|
09-17-2016, 09:42 PM | #1 | |
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,256
|
Re: LT1 GenV swap
Quote:
Can't find anything linking a lt1 to a ls fead setup but it looks like it would or could clear a vacuum pump.
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress Last edited by 87chevy.com; 09-17-2016 at 10:05 PM. |
|
09-18-2016, 06:53 AM | #2 |
Registered User
Join Date: Jul 2015
Location: Bowling Green, KY
Posts: 264
|
Re: LT1 GenV swap
No, the vacuum pump was not retained as it won't physically fit in most LS swap applications. The pump is only used in truck applications to augment the vacuum signal when the engine is operating in cylinder deactivation mode, so if will not be needed by someone that is not interested in utilizing that function in their swap.
|
09-18-2016, 11:01 AM | #3 | |
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,256
|
Re: LT1 GenV swap
Quote:
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
Bookmarks |
|
|