Drilling extra holes in frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

IdahoMan · 10-17-2016, 10:40 PM

Hello,

Any dangers, rules, or pointers I should keep in mind when drilling holes into any part of the frame? I don't want to weaken it or harm the structual intergrity in any way. I don't like the idea of drilling into it at all, but I need to place some clamps in in order to run some cable.

Now under the cab area above the spining shaft I made some "L" shaped sheetmetal pieces and used 3M attachment tape to attach them. I drilled into the pieces and not the cab, but I need to run heavy cabling along the inside of the left frame rail.

Thank you.

Sincerely,
IM

geezer#99 · 10-18-2016, 12:05 AM

Drill away!
You won't hurt anything.
Back in the early sixties there were Pontiac's with a multitude of holes in the frame. Purposefully done to shave off weight for racing.
They called them 'Swiss Cheese' Pontiac's!!
Check out this frame.
http://www.onallcylinders.com/2015/0...eese-catalina/

Matt Man · 10-18-2016, 02:24 AM

I wouldn't drill any holes near where these frames crack such as steering box and shock mounts.

andrewmp6 · 10-18-2016, 02:53 AM

Depends the size hole and where your gonna put it.

Nick_R_23 · 10-18-2016, 03:59 AM

Quote:

Originally Posted by andrewmp6

Depends the size hole and where your gonna put it.

Heard that from a few ladies before

*nekkidhillbilly* · 10-18-2016, 09:14 PM

Quote:

Originally Posted by Nick_R_23

Heard that from a few ladies before

dreams are not real mind you

10-17-2016, 10:40 PM	#1
IdahoMan Registered User Join Date: Oct 2014 Location: IDaho Posts: 89	Drilling extra holes in frame Hello, Any dangers, rules, or pointers I should keep in mind when drilling holes into any part of the frame? I don't want to weaken it or harm the structual intergrity in any way. I don't like the idea of drilling into it at all, but I need to place some clamps in in order to run some cable. Now under the cab area above the spining shaft I made some "L" shaped sheetmetal pieces and used 3M attachment tape to attach them. I drilled into the pieces and not the cab, but I need to run heavy cabling along the inside of the left frame rail. Thank you. Sincerely, IM

10-18-2016, 12:05 AM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,707	Re: Drilling extra holes in frame Drill away! You won't hurt anything. Back in the early sixties there were Pontiac's with a multitude of holes in the frame. Purposefully done to shave off weight for racing. They called them 'Swiss Cheese' Pontiac's!! Check out this frame. http://www.onallcylinders.com/2015/0...eese-catalina/

10-18-2016, 02:24 AM	#3
Matt Man Registered User Join Date: Oct 2009 Location: Buhl, Idaho Posts: 1,438	Re: Drilling extra holes in frame I wouldn't drill any holes near where these frames crack such as steering box and shock mounts. __________________ 86 c30 crew cab dually 454/400 4/6 drop SOLD 1-8-11 1981 chevy K10 short Bed Scottsdale SOLD 10-26-2020 67 GMC Stepside Straight six/3 on the tree "The Peach" 2020 Silverado Double Cab LT Z71 5.3 8 speed Daily Driver K10 build http://67-72chevytrucks.com/vboard/s...d.php?t=671934 The Peach build http://67-72chevytrucks.com/vboard/s...d.php?t=733903

10-18-2016, 02:53 AM	#4
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Drilling extra holes in frame Depends the size hole and where your gonna put it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.