Not another fuel injection question

[Bigdav160]

No, I used this one. I am not sure what the difference is other than it's baffled and accepts the fuel injection sending unit.

I did, for ease of connection, relocate the fill neck to the corner. I could have gotten away with heating up the solder and just spinning the filler neck around. Some people just mount the tank backwards. The taper is barely noticeable.

I used stock strap kit (cheap on RockAuto) to mount the tank to two cross members.

One cross member I removed and moved back to the rear. Right arrow



and I purchased another off the parts board and mounted it in front of the tank.

The pic is not my truck but used for demonstration purposes.