Fuel Sending Unit Swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 05-11-2004, 03:23 PM

Can someone give me a step by step of how to change out a fuel sending unit in a 1968 1/2 ton. Tank is behind the seat.

Thanks

walker · 05-11-2004, 09:20 PM

You don't say why you want to change it out. You may want to trouble shoot the system first, as bad grounds have a way of rearing thier ugly heads in guages. Check your grounds and do a continuity test on the fuel pump wiring first, then, as best I recall, knock the ring around the sending unit CCW until it is free. Then lift the sending unit and float out of the tank. Sunk floats are replaceable/repairable. Good luck, oh, and NO

while doing this.

05-11-2004, 03:23 PM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,342	Fuel Sending Unit Swap Can someone give me a step by step of how to change out a fuel sending unit in a 1968 1/2 ton. Tank is behind the seat. Thanks

05-11-2004, 09:20 PM	#2
walker Registered User Join Date: Jul 2003 Location: north of Phx AZ about 30 miles Posts: 698	You don't say why you want to change it out. You may want to trouble shoot the system first, as bad grounds have a way of rearing thier ugly heads in guages. Check your grounds and do a continuity test on the fuel pump wiring first, then, as best I recall, knock the ring around the sending unit CCW until it is free. Then lift the sending unit and float out of the tank. Sunk floats are replaceable/repairable. Good luck, oh, and NO while doing this. __________________ Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.