What did you do to your truck today.The 3rd chapter - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rjs53 · 03-03-2019, 12:08 AM

Worked on the seat brackets. Cut them down and inch and got the mounts so it sits back 2". And pulled it out of the garage and turned it around under its own power for the first time.

OregonNed · 03-03-2019, 12:37 AM

Took a sunny morning cruise

**zicc1835** · 03-03-2019, 10:17 PM

met up with a welder today to help Fab my exhaust this Kid is good... buddy of mine has a couple race cars recomended him Im stoked he will tig all ...i saw some of his work on stainless on the race cars unbelievable

**SoCoC10** · 03-04-2019, 12:10 AM

Paint work on the K10 Cheyenne is done. Assembly has begun...

**3757chevy** · 03-04-2019, 02:28 AM

Quote:

Originally Posted by SoCoC10

Paint work on the K10 Cheyenne is done. Assembly has begun...

Wow. Within two weeks of getting the Blazer back. You're gonna be busy.

**rechinca** · 03-04-2019, 10:42 PM

Two hours and I managed to get all of the OEM spark plug stands and wire routing clips installed as well as most of the new ground straps. Sooo much easier to do when you don’t have a radiator, exhaust manifolds and inner fenders in the way under the hood.

cornerstone · 03-05-2019, 02:14 AM

I wanted to get the cab back on the dolly so I can finish smoothing out the firewall... but the bed was on it. It took quite a bit of finagling and figuring but it’s done.

**zicc1835** · 03-05-2019, 10:13 AM

Quote:

Originally Posted by cornerstone

I wanted to get the cab back on the dolly so I can finish smoothing out the firewall... but the bed was on it. It took quite a bit of finagling and figuring but it’s done.

is that attacment lifting the bed available or did you fab it?

72c20customcamper · 03-05-2019, 11:19 AM

Appers to be an engine hoist.

Good work on getting it switched around.

**zicc1835** · 03-05-2019, 11:44 AM

Quote:

Originally Posted by 72c20customcamper

Appers to be an engine hoist.

Good work on getting it switched around.

maybe you and I are refering to the same thing Im talking about the blue apparatus you can barely see inside the bed , I have one that lifts the cab that you attach to the engine hoist(i have successfully moved my cab solo) Im wondering if there is something you can use to put inside the bed to lift with no damage ....looks like thats what he did/has /used??

Metaldoc · 03-05-2019, 12:24 PM

Power widows made from the manual regs.

cornerstone · 03-06-2019, 05:19 PM

Quote:

Originally Posted by zicc1835

maybe you and I are refering to the same thing Im talking about the blue apparatus you can barely see inside the bed , I have one that lifts the cab that you attach to the engine hoist(i have successfully moved my cab solo) Im wondering if there is something you can use to put inside the bed to lift with no damage ....looks like thats what he did/has /used??

This is what I used in conjunction with the hoist. It was 89 bucks through Northern tool.

66clow · 03-06-2019, 12:22 PM

Never ending sanding and body work. 😭

Metaldoc · 03-06-2019, 01:23 PM

Quote:

Originally Posted by 66clow

Never ending sanding and body work. 😭

Confucius say " Paint job is only as good as the prep job."

weq92f · 03-07-2019, 09:52 PM

.
Cap, rotor and plug wires...

**SlowGreen71** · 03-08-2019, 09:29 PM

Shortened her up a little and changed over to 73-87 style engine mounts. Still need to finish welding the inner sleeve and smoothing the cuts for the motor stands but it’s all in.

rjs53 · 03-08-2019, 11:29 PM

Quote:

Originally Posted by SlowGreen71

Shortened her up a little and changed over to 73-87 style engine mounts. Still need to finish welding the inner sleeve and smoothing the cuts for the motor stands but it’s all in.

Nice job!

Toms67 · 03-14-2019, 06:58 PM

Quote:

Originally Posted by SlowGreen71

Shortened her up a little and changed over to 73-87 style engine mounts. Still need to finish welding the inner sleeve and smoothing the cuts for the motor stands but it’s all in.

Nice job. Looks good.

rjs53 · 03-06-2019, 12:49 PM

Sanding, it seems like it’s never enough

66clow · 03-06-2019, 01:01 PM

Quote:

Originally Posted by rjs53

Sanding, it seems like it’s never enough

Yes you always want to do just a little bit more. Lol

89AKurt · 03-08-2019, 10:48 PM

I took my "new" truck to the mechanic to check all the fluids, and look over everything. When the differential oil came out, I heard "oh $#it". So I took pictures today.

cornerstone · 03-08-2019, 11:21 PM

Quote:

Originally Posted by 89AKurt

I took my "new" truck to the mechanic to check all the fluids, and look over everything. When the differential oil came out, I heard "oh $#it". So I took pictures today.

Is it trashed or can the spacer just be pushed in and make sure the tolerances are all in spec??
Nevermind, I found the answer on your personal thread... Thats a bummer.

89AKurt · 03-08-2019, 11:29 PM

Quote:

Originally Posted by cornerstone

Is it trashed or can the spacer just be pushed in and make sure the tolerances are all in spec??

Yea, he just pushed it back in.

Sorry, couldn't resist. It was all taken apart, cleaned, new bearings, seals, and new brakes shoes because what was on was cracked, and all new spacers. I posted a series of photos on my thread.

BugzC10 · 03-09-2019, 10:35 AM

Quote:

Originally Posted by 89AKurt

I took my "new" truck to the mechanic to check all the fluids, and look over everything. When the differential oil came out, I heard "oh $#it". So I took pictures today.

Bummer...could you hear the rear end singing when you drove it?

89AKurt · 03-09-2019, 11:17 AM

Quote:

Originally Posted by BugzC10

Bummer...could you hear the rear end singing when you drove it?

Not really, the transmission makes noise, there was water in the oil but no metal. Yes, when I was going downhill and turning right around curves, it howled. As you can see, the pinion gear was hitting the carrier (correct the terms if I got it wrong).

Here is a short video (on Facebook, sorry), showing how loose it was.
https://www.facebook.com/10000846199...4929899799056/

03-03-2019, 12:08 AM	#1
rjs53 Registered User Join Date: Jan 2010 Location: nevada Posts: 649	Re: What did you do to your truck today.The 3rd chapter Worked on the seat brackets. Cut them down and inch and got the mounts so it sits back 2". And pulled it out of the garage and turned it around under its own power for the first time. __________________ 2003 Dodge 2500 1969 C10 2014 Camaro SS/RS/1LE

03-03-2019, 12:37 AM	#2
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter Took a sunny morning cruise Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

03-03-2019, 10:17 PM	#3
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,251	Re: What did you do to your truck today.The 3rd chapter met up with a welder today to help Fab my exhaust this Kid is good... buddy of mine has a couple race cars recomended him Im stoked he will tig all ...i saw some of his work on stainless on the race cars unbelievable __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

03-04-2019, 12:10 AM	#4
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your truck today.The 3rd chapter Paint work on the K10 Cheyenne is done. Assembly has begun... Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

03-04-2019, 10:42 PM	#6
rechinca Senior Member Join Date: Jul 2018 Location: Vacaville, CA Posts: 529	Re: What did you do to your truck today.The 3rd chapter Two hours and I managed to get all of the OEM spark plug stands and wire routing clips installed as well as most of the new ground straps. Sooo much easier to do when you don’t have a radiator, exhaust manifolds and inner fenders in the way under the hood. __________________ 1971 Custom/10 - 350/3 speed, Orange/White roof

03-05-2019, 02:14 AM	#7
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: What did you do to your truck today.The 3rd chapter I wanted to get the cab back on the dolly so I can finish smoothing out the firewall... but the bed was on it. It took quite a bit of finagling and figuring but it’s done. Attached Images __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

03-05-2019, 11:19 AM	#9
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,633	Re: What did you do to your truck today.The 3rd chapter Appers to be an engine hoist. Good work on getting it switched around. __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

03-05-2019, 12:24 PM	#11
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today.The 3rd chapter Power widows made from the manual regs. Attached Images __________________ Do it, Do it right, Do it right the first time

03-06-2019, 12:22 PM	#13
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today.The 3rd chapter Never ending sanding and body work. 😭 Attached Images

03-07-2019, 09:52 PM	#15
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,155	Re: What did you do to your truck today.The 3rd chapter . Cap, rotor and plug wires... Attached Images __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold Last edited by weq92f; 03-07-2019 at 09:59 PM.

03-08-2019, 09:29 PM	#16
SlowGreen71 Junior Member Join Date: Dec 2017 Location: vader, WA Posts: 57	Re: What did you do to your truck today.The 3rd chapter Shortened her up a little and changed over to 73-87 style engine mounts. Still need to finish welding the inner sleeve and smoothing the cuts for the motor stands but it’s all in. Attached Images

03-06-2019, 12:49 PM	#19
rjs53 Registered User Join Date: Jan 2010 Location: nevada Posts: 649	Re: What did you do to your truck today.The 3rd chapter Sanding, it seems like it’s never enough __________________ 2003 Dodge 2500 1969 C10 2014 Camaro SS/RS/1LE

03-08-2019, 10:48 PM	#21
89AKurt Registered User Join Date: Dec 2015 Location: Prescott Arizona Posts: 621	Re: What did you do to your truck today.The 3rd chapter I took my "new" truck to the mechanic to check all the fluids, and look over everything. When the differential oil came out, I heard "oh $#it". So I took pictures today. __________________ 1968 Long Bed 2016 Honda Civic Coupe EX-T ticket magnet



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.