can some body show me some pics

[WOLFMANmike]

hi guys im wanting to do my grounds on my truck .. and ive heard that you guys also ground all your lights .... i have a hard time understanding how to achieve this by just reading words .. can one of you show me some pics on how to ground my lights ? all lights that you think should be grounded thanks for any of your help .... Happy Truckin

[Mjminino]

Then from that spot on the grill to the frame or battery.

[Mjminino]

for the rear tail lights, i am going to run a wire from the housing to the frame

[franken]

Draw a mental picture of a line between the thing you want to ground and the - terminal on the battery. Then create an electrical connection between that picture on the the vehicle. The - terminal is usually connected to the fender nearby with a small wire. The big cable is to run the starter. From there, all the electrical connections to get to the load need to be good.
When a vehicle is new, there's no rust so things work fine. As time goes by things deteriorate.

[WOLFMANmike]

Originally Posted by Mjminino

Then from that spot on the grill to the frame or battery.

is that wire part of the stock light harness ? or did you add it ? and if added i can only see the wire going to the grill where is it on the light it self ? if i ad a ground to the tail lights housing which im assuming is where the bulb goes into ... will it still work for LED tail lights ? and do i also ground the parking lights the same as the tails ?