The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-12-2017, 06:02 PM   #1
71ChevySS(straight6)
Registered User
 
Join Date: Mar 2013
Location: McPherson, KS
Posts: 96
250 is constantly giving me fits... considering something different

I'm getting so fed up with this 250. Now it's acting like its got sticking valves or possibly collapsed lifters. Idles fine, revs great in neutral for whatever reason, but put a load on it and it goes to sputtering and hesitating. Can anyone point me in the right direction here? I poured seafoam into the carb while it was running and put a dash in the crankcase, so we'll see what happens...

In the meantime, I've been considering swapping something else in more and more - at least until I can afford to properly go through and build up the 250 some day in the future.

Was thinking big block... but don't have a big block budget. Max $300.

Then I remembered those undesirable 366 and 427 tall deck engines.

Would any of you happen to be within 150 miles of me (McPherson, KS) with an old grain truck sitting on your back 40 that you don't use, but she'll start with some gas and a fresh battery?

If it's still in a truck I can pull it.

The bellhousings on those are a little different, though, aren't they? I'd have to take the truck 4 or 5-speed with it...

Thanks in advance.
__________________
'71 Custom-10 2wd longbed, 250 inline-6, NP 435 four-speed. Medium Bronze Iridescent. Farm truck deluxe.

Rat rod build: 1949 Crosley Station Wagon body on 1993 Dodge D350 chassis, Cadillac 500 powerplant.
71ChevySS(straight6) is offline   Reply With Quote
Old 10-12-2017, 06:21 PM   #2
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,701
Re: 250 is constantly giving me fits... considering something different

Is your motor warmed up completely when you test it?
Is your heat riser working?
What distributor?
What's your initial timing?
geezer#99 is offline   Reply With Quote
Old 10-12-2017, 08:34 PM   #3
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,662
Re: 250 is constantly giving me fits... considering something different

$300 budget isn't gonna get you very far...
mongocanfly is offline   Reply With Quote
Old 10-12-2017, 08:42 PM   #4
TJ's Chevy
Registered User
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: 250 is constantly giving me fits... considering something different

Have you gone through the fuel System? I'm talking from Gas cap to carb. Lines, filter, and pump.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline   Reply With Quote
Old 10-12-2017, 08:46 PM   #5
'68OrangeSunshine
Senior Member
 
'68OrangeSunshine's Avatar
 
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,419
Re: 250 is constantly giving me fits... considering something different

A 292 L6 will be an easy swap into a ''CS...'' VIN truck. You will need the 292-only passenger-side motor mount. Otherwise very much the same but nearly 2 inches taller.
Dependable engine. Torque like a big block.
__________________


Every 25 years I like to rebuild that 292, whether it needs it or not.
'68OrangeSunshine is offline   Reply With Quote
Old 10-13-2017, 09:28 AM   #6
cadillac_al
Registered User
 
Join Date: Oct 2013
Location: Maine
Posts: 2,368
Re: 250 is constantly giving me fits... considering something different

I had a 1976 250 a couple years ago giving me fits. It would start and run fine in neutral but could not take any load. I took the Monjet apart several times and tried to figure out the power jet system and finally had to admit defeat. I bought a NOS Holly Economaster for it and it has never run better. Maybe if you could find a Monojet expert he could set you up. Mine had HEI, if you have points then your problems are doubled.

I see 68GMSEE is a Monojet expert. Maybe you can PM him and have him rebuild one for you.
__________________
76 Chevy K20
76 GMC K15
77 Chevy C10
77 Chevy K10
cadillac_al is offline   Reply With Quote
Old 10-13-2017, 09:47 AM   #7
Alex V.
Registered User
 
Alex V.'s Avatar
 
Join Date: Mar 2013
Location: Campbellsville, KY
Posts: 888
Re: 250 is constantly giving me fits... considering something different

The tall-deck big blocks bolt in where any other BBC does... but your symptoms don't sound like your engine is done - sounds like fuel or ignition. Those systems on these engines are far from impossible to master. Methodical troubleshooting and doing what needs done will get you farther than frustration and shotgunning parts.
__________________
Alex V.
------
1967 C10 Suburban, 350/NP435, Green/Green, PS, PB, HD cooling, charging, shocks, and springs.

1985 GMC C3500 SRW, Sierra Classic, 454/TH400, white/blue.
Alex V. is offline   Reply With Quote
Old 10-16-2017, 12:11 AM   #8
71ChevySS(straight6)
Registered User
 
Join Date: Mar 2013
Location: McPherson, KS
Posts: 96
Re: 250 is constantly giving me fits... considering something different

Quote:
Originally Posted by cadillac_al View Post
I had a 1976 250 a couple years ago giving me fits. It would start and run fine in neutral but could not take any load. I took the Monjet apart several times and tried to figure out the power jet system and finally had to admit defeat. I bought a NOS Holly Economaster for it and it has never run better. Maybe if you could find a Monojet expert he could set you up. Mine had HEI, if you have points then your problems are doubled.

I see 68GMSEE is a Monojet expert. Maybe you can PM him and have him rebuild one for you.
I was thinking carb issues as well, possibly, but I've rebuilt that thing four times. Turns out it was the points. Somehow the gap had closed - thinking it may be the road I live on, it's rougher than **** and has knocked the truck out of time before - so I regapped them and it runs like a top now. I went ahead and ordered a cheap eBay HEI distributor, so I'll swap that in when it gets here. hopefully no more issues after that's taken care of.
__________________
'71 Custom-10 2wd longbed, 250 inline-6, NP 435 four-speed. Medium Bronze Iridescent. Farm truck deluxe.

Rat rod build: 1949 Crosley Station Wagon body on 1993 Dodge D350 chassis, Cadillac 500 powerplant.
71ChevySS(straight6) is offline   Reply With Quote
Old 10-16-2017, 12:14 AM   #9
71ChevySS(straight6)
Registered User
 
Join Date: Mar 2013
Location: McPherson, KS
Posts: 96
Re: 250 is constantly giving me fits... considering something different

Quote:
Originally Posted by '68OrangeSunshine View Post
A 292 L6 will be an easy swap into a ''CS...'' VIN truck. You will need the 292-only passenger-side motor mount. Otherwise very much the same but nearly 2 inches taller.
Dependable engine. Torque like a big block.
I've heard a lot of good things about 292s. But I can never find any, and have yet to even see one in person
__________________
'71 Custom-10 2wd longbed, 250 inline-6, NP 435 four-speed. Medium Bronze Iridescent. Farm truck deluxe.

Rat rod build: 1949 Crosley Station Wagon body on 1993 Dodge D350 chassis, Cadillac 500 powerplant.
71ChevySS(straight6) is offline   Reply With Quote
Old 10-16-2017, 01:20 AM   #10
'68OrangeSunshine
Senior Member
 
'68OrangeSunshine's Avatar
 
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,419
Re: 250 is constantly giving me fits... considering something different

Quote:
Originally Posted by 71ChevySS(straight6) View Post
I've heard a lot of good things about 292s. But I can never find any, and have yet to even see one in person
Well I was lucky, I bought a truck in 1973, and it had a factory 292. Still have it. Ran it to work today.
I have one runner, rebuilt in 2005 and 2 more cores. One was a kick-out from somebody else's ''barnfind'' and the other I bought in a junkyard in Yuma in 1977, and rebuilt, and ran for 25 years. Many years ago a parts guy at my local Chevy dealers told me that the '' 292 was Chevy's best-kept secret''.
You gotta keep looking, but 50 years after the fact, they are admittedly getting rare.
UPS vans, dump trucks, school buses, K/20s, C/30s seemed to be powered with 292s.
__________________


Every 25 years I like to rebuild that 292, whether it needs it or not.
'68OrangeSunshine is offline   Reply With Quote
Old 10-29-2017, 01:04 PM   #11
paintman
Registered User
 
Join Date: Dec 2010
Location: washington NJ
Posts: 766
Re: 250 is constantly giving me fits... considering something different

there still around just not in your area...............

https://harrisburg.craigslist.org/pt...337220374.html

https://york.craigslist.org/pts/d/gm...337174514.html
paintman is offline   Reply With Quote
Reply

Bookmarks

Tags
bbc, tall deck


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:41 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com