1967 GMC Suburban Build (Poloma) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1968k20** · 03-21-2016, 08:02 PM

Picked this up last week. Engine/trans were unbolted from the frame when I bought her. She's a 67 2wd with barn doors, original ivory white with red interior. So I thought to myself " Lets pull the engine out to freshen it up, since it's already unbolted!" I am glad I did! There's a 6" crack on the block! It was recently rebuilt(.030 over), so I will find a block and put her back together. I need to also pull trans out and ID and make sure fluid looks good. I am not going to do anything to the body yet, as I want to get it running. Poloma has hardly any rust. I have never seen one this clean ( maybe a show Suburban)!

**1968k20** · 03-21-2016, 08:03 PM

Here we go!

**1968k20** · 03-21-2016, 08:04 PM

More

**1968k20** · 03-21-2016, 08:05 PM

Crack in block

**1968k20** · 03-21-2016, 08:06 PM

Can't beat the 67 GMC grills!

**1968k20** · 03-22-2016, 11:45 PM

Pulled trans today(700r4). Pulled the pan, and water was the first to drip out! Should I rebuild or rebuild a 350 that I pulled out of my 72? Which trans is better behind a 350?

**LockDoc** · 03-26-2016, 09:51 PM

Quote:

Originally Posted by 1968k20

Pulled trans today(700r4). Pulled the pan, and water was the first to drip out! Should I rebuild or rebuild a 350 that I pulled out of my 72? Which trans is better behind a 350?

If the r4 was all hooked up and working and you are going to be putting some highway miles on it I would rebuild it....

Just my 2¢ worth....

LockDoc

**1968k20** · 03-26-2016, 10:46 PM

My round-trip commute to work is 2 miles! I don't go out of town much;maybe I would drive it once every 6 months a hundred miles or more!

**LockDoc** · 03-26-2016, 11:38 PM

Quote:

Originally Posted by 1968k20

My round-trip commute to work is 2 miles! I don't go out of town much;maybe I would drive it once every 6 months a hundred miles or more!

Then it probably wouldn't make a lot of difference.

LockDoc

bonestock72 · 07-19-2016, 09:42 AM

hey, this is bonestock 72 over here in sierraville, i've got a 350 4 bolt main casting #3970010 that needs rebuilt. It's standard bore. had a rod knock. you could transfer the parts out of your cracked block to this one. supposedly has a steel crank. let me know if you're interested.

**1968k20** · 07-19-2016, 08:18 PM

Quote:

Originally Posted by bonestock72

hey, this is bonestock 72 over here in sierraville, i've got a 350 4 bolt main casting #3970010 that needs rebuilt. It's standard bore. had a rod knock. you could transfer the parts out of your cracked block to this one. supposedly has a steel crank. let me know if you're interested.

How much do you want for it?

03-21-2016, 08:02 PM	#1
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	1967 GMC Suburban Build (Poloma) Picked this up last week. Engine/trans were unbolted from the frame when I bought her. She's a 67 2wd with barn doors, original ivory white with red interior. So I thought to myself " Lets pull the engine out to freshen it up, since it's already unbolted!" I am glad I did! There's a 6" crack on the block! It was recently rebuilt(.030 over), so I will find a block and put her back together. I need to also pull trans out and ID and make sure fluid looks good. I am not going to do anything to the body yet, as I want to get it running. Poloma has hardly any rust. I have never seen one this clean ( maybe a show Suburban)! Attached Images __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

03-21-2016, 08:03 PM	#2
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: 1967 GMC Suburban Build (Poloma) Here we go! Attached Images __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

03-21-2016, 08:05 PM	#4
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: 1967 GMC Suburban Build (Poloma) Crack in block Attached Images __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

03-21-2016, 08:06 PM	#5
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: 1967 GMC Suburban Build (Poloma) Can't beat the 67 GMC grills! Attached Images __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

03-22-2016, 11:45 PM	#6
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: 1967 GMC Suburban Build (Poloma) Pulled trans today(700r4). Pulled the pan, and water was the first to drip out! Should I rebuild or rebuild a 350 that I pulled out of my 72? Which trans is better behind a 350? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

03-21-2016, 08:04 PM	#3
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: 1967 GMC Suburban Build (Poloma) More Attached Images __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

03-26-2016, 10:46 PM	#8
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,629	Re: 1967 GMC Suburban Build (Poloma) My round-trip commute to work is 2 miles! I don't go out of town much;maybe I would drive it once every 6 months a hundred miles or more! __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

07-19-2016, 09:42 AM	#10
bonestock72 Registered User Join Date: Aug 2015 Location: sierraville ca Posts: 419	Re: 1967 GMC Suburban Build (Poloma) hey, this is bonestock 72 over here in sierraville, i've got a 350 4 bolt main casting #3970010 that needs rebuilt. It's standard bore. had a rod knock. you could transfer the parts out of your cracked block to this one. supposedly has a steel crank. let me know if you're interested.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.