Pics of bolts for rear seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chastain90 · 09-27-2016, 12:58 PM

I need to know where to put the holes for my rear seat. My holes are covered up but I do have the small bars that run under the bed. Could anyone post pics of the bottom of the bed so I could make sure? Or if you have measurements that would be good too. Thanks

**1rippen6** · 09-27-2016, 02:41 PM

Maybe too small to read if so I can look and see if I still have the picture or maybe Richard saved it I sent it to him in an email also.

http://67-72chevytrucks.com/vboard/s...hlight=richard

**1rippen6** · 09-27-2016, 02:41 PM

Sorry it wasn't Richard it was Blazerowner

gringoloco · 09-27-2016, 08:58 PM

Conveniently, my Blazer is torn apart--never mind all the dust. First two measurements are taken from the rear of the bed.

gringoloco · 09-27-2016, 09:00 PM

Then across from wheelwell, driver to passenger:

**Blazerowner** · 09-28-2016, 11:21 AM

Hopefully you can read the measurements.

chastain90 · 09-30-2016, 12:09 PM

Thanks guys. Under my bed I have these 2 rails that run across on each side of the wheel well. Is this what the bolts go into?
Gringoloco, Do you have a pic showing all of the holes?

chastain90 · 09-30-2016, 12:15 PM

upon farther reading it looks like there is a mounting rail that goes under the bed. I will have to look again and see if I have this. I know I don't have the squares on top of the bed but I can make those. I guess I could make the mounting rail also out of a piece of flat stock if I need to.

**1rippen6** · 09-30-2016, 01:51 PM

I think I have a rail 60 plus shipping but the thing is heavy. I can get pictures if interested.

09-27-2016, 12:58 PM	#1
chastain90 Registered User Join Date: Jul 2009 Location: Chatsworth Ga Posts: 400	Pics of bolts for rear seat I need to know where to put the holes for my rear seat. My holes are covered up but I do have the small bars that run under the bed. Could anyone post pics of the bottom of the bed so I could make sure? Or if you have measurements that would be good too. Thanks __________________ Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=706924

09-27-2016, 02:41 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,725	Re: Pics of bolts for rear seat Maybe too small to read if so I can look and see if I still have the picture or maybe Richard saved it I sent it to him in an email also. http://67-72chevytrucks.com/vboard/s...hlight=richard

09-27-2016, 02:41 PM	#3
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,725	Re: Pics of bolts for rear seat Sorry it wasn't Richard it was Blazerowner

09-27-2016, 08:58 PM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Pics of bolts for rear seat Conveniently, my Blazer is torn apart--never mind all the dust. First two measurements are taken from the rear of the bed. Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-27-2016, 09:00 PM	#5
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Pics of bolts for rear seat Then across from wheelwell, driver to passenger: Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-28-2016, 11:21 AM	#6
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,940	Re: Pics of bolts for rear seat Hopefully you can read the measurements. Attached Images __________________ Kirk 72 Blazer CST 4wd highlander 66 Nova

09-30-2016, 12:09 PM	#7
chastain90 Registered User Join Date: Jul 2009 Location: Chatsworth Ga Posts: 400	Re: Pics of bolts for rear seat Thanks guys. Under my bed I have these 2 rails that run across on each side of the wheel well. Is this what the bolts go into? Gringoloco, Do you have a pic showing all of the holes? __________________ Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=706924

09-30-2016, 12:15 PM	#8
chastain90 Registered User Join Date: Jul 2009 Location: Chatsworth Ga Posts: 400	Re: Pics of bolts for rear seat upon farther reading it looks like there is a mounting rail that goes under the bed. I will have to look again and see if I have this. I know I don't have the squares on top of the bed but I can make those. I guess I could make the mounting rail also out of a piece of flat stock if I need to. __________________ Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=706924

09-30-2016, 01:51 PM	#9
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,725	Re: Pics of bolts for rear seat I think I have a rail 60 plus shipping but the thing is heavy. I can get pictures if interested.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.