door hinges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

camtoys1 · 07-24-2017, 03:12 PM

hi how are the 67-72 after market door hinge are they any good as in fit and lining up the door

74baggedbug · 07-24-2017, 03:34 PM

I need some also or someone who rebuilds them

rockyrivermark · 07-24-2017, 03:43 PM

Clean up the hinges and replace the bushings and pins and hinges should be good. Better than repop too
Heat up the hinge sleeve and pound pin out with hammer and drift pin
Shouldn't take more than an hour or two.
Search YouTube. Saw vid there also.
Mark

dfosh · 07-24-2017, 04:19 PM

Get on you tube and look up Gibson 63 . He has a good video on doing this on his 63 Chevy.

camtoys1 · 07-24-2017, 04:29 PM

i think the left ones on my truck are bent so just will try to find some old ones and redo them

Rufas · 07-24-2017, 06:33 PM

I got a hinges for both doors from LMC. My 70 GMC is being painted and the body shop had no complaints with the new hinges. Everything was removed from the truck, so they had to rehang and align the doors anyway.

Mr Handy · 07-24-2017, 09:11 PM

Quote:

Originally Posted by dfosh

Get on you tube and look up Gibson 63 . He has a good video on doing this on his 63 Chevy.

The Gibson 63 videos are impressive, I would say he has been around the bock on a few restorations, I stumbled onto his videos a while back doing research on painting. if you have time to kill he is definitely worth a look.

sprint_9 · 07-24-2017, 09:57 PM

Bushings - GM # 9721917

Pins - GM # 20046147

Dorman also has a kit, Dorman # 703-264

The pins are too long and will need to be cut to length.

07-24-2017, 03:12 PM	#1
camtoys1 Registered User Join Date: Jul 2009 Location: huntington beach ca Posts: 341	door hinges hi how are the 67-72 after market door hinge are they any good as in fit and lining up the door

07-24-2017, 03:34 PM	#2
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 701	Re: door hinges I need some also or someone who rebuilds them

07-24-2017, 03:43 PM	#3
rockyrivermark Registered User Join Date: Apr 2011 Location: Fairview Park, Ohio Posts: 1,031	Re: door hinges Clean up the hinges and replace the bushings and pins and hinges should be good. Better than repop too Heat up the hinge sleeve and pound pin out with hammer and drift pin Shouldn't take more than an hour or two. Search YouTube. Saw vid there also. Mark __________________ My build page http://67-72chevytrucks.com/vboard/s...d.php?t=764662 My cabinet building site http://www.cbcabinets.com

07-24-2017, 04:19 PM	#4
dfosh Registered User Join Date: Oct 2007 Location: greeneville tn Posts: 237	Re: door hinges Get on you tube and look up Gibson 63 . He has a good video on doing this on his 63 Chevy.

07-24-2017, 04:29 PM	#5
camtoys1 Registered User Join Date: Jul 2009 Location: huntington beach ca Posts: 341	Re: door hinges i think the left ones on my truck are bent so just will try to find some old ones and redo them

07-24-2017, 06:33 PM	#6
Rufas Registered User Join Date: May 2016 Location: Fort Mohave, AZ Posts: 368	Re: door hinges I got a hinges for both doors from LMC. My 70 GMC is being painted and the body shop had no complaints with the new hinges. Everything was removed from the truck, so they had to rehang and align the doors anyway. __________________ 1970 GMC 2500 700R Trans, RideTech 4 link rear suspension, air bagged on all four corners, factory upper/lower A-Arms, 2 inch drop spindles. 350 SBC 300hp Weiand Supercharger FiTech 30004 EFI

07-24-2017, 09:57 PM	#8
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: door hinges Bushings - GM # 9721917 Pins - GM # 20046147 Dorman also has a kit, Dorman # 703-264 The pins are too long and will need to be cut to length.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.