'88-'98: What Size Tire and Wheel are You Running? - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

likaroc13 · 01-30-2014, 02:04 AM

15x7 steelies with 225/70's up front & 235/60's in rear:

likaroc13 · 01-30-2014, 02:07 AM

18x8's with 235/55's:

ksbrktracer · 02-05-2014, 12:37 PM

Quote:

Originally Posted by Rusbuilt

Do you have any rubbing issues up front?

Havent had any Issues at all. I did a little playing around last night. 22X9.5 with a 265/35/22 on the rear, fits perfect other than I would have to roll the lip a little bit. Could probably use a little more sidewall tho .... Maybe a 285/35/22 .... Gonna try one when I get some in stock . No way it will work on the front lowered this much.

fluffyfreak · 02-06-2014, 05:37 AM

[URL=http://s36.photobucket.com/user/bigjaydaddy505/media/Burban/PICT0134.jpg.html]

my 93 burb bagged on 22s with 265/35/22s debating on goin way bigger right now since its torn apart

devind · 03-17-2014, 10:09 PM

Basic set up:
Front end:
Lowered about 4” with 2” drop spindles and drop springs
Cut fender flange lip off flush with inner fender well, spot welded inner & outer back together and ground smooth. Pulled inner fender well bolt directly above tire out.

Rear end:
Lowered about 6’ with axle flip kit and c-notch plates.
Added some air-assist air bags so he could have some adjustability on rear ride height and adjust for carrying a load or pulling a trailer. Had to do some e-brake relocating and rerouting to clear air bags and keep from rubbing the inside of the wheel and tires.
Rolled rear fender flange with vise grips and shot filled rubber mallet. Then with a hydraulic-jack a 2x4 slightly widened the outer fender paying very close attention to the sheet metal as to not distort anything. Gained about 3/8”

Wheels and Tires:
Front:
Showheels Streeters 18” x 8” with 0 offset mounted with Falken Ziex ZE-612 (235/60R-18)
Rear:
Showheels Streeters 18” x 9” with a +6 offset mounted with Falken Ziex ZE-612 (265/60R-18)

More:
http://67-72chevytrucks.com/vboard/s...d.php?t=621197

likaroc13 · 03-17-2014, 10:14 PM

Quote:

Originally Posted by devind

Basic set up:
Front end:
Lowered about 4” with 2” drop spindles and drop springs
Cut fender flange lip off flush with inner fender well, spot welded inner & outer back together and ground smooth. Pulled inner fender well bolt directly above tire out.

Rear end:
Lowered about 6’ with axle flip kit and c-notch plates.
Added some air-assist air bags so he could have some adjustability on rear ride height and adjust for carrying a load or pulling a trailer. Had to do some e-brake relocating and rerouting to clear air bags and keep from rubbing the inside of the wheel and tires.
Rolled rear fender flange with vise grips and shot filled rubber mallet. Then with a hydraulic-jack a 2x4 slightly widened the outer fender paying very close attention to the sheet metal as to not distort anything. Gained about 3/8”

Wheels and Tires:
Front:
Showheels Streeters 18” x 8” with 0 offset mounted with Falken Ziex ZE-612 (235/60R-18)
Rear:
Showheels Streeters 18” x 9” with a +6 offset mounted with Falken Ziex ZE-612 (265/60R-18)

Nice looking truck!

devind · 03-17-2014, 10:41 PM

Quote:

Originally Posted by likaroc13

Nice looking truck!

Thanks,
It has been a fun little build with my son. He needed something dependable he could drive back and forth from collage. Plus he races mountain and road bikes so he built some little bike rakes to haul his bikes around in the back when he goes to races.

I have always felt if and when you can give your cars and trucks a little personalty if you can. I hope some of this thinking rubs off on him.

jchev01 · 06-10-2014, 04:14 PM

245/50/20 on front and 285/50/20 on rear. 3" drop in front and 4" in rear.
Love your truck, devind!

Name: 95 GMC 100.jpg
Views: 12437
Size: 27.5 KB

Name: 95 GMC 101.jpg
Views: 12315
Size: 23.0 KB

Name: 95 GMC 197.jpg
Views: 12803
Size: 60.0 KB

Name: gm trucks 088.jpg
Views: 12281
Size: 46.3 KB

Name: gm trucks 090.jpg
Views: 12287
Size: 49.6 KB

jchev01 · 06-10-2014, 04:22 PM

Oh, and I DO love showing mine off

Name: 95 GMC 060.jpg
Views: 12433
Size: 45.0 KB

Name: 95 GMC 072.jpg
Views: 12353
Size: 37.6 KB

Name: 95 GMC 073.jpg
Views: 12230
Size: 49.7 KB

Name: 95 GMC 078.jpg
Views: 12187
Size: 31.0 KB

likaroc13 · 06-10-2014, 10:37 PM

Quote:

Originally Posted by jchev01

245/50/20 on front and 285/50/20 on rear. 3" drop in front and 4" in rear.
Oh, and I DO love showing mine off

That looks nice! Nothing wrong with showing it off either.

Jerbou71 · 06-11-2014, 06:54 AM

Im running 22"x9" and 255r30 22 tires. With quit a bit drop. Lol.

jchev01 · 06-11-2014, 08:59 AM

[QUOTE=Jerbou71;6715589]Im running 22"x9" and 255r30 22 tires. With quit a bit drop. Lol.

Yeah, as in ANTS have to crawl OVER your truck

jchev01 · 06-11-2014, 09:03 AM

Quote:

Originally Posted by devind

Thanks,
It has been a fun little build with my son. He needed something dependable he could drive back and forth from collage. Plus he races mountain and road bikes so he built some little bike rakes to haul his bikes around in the back when he goes to races.

I have always felt if and when you can give your cars and trucks a little personalty if you can. I hope some of this thinking rubs off on him.

That's cool. I did the same with my sons, now they leave nothing stock.

altereddezignz · 08-11-2014, 09:03 PM

Quote:

Originally Posted by 1badgmc

'91 GMC:
Front: 19x8 with 245/45-19s
Rear: 20x10 with 285/30-20s

'98 Suburban:
15x7 Sport wheels with 235/75-15s

Whats the backspace on the blue truck?

1badgmc · 08-12-2014, 08:01 AM

Quote:

Originally Posted by altereddezignz

Whats the backspace on the blue truck?

5" front. 6" rear.

altereddezignz · 08-14-2014, 06:20 PM

Quote:

Originally Posted by 1badgmc

5" front. 6" rear.

Thanks. Trying to figure out how wide of a tire i can run on a 15x10 or 15x12 on a 98 chevy 2wd rear and a 6 or 7 inch wide on the front and the offsets.

91ChevyZ71 · 08-15-2014, 07:51 AM

First I have to say there are many great looking trucks in this post.

On my 91 K1500 I purchased Cooper Discoverer AT3 LT265/75R16 Load Range E a little over a year ago. The truck rides and handles good for LR-E tires. Traction in winter is great. Tires are wearing well. I run the OEM aluminum wheels - 16X7.

http://us.coopertire.com/Tires/Light...ERER-A-T3.aspx

lucky_7 · 09-08-2017, 11:44 AM

275/60/15 Cooper Cobra Radial G/T on 8" Rallys.

**special-K** · 09-21-2017, 11:00 PM

My '95 Suburban has 7" Accuride steel wheels. First I was running 255/85-16s. It needed tires this summer and the 255s were hard to find a deal on so I went to 285/75s. Looks like I have no pictures yet with the 285/75s

01-30-2014, 02:04 AM	#76
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: '88-'98: What Size Tire and Wheel are You Running? 15x7 steelies with 225/70's up front & 235/60's in rear: Attached Images __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

01-30-2014, 02:07 AM	#77
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: '88-'98: What Size Tire and Wheel are You Running? 18x8's with 235/55's: Attached Images __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

02-06-2014, 05:37 AM	#79
fluffyfreak Registered User Join Date: Jun 2013 Location: albuquerque nm Posts: 204	Re: '88-'98: What Size Tire and Wheel are You Running? [URL=http://s36.photobucket.com/user/bigjaydaddy505/media/Burban/PICT0134.jpg.html] my 93 burb bagged on 22s with 265/35/22s debating on goin way bigger right now since its torn apart

03-17-2014, 10:09 PM	#80
devind Registered User Join Date: Feb 2014 Location: Wichita Falls, Tx Posts: 18	Re: '88-'98: What Size Tire and Wheel are You Running? Basic set up: Front end: Lowered about 4” with 2” drop spindles and drop springs Cut fender flange lip off flush with inner fender well, spot welded inner & outer back together and ground smooth. Pulled inner fender well bolt directly above tire out. Rear end: Lowered about 6’ with axle flip kit and c-notch plates. Added some air-assist air bags so he could have some adjustability on rear ride height and adjust for carrying a load or pulling a trailer. Had to do some e-brake relocating and rerouting to clear air bags and keep from rubbing the inside of the wheel and tires. Rolled rear fender flange with vise grips and shot filled rubber mallet. Then with a hydraulic-jack a 2x4 slightly widened the outer fender paying very close attention to the sheet metal as to not distort anything. Gained about 3/8” Wheels and Tires: Front: Showheels Streeters 18” x 8” with 0 offset mounted with Falken Ziex ZE-612 (235/60R-18) Rear: Showheels Streeters 18” x 9” with a +6 offset mounted with Falken Ziex ZE-612 (265/60R-18) More: http://67-72chevytrucks.com/vboard/s...d.php?t=621197 Last edited by devind; 03-17-2014 at 10:35 PM.

06-10-2014, 04:14 PM	#83
jchev01 Registered User Join Date: Mar 2012 Location: NPR, FL Posts: 9	Re: '88-'98: What Size Tire and Wheel are You Running? 245/50/20 on front and 285/50/20 on rear. 3" drop in front and 4" in rear. Love your truck, devind!

06-10-2014, 04:22 PM	#84
jchev01 Registered User Join Date: Mar 2012 Location: NPR, FL Posts: 9	Re: '88-'98: What Size Tire and Wheel are You Running? Oh, and I DO love showing mine off

06-11-2014, 06:54 AM	#86
Jerbou71 Registered User Join Date: Jun 2012 Location: Atlanta ga Posts: 30	Re: '88-'98: What Size Tire and Wheel are You Running? Im running 22"x9" and 255r30 22 tires. With quit a bit drop. Lol. __________________ 94grounddweller My build thread. http://www.gmt400.com/forum/showthre...ild-on-22-quot

06-11-2014, 08:59 AM	#87
jchev01 Registered User Join Date: Mar 2012 Location: NPR, FL Posts: 9	Re: '88-'98: What Size Tire and Wheel are You Running? [QUOTE=Jerbou71;6715589]Im running 22"x9" and 255r30 22 tires. With quit a bit drop. Lol. Yeah, as in ANTS have to crawl OVER your truck

08-15-2014, 07:51 AM	#92
91ChevyZ71 Registered User Join Date: Jul 2014 Location: Ohio Posts: 6	Re: '88-'98: What Size Tire and Wheel are You Running? First I have to say there are many great looking trucks in this post. On my 91 K1500 I purchased Cooper Discoverer AT3 LT265/75R16 Load Range E a little over a year ago. The truck rides and handles good for LR-E tires. Traction in winter is great. Tires are wearing well. I run the OEM aluminum wheels - 16X7. http://us.coopertire.com/Tires/Light...ERER-A-T3.aspx Attached Images __________________ Sam 2014 GMC Sierra SLE K1500 Z71 Fire Red Regular Cab Long Bed - 5.3L (325 Cu In) V8 - 6L80-E 6-Speed Auto 1991 Chevrolet K1500 Z71 Silver Regular Cab - Long Bed 5.7L (350 Cu In) V8 - 4L60 4-Speed Auto

09-08-2017, 11:44 AM	#93
lucky_7 Registered User Join Date: Mar 2013 Location: Muskogee, Ok. Posts: 123	Re: '88-'98: What Size Tire and Wheel are You Running? 275/60/15 Cooper Cobra Radial G/T on 8" Rallys. Attached Images

09-21-2017, 11:00 PM	#94
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: '88-'98: What Size Tire and Wheel are You Running? My '95 Suburban has 7" Accuride steel wheels. First I was running 255/85-16s. It needed tires this summer and the 255s were hard to find a deal on so I went to 285/75s. Looks like I have no pictures yet with the 285/75s Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.