CA Porterbuilt Prep Sale - Stock Frame & Suspension Parts

[ck5566]

Originally Posted by ck5566

Do you have any Rear Brackets 67-72 2wd with Coils on all 4's

Forgot yes PM me your details/address. thanks

[A-P]

Originally Posted by ck5566

Forgot yes PM me your details/address. thanks

PM sent.

[A-P]

Originally Posted by jr1000yarder

I'd go 150 on the trailing arms shipped FedEx, that's pretty close to your asking price. Assuming rot free and straight of course

Here are some better pics of the trailing arms - last one shows the dings on the bottoms. The local guy didn't show up for them, so they're yours for $150 if you want them. Let me know, and I'll try to find a way to get them boxed up.

[A-P]

Wheels, trailing arm crossmember, and center link are now sold. Here's what I still have:
- Upper and lower control arm set - $100
- Engine crossmember - $50
- Pair of trailing arms - $80 (if jr1000yarder passes)
- TH400 trans crossmember - $40
- Drum brake parts setup from a 71 - $50
- Pair of 5 lug axles for 71/up rear end - $60

[ck5566]

I hate to be the bearer of bad news but the Center Link that you sold me is not for a 68 like I ask for it to be "Positively" for a 68. Just to let anybody else that sees this thread that it Hopefully will be returned and it will again be for sale here. I am PM'ing the OP'ter "A-P". I hope for the OP some one is in need of a 1971-1972 C10 Center Link

[ck5566]

Originally Posted by ck5566

I hate to be the bearer of bad news but the Center Link that you sold me is not for a 68 like I ask for it to be "Positively" for a 68. Just to let anybody else that sees this thread that it Hopefully will be returned and it will again be for sale here. I am PM'ing the OP'ter "A-P". I hope for the OP some one is in need of a 1971-1972 C10 Center Link

I will Apologize to Any and All in the way I posted my concerns for the wrong part sold to me was in any way Offensive or to the way I worded it that didn't come across in a proper way. I wasn't Blasting the OP at all it was simply to let others know the part was wrong and most likely for sale again some day.

[ck5566]

Free Bump TTT

[zicc1835]

Originally Posted by A-P

Finally finished the rivet removal marathon in prep for my dropmembers, so it's time to clear out some garage space. Frame parts are from a 68 short fleet, and rear end parts are from a 71. Here's what I've got that's still in good shape:

- Upper and lower control arm set - $100
- Engine crossmember - $50
- Trailing arm crossmember - $50
- Pair of trailing arms - $80
- TH400 trans crossmember - $40
- CST swaybar - $50
- Drum brake parts setup from a 71 - $50
- Pair of 5 lug axles for 71/up rear end - $60

I've also got a set of 15x8 and 15x10 staggered ralleys with new tires for $800

It's probably not worth it to ship the larger stuff, but I'm happy to work with anybody that needs these parts. Let me know if you'd like more detailed pics of anything.

can you share your rivet removal method i have a few to go and want to see if you found a better way

[A-P]

Originally Posted by zicc1835

can you share your rivet removal method i have a few to go and want to see if you found a better way

I tried every way I read about, and for me the best/easiest way was drilling. The air chisel worked ok, but it the noise was pretty rough. I kept two different corded drills going - I'd start with a small punch to make a center hole, then move to the smaller bit, then the larger bit, then take off the edges with the cold chisel. This stuff also helped a ton: CRC TrueTap Foaming Cutting Aerosol - it made the drill bits last about 5 times longer. One last tip that was a huge "duh" moment for me - I realized this way later than I should have - do all the top rivets, then FLIP THE FRAME OVER to do the ones on the bottom. Duh. So much better than working on the ground!!

[A-P]

Originally Posted by A-P

Wheels, trailing arm crossmember, and center link are now sold. Here's what I still have:
- Upper and lower control arm set - $100
- Engine crossmember - $50
- Pair of trailing arms - $80 (if jr1000yarder passes)
- TH400 trans crossmember - $40
- Drum brake parts setup from a 71 - $50
- Pair of 5 lug axles for 71/up rear end - $60

I'm ready to be done with this stuff, and I hate to see it scrapped, so here are new prices on what's left:
- Pair of trailing arms - FREE (pick up only, no shipping)
- Shock mount crossmember - FREE (pick up only, no shipping)
- Panhard bar crossmember - FREE (pick up only, no shipping)
- Pair of 5 lug axles for 71/up rear end - FREE (pick up only, no shipping)
- Drum brake parts setup from a 71 rear - FREE picked up, or I've already got it in a large flat rate box, so $20 shipped.

[hoover]

do you still have the upper and lower control arms ?if you do please let me know as soon as you can thanks.

[A-P]

Originally Posted by hoover

do you still have the upper and lower control arms ?if you do please let me know as soon as you can thanks.

Sorry, I don't - control arm have already gone to another board member.

[ajgriffin]

Hey did you ever get rid of those trailing arms?