Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-10-2017, 02:45 PM | #12 |
Moderator
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,180
|
Re: Polyurethane Trailing Arm Bushings?
Hey In The Ten Ring
Do yourself a big favor and grab two second hand trailing arms and replace the bushes on the second hand ones...use the rubber bushes in the front of the arms. Also, about a week before you go to remove the current ones, give all the bolts a really big dose of penetrating spray...then grab the biggest breaker bar you have and be prepared for a really tight pair of bolts thru the bushes..... Finally, while you have the rear end work going on, replace the bushes in the track arm...these can be the poly style bushes... Have fun !!! |
Bookmarks |
|
|