Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-08-2016, 08:01 PM | #11 |
Registered User
Join Date: Jan 2016
Location: West Olive, MI
Posts: 44
|
Re: 1951 GMC 3 window half ton
Hey guys, a little more progress.
I was having trouble getting the right kick panel to fit to the new rocker panel, tow board, and a pillar. I finally cut about 3" off the the kick panel. I was then able to bend and pound it into shape to fit. Then welded it in. It's not perty, but I feel this is an important area for structural integrity. My welds are piling up too high and causing me to spend too much time with a grinder. I'll turn the heat up and see if I can flatten it out, without burning thru. My welder is a Millermatic 250 and I'm using .035 wire. Maybe someone else is using this welder and has it dialed in. I'd appreciate some info for optimum adjustment. Here's a few more pic's. Thanks, Jeff |
Bookmarks |
|
|