NJ parting 70 blazer 6cyl 3ott

[bigrigpardo]

Do not ask about the sliders here they are in a separate post.

heres a good rusty crusty being parted. 70 4wd 250 and 3 speed with dana transfer case and that u pattern shifter. ask about smalls but this thing is pretty roachy.

all big stuff is local pickup since shipping is killer but if you cant live without it let me know and we may be able to arrange shipping.


seats front and back they are all going to need new brackets or repair to them as the carpet held moisture but the seat frames and springs themselves are rust free. can take better pics once rain stops in a few days 450 local pickup

door latch reinforcement plates 70 shipped

hatch no glass and has a crack on the bottom but can be repaired 150 local pick up

spare tire carrier what you see is what I have for it. 250 local pickup

[rayray767]

I’d like to have the top inner bracket for the tire swing ...

[bigrigpardo]

Going to try and keep it together right now. Will let you know if I piece it out.

[72ironmike]

Rear bumper brackets - splash shields - license plate holder ?

[Tuff Gong]

Hatch access panel cover, rear seat arm rests.

[Early Rider Steve]

Is the tire rack a factory one? Would You be willing to take it to the UPS store as they will box and ship it. Thank You, Steve

[Tuff Gong]

Is the center speaker there? Plastic door screws next to vent window?

[bigrigpardo]

Originally Posted by 72ironmike

Rear bumper brackets - splash shields - license plate holder ?

will check for them tommorow

Originally Posted by Brian Atkinson

Hatch access panel cover, rear seat arm rests.

no access cover and not splitting armrests from seat

Originally Posted by Early Rider Steve

Is the tire rack a factory one? Would You be willing to take it to the UPS store as they will box and ship it. Thank You, Steve

the tire carrier is not factory it is aftermarket. and I can pack and ship but it will be a lot to az.

Originally Posted by Brian Atkinson

Is the center speaker there? Plastic door screws next to vent window?

will check for speaker I don't think its there and yes I think the plastic ferruls are there I don't think the screws were correct.

[Early Rider Steve]

How much to 86426, Fort Mohave, Arizona?

[bigrigpardo]

could be as much as 200 but would have to remove box and get an actual quote but would guess 150 minimum ups.

[rockc]

I would be interested in rear seat brackets.
also the rear bumper brackets too.

[bigrigpardo]

Originally Posted by rockc

I would be interested in rear seat brackets.
also the rear bumper brackets too.

bumper brackets you are second in line for rear seat brackets are no good due to moisture in the carpet.

[rockc]

How about the rear hatch?

[bigrigpardo]

Originally Posted by rockc

How about the rear hatch?

has a break through on the bottom I will check it over better and get better pics of it tomorrow.

[jondancer]

Rear seat arm rests pending condition ?

[jondancer]

Slider hatch windows !

[bigrigpardo]

Originally Posted by jondancer

Rear seat arm rests pending condition ?

not splitting from seat.

[a1vintage69]

I will take the visors and screws pending price and condition.

[jaybatta]

How are the 4wd lockouts? Rear bumper step, the white bar over the license plate thing? If it's an np205 I'd be interested in the 4wd shift lever and bolt. All shipped to Livingston, MT 59047

Thanks

Joe

[bigrigpardo]

Originally Posted by a1vintage69

I will take the visors and screws pending price and condition.

don't think they are fantastic but should be usable ill check tomorrow.

Originally Posted by jaybatta

How are the 4wd lockouts? Rear bumper step, the white bar over the license plate thing? If it's an np205 I'd be interested in the 4wd shift lever and bolt. All shipped to Livingston, MT 59047

Thanks

Joe

joe lockouts work and are usable wont call them mine dials are a little faded and rings have some dings but turned nice and smooth. the rear bumper step ill take a better pic of it tomorrow. 100 for hubs and 25 for step if you take the hubs plus shipping. transfer case is not a 205

[jaybatta]

Originally Posted by bigrigpardo

don't think they are fantastic but should be usable ill check tomorrow.



joe lockouts work and are usable wont call them mine dials are a little faded and rings have some dings but turned nice and smooth. the rear bumper step ill take a better pic of it tomorrow. 100 for hubs and 25 for step if you take the hubs plus shipping. transfer case is not a 205

Ok, I'll pass on the hubs, interested in the step pending closer pictures. Dang too bad on the t case.

Thanks

Joe

[Early Rider Steve]

Originally Posted by bigrigpardo

could be as much as 200 but would have to remove box and get an actual quote but would guess 150 minimum ups.

OK, I will have to find one closer to home. Thank You

[Tuff Gong]

Does it have leveling mats?

[lks dcvn]

How is the sandalwood dash pad - I'll take it if in decent shape pending pix and price shipped.

[402GMC]

What kind of shape are the seatbelts in I would be Intrested in the complete set