![]() |
![]() |
#1 |
Registered User
![]() Join Date: Apr 2015
Location: Bloomingdale, Georgia
Posts: 22
|
Rally Wheel Lug Nuts
I need some help. I need to get my wheels and tires off, but cannot figure out what's going on with my lug nuts. Has anyone seen these before and does anyone have any suggestions on how to remove them? I 17mm socket fits on them but my 17mm tire iron doesn't (no idea how that works). Do these require a special keyed socket?
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2010
Location: Irmo, SC
Posts: 141
|
Re: Rally Wheel Lug Nuts
Those are spline drive and do require a special socket. If you try to remove them with a normal socket they'll round off and you'll have a bad time.
|
![]() |
![]() |
![]() |
#3 | |
Registered User
![]() Join Date: Apr 2015
Location: Bloomingdale, Georgia
Posts: 22
|
Re: Rally Wheel Lug Nuts
Quote:
https://www.lowes.com/pd/Kobalt-Univ...ket/1000073671 |
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2010
Location: Irmo, SC
Posts: 141
|
Re: Rally Wheel Lug Nuts
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jun 2010
Location: Irmo, SC
Posts: 141
|
Re: Rally Wheel Lug Nuts
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2011
Location: Las Vegas, NV
Posts: 264
|
Re: Rally Wheel Lug Nuts
The socket you are referring to is called a spline key. Any tire chain store should be able to let you use a spline key that fits that lug set, however they may make you buy a new spline lug nut kit to get to keep a key as I don’t know if they sell just the key.
__________________
1971 C10 - LWB shortened to SWB, welded in my C notch, reinforced trailing arms with 3/16 plate, new cpp 5" rear drop springs, 2" drop blocks, ece super panhard kit. Cpp drop spindles, 2 inch front springs, 5.3/4L80E I call it Bruce Banner.. |
![]() |
![]() |
![]() |
Bookmarks |
|
|