66 GMC Long to Short LS Swap

[Duncan K]

Got back to work on the truck this weekend. Separated the trans from the motor and got the motor on the stand.Labelled and removed the wiring harness
[IMG]
Decided to leave the rust repair alone for a bit and work on the frame. Started by removing all the old exhaust hangers. Cut off the brackets for the bump stops to make room for a notch.

Next up it was time to make this thing a SWB. Removed the rear cab mounts and the first bed mount. Marked out the 12" section to be removed with a radius in the corners. Made the cuts with a cut off wheel and a plasma cutter. Fit up wasn't as good as I'd like on the passenger side. Man I wish I had more clamps for this job!!

Welded it up and ground them smooth. I'll have to pick up some heavy flat bar and add some reinforcing plates on the inside.
[
Clipped 8" off the back and relocated the rear cab mounts
]