![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#76 |
Registered User
Join Date: Apr 2012
Location: CT
Posts: 265
|
Re: Project "Full Circle" 66 C10
New/used bedside
![]() BIG RED ![]() ![]() 489ci BBC- all forged, 781 oval port heads with oversized valves. He regrets this now and wishes he spent a little extra on some aluminum ones. Trans is a built powerglide and the transfercase is a reversed drop box. The truck should be a handful ![]() ![]() ![]() ![]()
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad |
![]() |
![]() |
![]() |
#77 |
Registered User
Join Date: Apr 2012
Location: CT
Posts: 265
|
Re: Project "Full Circle" 66 C10
After screwing around for too long I'm finally back working on my truck. I welded a small patch on the driver side floor and got the passenger inner rocker tacked in. The rear part of the rocker was too short like the driver side so I pie cut it and filled it in first.
![]() ![]() ![]() ![]()
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad |
![]() |
![]() |
![]() |
#78 |
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: Project "Full Circle" 66 C10
Glad to see you're back at it. Nice work on smoothing out the welds.
|
![]() |
![]() |
![]() |
#79 |
Registered User
Join Date: Apr 2012
Location: CT
Posts: 265
|
Re: Project "Full Circle" 66 C10
More-
![]() ![]() ![]() These fat "cut off wheels" are awesome for grinding welds! ![]() Scored a new bench. I'm going to cover it with 3/16" steel ![]() Driver side cab corner- Need to fill in the bottom gap a bit ![]() Passenger side floor vent ![]()
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad Last edited by timmytimm3; 05-18-2017 at 09:25 AM. |
![]() |
![]() |
![]() |
#80 |
Active Member
![]() Join Date: Aug 2012
Location: East Hartford, CT
Posts: 159
|
Re: Project "Full Circle" 66 C10
Awesome! You guys do nice work!
|
![]() |
![]() |
![]() |
#81 |
Registered User
Join Date: Apr 2012
Location: CT
Posts: 265
|
Re: Project "Full Circle" 66 C10
More updates. Hung the passenger side door and the bottom was hitting the rocker. These aftermarket panels always seem to need adjusting...
![]() ![]() I also cut about 1/4" out of the inner door bottom and pie cut the corners to help with clearance. ![]() ![]()
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad |
![]() |
![]() |
![]() |
#82 |
Registered User
Join Date: Apr 2012
Location: CT
Posts: 265
|
Re: Project "Full Circle" 66 C10
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad |
![]() |
![]() |
![]() |
#83 |
Registered User
Join Date: Apr 2012
Location: CT
Posts: 265
|
Re: Project "Full Circle" 66 C10
Continuing on the rust repairs. The A pillar had some rust hidden behind it so I drilled it out but was unable to remove it without bending the crap out of it. I decided to pull the dash out to be able to fix everything right the first time.
![]() ![]() ![]() ![]()
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad |
![]() |
![]() |
![]() |
#84 |
Registered User
Join Date: Jul 2009
Location: San Jose Ca
Posts: 2,871
|
Re: Project "Full Circle" 66 C10
Damn. That is a lot of work. Cabs around here are so much nicer. Good work sir.
__________________
David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy |
![]() |
![]() |
![]() |
Bookmarks |
|
|