SC 71-72 factory front disk setup for grabs, coil springs and leaf springs.

[PaPaStewySnipes]

I upgraded my front brakes and have no use for the left over parts. Doing a 4/6 drop on my leaf truck as well so rear stock leafs are up for grabs as well. Every part worked fine a month ago before upgrading my suspension and brakes. I will be adding disk to the rear and will not need drum parts also. Spindles look very nice after you remove the caked dirt that coated them. I spayed some purple power on the side and was amazed. Good for someone looking to add disk brakes or in need of a spindle. Rotors are not dammaged, they have a line down center from the factory. Parts have about 76k on them of my '72 gmc c15.

**SOLD**71-72 stock spindle

1.25" thick original factory12" rotors with cooling groove. Races installed no bearings, I reused.

**SOLD**Calipers with hardware, pads, and rubber line.
**SOLD**Original cast Prop for front disk and rear drum.

Master that was used with booster. Dont have booster I exchanged it.

Factory height front coil springs

3+1 rear factory leafs, factory shackle, u bolts.

Rear drum and componets.

Make me some offers if interested. Control arms are not for sell I refinshed my old sets like new.

I have Pay Pal. Located 29212, will charge correct and fair shipping if not picked up.

[PaPaStewySnipes]

Here is some more pics and what I upgraded to.

[PaPaStewySnipes]

Line in center of rotor is factory, they are still good and can be turned. They came with a Groove in middle of rotor for cooling 71-72.

[bhahn70]

What are you asking for them.

[PaPaStewySnipes]

I'm asking for fair offers, make me some offers. Not looking to break someones bank or make money shipping. I'm selling spindles, calipers and prop for $150 today, they paid shipping, greyhound APX seemed to be cheapest. Doing a walmart to Walmart money transfer, it was easy so I will take that too if I have to ship.

[PaPaStewySnipes]

So front spindles, calipers and the prop is gone, shipped out to New Mexico today. I still have master, coil springs, original rotors, rear leaf springs, shackle, and u bolts. Rear drum setup. I can have the rotors turned before shipment if needed. My buddy here in town has another set of the spindles if someone really needs them.

[tbroich]

Are the leaf springs stock factory height?

What are you asking for them?

Can they be shipped?

[71deluxe]

Interested in the rotors. What would you need to get out of them if you were to have them turned? Price shipped to 98230. Thx.