Blazer rear cargo side panels

[harrij4]

Originally Posted by cstanley

only part i had a little trouble taking-off is the radius over the wheel wells. it's just a guess right now. i'll upload in a few...

EDIT:
OK, HERE'S A SCALED SKETCH I WHIPPED OUT. PRINT ON REGULAR 8-1/2"X11" PAPER. MAKE SURE THAT IT'S NOT SET TO "SCALE TO FIT" OPTION, SO THAT IT WILL COME OUT AT THE CORRECT SCALE.

i ALSO HAVE THE FILES IN .DWG OR WHATEVER YOU WANT, JUST LET ME KNOW. THESE ARE NOT PERFECT. THE OVERALL DIMS ARE CORRECT, BUT I'M NOT CERTAIN ABOUT THE RADII OVER THE WHEEL WELLS. I'LL HAVE TO DOUBLE-CHECK THAT WHEN I GET HOME.

OH, AND IF YOU WANT THEM FORMATTED FOR FULL-SCALE OR 11X17 LET ME KNOW!

the image is just what the attached pdf looks like. I also uploaded a .zip file that contains a pair of autocad files. I saved them down to version 2004.
enjoy!

now for the disclaimer: I have not removed my side panels during this process. all measurements were done with the panels installed, but I still believe them to be accurate. If anyone finds otherwise, please let me know and I'll make changes...

Understanding that this is an ANCIENT thread, has anyone directly used these profiles for their panels? Did they fit? I have access to a waterjet and CNC router at work and I'd like to fab mine out of HDPE plate then upholster them. But, i'd love to know that these actually fit before I start cutting stock. If nobody has used these, I'll volunteer to use the gerber machine to cut these from cardboard and report back as to how they fit.