The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-24-2017, 05:36 PM   #26
Deerelindel
Registered User
 
Join Date: Dec 2014
Location: Flat Rock Michigan
Posts: 76
Re: Lets see your tow mirrors. '69 K20 needs your ideas.

Quote:
Originally Posted by SS Tim View Post
While I know this a real problem for you the flyswatters are not a solution. Looked for half an hour through my pictures and can't find more than bracket pictures. Finding a good usable set will be very difficult plus they are not that usable in that they vibrate badly.

Understand about the rust issue but for moderate to limited towing I think the camper four points are the best choice. Most car trailers here go 96" wide and they push 102" (its fun walking around Willow Springs Raceway pits).
For a full timer I'd jump up to the DG5 West Coast or a current bubble back aftermarket style that is similar with heated heads even.
Do you have the mounting location for the flyswatters? What book did this diagram come from?
__________________


1968 GMC 1 ton 4*4 with Detroit Diesel 6v53t 9ft stepside

1978 Chevrolet C50 350sb 8ft fleetside
Deerelindel is offline   Reply With Quote
Old 12-24-2017, 08:33 PM   #27
SS Tim
Registered User
 
SS Tim's Avatar
 
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
Re: Lets see your tow mirrors. '69 K20 needs your ideas.

Quote:
Originally Posted by Deerelindel View Post
Do you have the mounting location for the flyswatters? What book did this diagram come from?
The design location MAY be in the factory asembly manual.
I'd have to look harder to find it.

The diagram is from a parts manual.

Here are more pictures showing the factory installation.

Have you located a set of usable or better flyswatters to install?
Attached Images
   

Last edited by SS Tim; 12-24-2017 at 08:48 PM.
SS Tim is offline   Reply With Quote
Old 12-24-2017, 10:56 PM   #28
Barnfind46
Registered User
 
Barnfind46's Avatar
 
Join Date: Aug 2014
Location: Mena,Arkansas
Posts: 485
Re: Lets see your tow mirrors. '69 K20 needs your ideas.

I found these mirrors at a wrecking yard on a square body. they were universal and adjustable. They work fairly well.
Attached Images
 
__________________
68' with no bells or whistles unless I add'em.
Barnfind46 is offline   Reply With Quote
Old 12-25-2017, 09:15 AM   #29
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
Talking Re: Lets see your tow mirrors. '69 K20 needs your ideas.

My mirrors on the ramp truck.
Attached Images
     
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 12-25-2017, 12:19 PM   #30
suburban99
Registered User
 
suburban99's Avatar
 
Join Date: May 2014
Location: Mission BC
Posts: 452
Re: Lets see your tow mirrors. '69 K20 needs your ideas.

I made these out of 3 different mirrors for my 72 K10 to fit the existing holes in the doors. They are ok around town but shake pretty good on the freeway. Most people that I drive by are looking at the truck so they don't care if I cut them off...
Attached Images
  
__________________
1962 C10 Longbox LS 5.3 4L60E----Sold$$
2014 Ram 4x4 3500 Laramie Diesel..Momma's truck
2015 Ram 4x4 1500
1997 Boxster.
1972 K10 Custom Deluxe LS 6.0
1950 GMC 3100 S10 & LS swapped
suburban99 is offline   Reply With Quote
Old 12-26-2017, 06:07 PM   #31
Deerelindel
Registered User
 
Join Date: Dec 2014
Location: Flat Rock Michigan
Posts: 76
Re: Lets see your tow mirrors. '69 K20 needs your ideas.

Quote:
Originally Posted by SS Tim View Post
The design location MAY be in the factory asembly manual.
I'd have to look harder to find it.

The diagram is from a parts manual.

Here are more pictures showing the factory installation.

Have you located a set of usable or better flyswatters to install?
I have the mounts for the door but need the arm and the mirror its self.
__________________


1968 GMC 1 ton 4*4 with Detroit Diesel 6v53t 9ft stepside

1978 Chevrolet C50 350sb 8ft fleetside
Deerelindel is offline   Reply With Quote
Old 12-27-2017, 10:28 PM   #32
SS Tim
Registered User
 
SS Tim's Avatar
 
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
Re: Lets see your tow mirrors. '69 K20 needs your ideas.

A little period inspiration
Attached Images
 
SS Tim is offline   Reply With Quote
Reply

Bookmarks

Tags
mirrors, towing


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com