other than being really clean and tight, I don't know much about it. Didn't want to crack it open until I needed it.

[chewychevy67]

Does the cylinder have a 4 digit code stamped into it on the side?

[Pick8208]

Originally Posted by chewychevy67

Does the cylinder have a 4 digit code stamped into it on the side?

Does not appear to have any numbers stamped on it.

[chewychevy67]

Ok do you have any extra keys laying around? In the pictures I posted you can see the letter A stamped into the key just below the key head. You have one with the letter A see if you can slide it into the keyway. It may not turn the lock which is ok as long as it slides all the way into it.

[Pick8208]

Originally Posted by chewychevy67

Ok do you have any extra keys laying around? In the pictures I posted you can see the letter A stamped into the key just below the key head. You have one with the letter A see if you can slide it into the keyway. It may not turn the lock which is ok as long as it slides all the way into it.

Got it. I don't have any A keys around here, but I might have some at work. I'll check to see and let you know.

[JimH2828]

I'll take the rally trim rings and caps as long as the rings are 2 1/2" wide with 16 clips on the back of each.

Thanks
Jim

[chewychevy67]

Ok well if the lock takes an "A" keyway I will take these parts.

[DeadheadNM]

Would you sell the rally trim rings separately? If so, how much shipped to 87107? Thanks, Pete

[Pick8208]

Originally Posted by chewychevy67

Ok do you have any extra keys laying around? In the pictures I posted you can see the letter A stamped into the key just below the key head. You have one with the letter A see if you can slide it into the keyway. It may not turn the lock which is ok as long as it slides all the way into it.

Could not find any A keys, but I did confirm that both C and D don't fit. I'll keep looking.

[Pick8208]

Originally Posted by JimH2828

I'll take the rally trim rings and caps as long as the rings are 2 1/2" wide with 16 clips on the back of each.

Thanks
Jim

Hey Jim, they're 3 inches wide and have a single-piece retainer ring. See pics:

[Pick8208]

Originally Posted by DeadheadNM

Would you sell the rally trim rings separately? If so, how much shipped to 87107? Thanks, Pete

Thanks, but I'd rather sell them as as set.

[cjmorr13]

If the rims fit 16" 8 lug steelies ill take those and the toolbox door as is.

[cjmorr13]

ok, didnt read that the hubs are for 15" wheels earlier, now i know. ill take the toolbox door if still available.

[JimH2828]

Originally Posted by Pick8208

Hey Jim, they're 3 inches wide and have a single-piece retainer ring. See pics:

I'm only looking for 2.5" so I'll pass on the rally trim rings and caps.

-Jim

[mikey2409]

How much do you want for the beauty ring set shipped to 90201 wished I still lives in Woodburn and not california I would have picked them up

[hioutput522]

I'd like to get in line for the hub caps, if still available.

thank you,
chad

[bowtie604]

I'll get in line for the tool box door if still available.

[Pick8208]

Originally Posted by chewychevy67

Ok well if the lock takes an "A" keyway I will take these parts.

Just a quick update -- I don't have any A keys, but I'm going to swing by a locksmith today to see if they've got some. chewychevy67 is first on the door until we know for sure what tumbler is with it.

[Pick8208]

Originally Posted by mikey2409

How much do you want for the beauty ring set shipped to 90201 wished I still lives in Woodburn and not california I would have picked them up

I'd really like to sell the set complete, so $100. Shipping via UPS appears to be about $30.

[Pick8208]

Originally Posted by hioutput522

I'd like to get in line for the hub caps, if still available.

thank you,
chad

Looks like you're first on the caps. PM me your info and I'll work out shipping.

[Pick8208]

Originally Posted by chewychevy67

Ok well if the lock takes an "A" keyway I will take these parts.

It's NOT an A key. Just verifying that you're no longer interested before I move on.