CA 73-91 K5 Blazer Jimmy rear sill scuff plates NEW - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**yote1234** · 06-06-2018, 12:48 PM

received this quality product! I thank you !

Irish1941 · 06-06-2018, 04:18 PM

TTT
Sold out for now. Many thanks to all those who got one.
I may do 2nd run in next few weeks.
I do have a few with minor scratches. Most could be sanded and polished out.
If you need something not 100% show truck, send me a PM.
$80 shipped in lower 48.

ZLB · 08-14-2018, 11:32 PM

Do you still have some of these? Did you do a second run? If not, I would still be interested in one with minor scratches.

I tried to send you a private message, but it wouldn't let me and gave me this response, "Irish1941 has exceeded their stored private messages quota and cannot accept further messages until they clear some space."

Stonebare · 12-23-2018, 11:35 AM

Do you have any scratched scuff plates left?

Irish1941 · 12-26-2018, 11:12 AM

All sold out.
Posted via Mobile Device

CISCOS65 · 01-03-2019, 05:25 AM

Quote:

Originally Posted by Irish1941

All sold out.
Posted via Mobile Device

I'll take one when they become available PayPal ready!

**KevsClassics** · 07-24-2019, 08:43 PM

I would like to get one if you make some more.

Hayward carter · 02-19-2022, 06:39 AM

Quote:

Originally Posted by Irish1941

TTT
Sold out for now. Many thanks to all those who got one.
I may do 2nd run in next few weeks.
I do have a few with minor scratches. Most could be sanded and polished out.
If you need something not 100% show truck, send me a PM.
$80 shipped in lower 48.

Posted via Mobile Device

Hayward carter · 02-19-2022, 06:43 AM

Quote:

Originally Posted by Hayward carter

Posted via Mobile Device

Hello just checking to see if you have any rear sill scuff plates available for a K5 Blazer ??

Thanks
Posted via Mobile Device

Hayward carter · 02-20-2022, 09:12 AM

Quote:

Originally Posted by Hayward carter

Posted via Mobile Device

If you have any with scratches on it I’ll buy one of those as well.

Thanks
Posted via Mobile Device

HYK · 09-21-2018, 12:23 PM

I would like one. How do I place an order?

Irish1941 · 09-24-2018, 11:38 PM

So sorry for my slow replies. Our small family got alittle smaller over past few months. Hospice and all that stuff.
Wasn't really thinking on truck stuff.
Anyway, I have 15 plates left.
Minor scratch here or there. Screw holes are little bigger than GM #6 head but #8 work just fine which they will come with. They are correct chrome oval head #8 but only a die hard would know the difference.
I have enough packing material for 7 at the moment.
$80 shipped quote still stands.

Anyway...
I'm pretty sure will be doing another run of these but it'll be month at least before I get it sorted it out. Trying new way to do it and eliminate the screw up factor. Metal costs have gone up too but price won't change as of this writing.

Irish1941 · 09-26-2018, 02:43 PM

Had some questions about the degree of scratches so thought I'd post few pix so you can see what 99% of the scratches look like.
Most times the vinyl did its job.
This one looks like it might be bad.

Peel off the vinyl and looks to be scratched.

But rub it with some acetone and it was just vinyl glue.

Some are truly scratched though albeit small.
Heres is one. Did penny for scale.

peeled back vinyl.

Wet sanded 1500 thru 2500 then quick hand polish with Mothers and its pretty much gone.
Feel free to PM any questions.

Down to 2 plates. First come first serve.
If you want one reply to the thread.

Crcrft78 · 10-07-2018, 10:09 AM

Any word on another run of these and if you'll be doing the front plate also?

Crcrft78 · 10-14-2018, 03:10 AM

Have you thought about doing the trim plates that go on the fulltops where they bolt back onto the body?

Irish1941 · 08-02-2019, 05:53 PM

Quick update:
Had A LOT of production/packaging problems.
Nearly got it sorted out. They need to be to my
standard before I offer them up.
I should have these ready shortly gentlemen.

**KevsClassics** · 08-02-2019, 08:45 PM

Quote:

Originally Posted by Irish1941

Quick update:
Had A LOT of production/packaging problems.
Nearly got it sorted out. They need to be to my
standard before I offer them up.
I should have these ready shortly gentlemen.

Thanks for update.

Maggro · 08-24-2019, 08:25 PM

Any estimate on when these will be available.

copywritten · 08-27-2019, 09:03 PM

I agree! Will you have any more of these?

Irish1941 · 08-30-2019, 01:05 PM

Thanks for interest and patients!
I'm close to have another bunch done. I will also have the 73-77 rear floor front scuff plate that screws down behind the front seats.
Working on few other things...stay tuned.

**buffydores** · 09-03-2019, 10:20 PM

Irish: Your PM folder is full. It won't let me reply.

weever82 · 10-02-2019, 04:54 PM

Also curious when they are going to be done. I could use one on my 84 Blazer.

Thanks for your time!

Weev-

engineer_gregh · 10-02-2019, 05:29 PM

Interested in one of each as well.

Chief Brody · 10-17-2019, 10:07 PM

I would be interested in one as as well...the cheap chinese one I bought wasn't long enough to reach the carpet, so it doesn't hold it down good.

Irish1941 · 10-28-2019, 06:48 PM

OK fellas
I got first test batch done. Minor tweaks and I'll be good to go.
I'll also have the '73-'77 front plate for the rear floor ready by then as well
It'll be made from stainless like the original.
As soon as I figure out photo hosting, I'll post pix up
Thanks!

06-06-2018, 12:48 PM	#1
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,445	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW received this quality product! I thank you ! __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

06-06-2018, 04:18 PM	#2
Irish1941 Registered User Join Date: Nov 2012 Location: Los Angeles, CA Posts: 450	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW-sold out! TTT Sold out for now. Many thanks to all those who got one. I may do 2nd run in next few weeks. I do have a few with minor scratches. Most could be sanded and polished out. If you need something not 100% show truck, send me a PM. $80 shipped in lower 48.

08-14-2018, 11:32 PM	#3
ZLB Registered User Join Date: Aug 2018 Location: Woodbury, Tennessee Posts: 2	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW Do you still have some of these? Did you do a second run? If not, I would still be interested in one with minor scratches. I tried to send you a private message, but it wouldn't let me and gave me this response, "Irish1941 has exceeded their stored private messages quota and cannot accept further messages until they clear some space."

12-23-2018, 11:35 AM	#4
Stonebare Registered User Join Date: Oct 2018 Location: Sulphur, LA Posts: 1	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW-sold out! Do you have any scratched scuff plates left?

07-24-2019, 08:43 PM	#7
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW I would like to get one if you make some more. __________________ Instagram kevs_classics64 64 Impala SS Conv 72 Blazer 2wd 75 Jimmy 2wd 63 Belair wagon 02 Silverado ext cab. DD RIP EL JAY

12-26-2018, 11:12 AM	#5
Irish1941 Registered User Join Date: Nov 2012 Location: Los Angeles, CA Posts: 450	All sold out. Posted via Mobile Device

09-21-2018, 12:23 PM	#11
HYK Registered User Join Date: Sep 2018 Location: Arizona Posts: 1	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW I would like one. How do I place an order?

09-24-2018, 11:38 PM	#12
Irish1941 Registered User Join Date: Nov 2012 Location: Los Angeles, CA Posts: 450	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW So sorry for my slow replies. Our small family got alittle smaller over past few months. Hospice and all that stuff. Wasn't really thinking on truck stuff. Anyway, I have 15 plates left. Minor scratch here or there. Screw holes are little bigger than GM #6 head but #8 work just fine which they will come with. They are correct chrome oval head #8 but only a die hard would know the difference. I have enough packing material for 7 at the moment. $80 shipped quote still stands. Anyway... I'm pretty sure will be doing another run of these but it'll be month at least before I get it sorted it out. Trying new way to do it and eliminate the screw up factor. Metal costs have gone up too but price won't change as of this writing. Last edited by Irish1941; 09-25-2018 at 09:39 AM.

09-26-2018, 02:43 PM	#13
Irish1941 Registered User Join Date: Nov 2012 Location: Los Angeles, CA Posts: 450	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW Had some questions about the degree of scratches so thought I'd post few pix so you can see what 99% of the scratches look like. Most times the vinyl did its job. This one looks like it might be bad. Peel off the vinyl and looks to be scratched. But rub it with some acetone and it was just vinyl glue. Some are truly scratched though albeit small. Heres is one. Did penny for scale. peeled back vinyl. Wet sanded 1500 thru 2500 then quick hand polish with Mothers and its pretty much gone. Feel free to PM any questions. Down to 2 plates. First come first serve. If you want one reply to the thread. Last edited by Irish1941; 09-29-2018 at 11:34 PM.

10-07-2018, 10:09 AM	#14
Crcrft78 Registered User Join Date: Nov 2014 Location: San Francisco CA Posts: 158	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW Any word on another run of these and if you'll be doing the front plate also? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=672047 http://67-72chevytrucks.com/vboard/s...d.php?t=688543

10-14-2018, 03:10 AM	#15
Crcrft78 Registered User Join Date: Nov 2014 Location: San Francisco CA Posts: 158	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW Have you thought about doing the trim plates that go on the fulltops where they bolt back onto the body? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=672047 http://67-72chevytrucks.com/vboard/s...d.php?t=688543

08-02-2019, 05:53 PM	#16
Irish1941 Registered User Join Date: Nov 2012 Location: Los Angeles, CA Posts: 450	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW Quick update: Had A LOT of production/packaging problems. Nearly got it sorted out. They need to be to my standard before I offer them up. I should have these ready shortly gentlemen.

08-24-2019, 08:25 PM	#18
Maggro Registered User Join Date: Nov 2014 Location: Buckeye, Az Posts: 122	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW Any estimate on when these will be available.

08-27-2019, 09:03 PM	#19
copywritten CopyWritten Join Date: Dec 2007 Location: Cypress TX Posts: 173	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW I agree! Will you have any more of these?

08-30-2019, 01:05 PM	#20
Irish1941 Registered User Join Date: Nov 2012 Location: Los Angeles, CA Posts: 450	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW Thanks for interest and patients! I'm close to have another bunch done. I will also have the 73-77 rear floor front scuff plate that screws down behind the front seats. Working on few other things...stay tuned.



Register or Log In To remove these advertisements.

09-03-2019, 10:20 PM	#21
buffydores Senior Member Join Date: Mar 2016 Location: Longview, TX Posts: 758	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW Irish: Your PM folder is full. It won't let me reply.

10-02-2019, 04:54 PM	#22
weever82 Registered User Join Date: Sep 2012 Location: Queen Creek, AZ Posts: 552	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW Also curious when they are going to be done. I could use one on my 84 Blazer. Thanks for your time! Weev- __________________ Weev- Life's tough...... It's even tougher when your stupid - John Wayne

10-02-2019, 05:29 PM	#23
engineer_gregh Registered User Join Date: Feb 2012 Location: Smyrna TN Posts: 1,153	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW Interested in one of each as well. __________________ 1971 Longbed BB Cheyenne Super 1972 Longbed SB Cheyenne Super 1972 Longbed Highlander Custom Deluxe 1975 K5 4x4 full convertible Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=645165 Greg Smyrna TN

10-17-2019, 10:07 PM	#24
Chief Brody Registered User Join Date: Sep 2010 Location: Alabama Posts: 14	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW I would be interested in one as as well...the cheap chinese one I bought wasn't long enough to reach the carpet, so it doesn't hold it down good.

10-28-2019, 06:48 PM	#25
Irish1941 Registered User Join Date: Nov 2012 Location: Los Angeles, CA Posts: 450	Re: 73-91 K5 Blazer Jimmy rear sill scuff plates NEW OK fellas I got first test batch done. Minor tweaks and I'll be good to go. I'll also have the '73-'77 front plate for the rear floor ready by then as well It'll be made from stainless like the original. As soon as I figure out photo hosting, I'll post pix up Thanks!

Register or Log In To remove these advertisements.