The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-29-2016, 10:44 PM   #1
nateshrek
Registered User
 
Join Date: Aug 2014
Location: Ligonier, PA
Posts: 37
To box or not to box, that is the question.

Hey fellas,
Just wondering your thoughts on boxing a frame? I'm runnin a 1965 gmc 1500,totally stock in regards to the frame. I'm the one planning on putting a cummins in it. I've done a lot of reading on this and some say to box and some say not to. It causes more stress crack. Or some say just weld a strap along the top of the frame rail. Some say it all depends on what you're doing with it. So here's my plans for the truck.
Purely a pavement crusher. Maybe drive back a field to a field party but not muddin. No drag racing except between stoplights.
I'm sure there's other posts about this, but I'd like a fresh start on it and everyone knowing the specific application, for best advice.

Thanks guys!
nateshrek is offline   Reply With Quote
Old 08-30-2016, 11:37 AM   #2
chevy_mike
Never Ending Projects
 
chevy_mike's Avatar
 
Join Date: Jul 2006
Location: San Diego, CA
Posts: 3,836
Re: To box or not to box, that is the question.

With the weight of that engine (I had one in my '97 Ram) and the torque it puts out even stock, I would box the frame rails to at least mid way under the cab. I might also add a strap along the top of the frame rails too. My Ram frame was seriously beefy.
__________________
.
1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD
1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD
1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD


We were given two ears and one mouth for a reason... listen twice as much and speak half as often...
chevy_mike is offline   Reply With Quote
Old 08-30-2016, 12:18 PM   #3
Marv D
Registered Truck Offender
 
Marv D's Avatar
 
Join Date: May 2008
Location: hells training ground (aka Ariz)
Posts: 3,118
Re: To box or not to box, that is the question.

Was going to suggest the same. Box it to AT LEAST the trans cross member.
__________________
Still playin with trucks, even at my age!

When you're dead, it's only a problem for the people around you, because you don't know you're dead.
.....It's kinda the same when your STUPID.


I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.
Marv D is offline   Reply With Quote
Old 08-30-2016, 02:14 PM   #4
patrickk1
Registered User
 
Join Date: Apr 2009
Location: Billerica, Ma
Posts: 197
Re: To box or not to box, that is the question.

I'd box the front/rear and also add an xmember along the middle
__________________
- Patrick

1964 GMC pickup lwb ~ My newest build!
1937 Ford Coupe ~ Custom frame, LS1, quickchange
1950 Chevrolet 3100 ~ Bagged (Sold)
1931 Chrysler Roadster ~'32 Ford Frame, Channeled 8" (Originally a 60's show car)
1967 Chevelle ~ 454 Triple Black (Sold)
1964 Chevrolet Impala SS (Sold)
patrickk1 is offline   Reply With Quote
Old 08-30-2016, 02:19 PM   #5
canadian_diesel1964
Registered User
 
Join Date: Feb 2015
Location: Belmont Ontario Canada
Posts: 418
Re: To box or not to box, that is the question.

x 2 on the x member...thems be big motors...when unsure box more
canadian_diesel1964 is offline   Reply With Quote
Old 08-30-2016, 10:08 PM   #6
nateshrek
Registered User
 
Join Date: Aug 2014
Location: Ligonier, PA
Posts: 37
Re: To box or not to box, that is the question.

Hey guys thanks for the tips! But what about when you read people saying the frame should twist a little and by boxing you'll only create new stress points and it will start to crack elsewhere. I mean is a fully boxed frame better than a partially boxed frame? In regards to structure and not failing somewhere else? I mean I would have to guess ride quality will suffer but I'm not driving a 65 with a cummins in it to take a nap!!!
nateshrek is offline   Reply With Quote
Old 08-31-2016, 08:06 AM   #7
patrickk1
Registered User
 
Join Date: Apr 2009
Location: Billerica, Ma
Posts: 197
Re: To box or not to box, that is the question.

You'll see people in both camps of the box or no box. You'll also see that manufactures have changed how they have designed their frame over the years. Most frame use to be made with C channel, yet 67-77 bronco frames were fully boxed from the factory (essentially to C channels welded together). Most GM convertibles were also boxed. S10 frames were boxed from the front to the middle of the frame. Most new truck frames are fully boxed. I prefer to have a stiff frame and let the suspension do the work, whether that's offroad or on a corner carver. If you partially box a frame you should fishmouth the end of the boxed section like they do on the s10. Even the 60-62 xframes were boxed at both ends with a large x-member in the middle.
__________________
- Patrick

1964 GMC pickup lwb ~ My newest build!
1937 Ford Coupe ~ Custom frame, LS1, quickchange
1950 Chevrolet 3100 ~ Bagged (Sold)
1931 Chrysler Roadster ~'32 Ford Frame, Channeled 8" (Originally a 60's show car)
1967 Chevelle ~ 454 Triple Black (Sold)
1964 Chevrolet Impala SS (Sold)
patrickk1 is offline   Reply With Quote
Old 08-31-2016, 11:01 PM   #8
nateshrek
Registered User
 
Join Date: Aug 2014
Location: Ligonier, PA
Posts: 37
Re: To box or not to box, that is the question.

So if I box from tip to tail it should eliminate any stress cracks that could devolve on the frame? I'm not concerned with the ride quality. I'm young, I can handle it for now. Lol
nateshrek is offline   Reply With Quote
Reply

Bookmarks

Tags
boxing, cracking, frame, stress


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:23 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com