Outer Body Mount

[63suburban]

Originally Posted by notsolo

I will try and get a better photo, the shot with the white cardboard shows the bottom edge. That edge is open on rt side and left side, tips away from the 90 degree like it might have been to shed water... I know the undercoating obscures any decent photo. Also looks like about 1/2" up from rocker lip, maybe even, with rocker. I will check.

Thanks.

[notsolo]

Meanwhile!....my panel is a 62..cardboard template is 11" x 14"....11" is up under the plywood floor on mine, yours is lower I think with the bump up in the back, maybe 3"...rocker is even with the bottom, lip hangs down 1/2"...

[notsolo]

Probably not the photo you needed. 1" grid.