Throttle Cable Knob - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1project2many · 06-09-2017, 04:49 AM

This is the knob and cable:

It feeds into the dash. The nut is removed unscrewing then by sliding it down the cable. The cable is then passed through the dash and the nut is slid back up the cable housing from the engine end. There is a shoulder that stops the cable from passing all the way through the dash. If the hole in the dash is too large then someone has made a modification. You will need to find another solution.

BTW, that cable picture comes from this site:
https://raybuck.com/product/1955-59-...FdeIswodw2UHbA

06-09-2017, 04:49 AM	#11
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,188	Re: Throttle Cable Knob This is the knob and cable: It feeds into the dash. The nut is removed unscrewing then by sliding it down the cable. The cable is then passed through the dash and the nut is slid back up the cable housing from the engine end. There is a shoulder that stops the cable from passing all the way through the dash. If the hole in the dash is too large then someone has made a modification. You will need to find another solution. BTW, that cable picture comes from this site: https://raybuck.com/product/1955-59-...FdeIswodw2UHbA



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.