Horn Part Info needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1978sierra · 03-15-2017, 05:27 PM

My horn used to work, then one day it stopped. I noted that when I changed the ignition lock cylinder and was putting the wheel back on I depressed the plunger on the canceling cam with the screwdriver and got a pretty big spark... I think that was when it stopped working.

Anyway, I wanted to get it working again so started to tear down the column, when I got to the turn signal switch I found a chard and small bit of copper where the plunger and spring are supposed to be, I yanked it out with some pliers.

Now I am trying to find the part # for that plunger and spring but am coming up short. Can anyone help.

Here are some pictures:

TexasJeff · 03-16-2017, 07:24 AM

I believe they used to sell that part in the Help section of the auto parts stores.

http://www.oreillyauto.com/site/c/de...1&keyword=horn

Pontiac1976 · 03-18-2017, 08:28 PM

http://www.ebay.com/itm/Turn-Signal-...FYqnmh&vxp=mtr this the part your looking for, order in non tilt. & tilt set up. LMC has them too / Classic Parts 73-87 / As said Dorman help scction

03-15-2017, 05:27 PM	#1
1978sierra Registered User Join Date: Nov 2015 Location: Vancouver Bc Posts: 30	Horn Part Info needed My horn used to work, then one day it stopped. I noted that when I changed the ignition lock cylinder and was putting the wheel back on I depressed the plunger on the canceling cam with the screwdriver and got a pretty big spark... I think that was when it stopped working. Anyway, I wanted to get it working again so started to tear down the column, when I got to the turn signal switch I found a chard and small bit of copper where the plunger and spring are supposed to be, I yanked it out with some pliers. Now I am trying to find the part # for that plunger and spring but am coming up short. Can anyone help. Here are some pictures: Attached Images

03-16-2017, 07:24 AM	#2
TexasJeff Don't Crush em Restore em Join Date: Aug 2004 Location: Pinehurst, Texas Posts: 764	Re: Horn Part Info needed I believe they used to sell that part in the Help section of the auto parts stores. http://www.oreillyauto.com/site/c/de...1&keyword=horn __________________ TexasJeff 2009 Silver with Linen Interior Cadillac DTS 1990 Red with White Top and Interior Ford Mustang GT convertible 1998 Red with Gray Interior, C3500 Chevy Crew Cab Dually

03-18-2017, 08:28 PM	#3
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 764	Re: Horn Part Info needed http://www.ebay.com/itm/Turn-Signal-...FYqnmh&vxp=mtr this the part your looking for, order in non tilt. & tilt set up. LMC has them too / Classic Parts 73-87 / As said Dorman help scction __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change. Last edited by Pontiac1976; 03-18-2017 at 08:46 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.