72 GMC 3/4 Ton For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smonty · 05-18-2004, 01:10 PM

PRICE LOWERED TO $650.00!!!!

I have a 72 3/4 ton GMC LWB truck that is located in Tulsa, OK that I need to sell.

Bad Things:

1. Needs Paint and minor body work
2. Motor runs but has cracked block (check out good things though)

Good Things:

1. Good power brakes as they were redone by the previous owner.
2. Power steering that is awesome!
3. Cab and doors are excellent with very little repair to be done on them. The rust that I have seen was in one of the rocker panels.
4. The clutch, pressure plate, etc has been replaced and the flywheel has been resurfaced.
5. I am including another motor that was in my 70 truck that was rebuilt and has about 30,000 on the rebuild. You can use the bottom end from this motor and the rest from the motor in the truck and drive the truck anywhere.
The motor from my 70 did not use oil.
6. The interior needs little work as it was taken care of. It comes with a nice set of black (3) seatbelts. The door panels are in great condition.
7. Truck has heavy duty springs w/helpers.
8. The grille is nice
9. It has a heavy duty bumper guard
10. The body needs very little work to get ready to paint.
11. Good tires 80%

Specs:

1. 250 inline 6 cyl
2. 4-speed w/granny tranny
3. Power Disc Brakes
4. Power Steering.

Price: $650.00

This is a great deal for someone who needs a hauler or reliable driver or for the many good parts on it.

I do not have any pictures of it as it is in Tulsa, OK but will try to get a friend of mine there to take some for me.

Thanks for looking!

Ernie
smonty46@hotmail.com

Chevyguy111786 · 05-18-2004, 06:35 PM

might be interested. is the truck complete? color? or colors? haha. what is needed to make it a driver? just an engine? how fast you need to get rid of it?

smonty · 05-19-2004, 01:35 AM

I need to sell it as I am buying another project truck and need to generate some $$$. I am willing to work something out with you if you don't have all the cash. It is at a mechanics house in Tulsa and will be secure there until it is picked up. It has a clean OK title. The truck is excellent mechanically and needs nothing except switching the bottom end out with the good bottom end of the engine I am including with the truck. I commuted to Dallas in my 70 truck with this engine and put about 20,000 miles on it with no problems and no oil loss. If you switch the engine out you will have a great running hauler that will need nothing else mechanically. The body is in good condition with very few dents or rust. It don't look pretty though as the truck is partly green and there is white on it and,oh yeah, it has a very nice blue GMC tailgate (its worth $200.00). The interior is black and is nice. The bed floor has some dent issues but is solid. My friend fixed the truck mechanically and used it to move from Seattle, Wa to Tulsa, OK and had no problems. Then drove it hauling trucks and such until the tired motor ran too low on oil and the block cracked. We were hauling some parts of mine from Tyler to here and the motor started making noise as it was severly low on oil so we added oil and noticed that the block was cracked. We then patched it with marine epoxy and proceeded to the house, unloaded my parts and then he drove it on to Tulsa. The old girl is pretty stout. It still runs by the way and can be driven onto a trailer as is. Would just take a quart of oil to do it! LOL! It is too good of a truck to part out.

Just let me know if you want to work something out on it. Also, you are welcome to come out here to install the motor since it is here at the farm. We could do this in an afternoon if you brought a couple of six packs! I have some alcoholic neighbors who are mechanics that would be willing to help.

Ernie
smonty46@hotmail.com

Chevyguy111786 · 05-19-2004, 04:39 PM

well i have the money...and would be able to pick it up in a couple weeks. but just have to decide if it would be the right decision...lol. is it an a/c dash?

Chevyguy111786 · 05-19-2004, 09:21 PM

also, does it have any trim?

smonty · 05-20-2004, 01:58 AM

The truck does not have air or an air cab. It does have the lower trim. The trim is pretty beat up but there is a board member who has a complete set in good condition that you could do some swapping with or buy for $50.00 or just fill in the trim and go with the smooth look. As for it being the right decision for you I do not know. It is nice pulling a trailer with a 3/4 ton vs a 1/2 ton. This truck needs no work mechanically except for the motor. The power steering is awesome as are the power disc brakes when you have to stop with a car hauler with a 5000 lb truck on it. And the tires are good! Have I sold you on it yet! LOL!!! Just let me know.

Take care,

Ernie

Chevyguy111786 · 05-20-2004, 04:38 PM

i'm sold, just don't know if my pocket book is...if someone else comes up with an offer that you wanna take, go on and take it...i'll do some looking over stuff and get back to you with my answer either way i decide.

smonty · 05-21-2004, 12:52 AM

I have quite a few tire kickers and trade offers but I really need the cash. I am not going to take an offer lower than $750.00. It has all the good parts on it that I could part it out for that or more but I would really hate to. Just let me know. The truck is safe and can sit there for some time if you need time to pick it up.

Ernie

Chevyguy111786 · 05-21-2004, 11:52 PM

alright, i'll put some thought into it...but don't wait on me to give you an answer if someone wants it. still have to consider some other things.

smonty · 05-22-2004, 12:43 AM

Okey-Dokey. Just let me know. I will post the truck sold if I get a buyer.

Ernie

smonty · 05-23-2004, 01:23 AM

Taking a trip to the top.

smonty · 05-23-2004, 09:17 PM

How can you resist $650.00!!!

Thanks for looking,

Ernie

teeitup · 05-23-2004, 09:59 PM

Pm'd you Ernie!!!!!

Chevyguy111786 · 05-23-2004, 10:46 PM

man i might have to take it for that price if teeitup doesn't give him first dibs on the new price though

smonty · 05-24-2004, 01:23 AM

It is yours if you want it just let me know ASAP. Randy knows someone that may want it but he is not buying it. You are first in line. It is a good truck.

Ernie

Jwill41 · 05-24-2004, 07:55 AM

Very tempting Ernie. My wife would slap me and my driveway is already full.

smonty · 05-24-2004, 09:38 PM

This truck is still for sale for $650.00.

Ernie

rambler · 05-25-2004, 10:26 AM

I'm interested as well, but would like to see some pics.. I'll be in Tulsa in a couple of weeks....

smonty · 05-25-2004, 10:41 AM

Will try to get some pictures posted but the truck is in Tulsa and I am in Dallas so it might be a while.

Ernie

rambler · 05-25-2004, 11:04 AM

Quote:

Originally Posted by smonty

Will try to get some pictures posted but the truck is in Tulsa and I am in Dallas so it might be a while.

Ernie

understood, I'll let you know when I'm heading for Tulsa,, maybe look at it then,, would be much easier to drive it back... then to haul with trailer though...

smonty · 05-26-2004, 01:40 AM

This is a good deal for someone who needs a hauler.

Thanks again for looking,

Ernie

05-18-2004, 01:10 PM	#1
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	72 GMC 3/4 Ton For Sale $650.00 PRICE LOWERED TO $650.00!!!! I have a 72 3/4 ton GMC LWB truck that is located in Tulsa, OK that I need to sell. Bad Things: 1. Needs Paint and minor body work 2. Motor runs but has cracked block (check out good things though) Good Things: 1. Good power brakes as they were redone by the previous owner. 2. Power steering that is awesome! 3. Cab and doors are excellent with very little repair to be done on them. The rust that I have seen was in one of the rocker panels. 4. The clutch, pressure plate, etc has been replaced and the flywheel has been resurfaced. 5. I am including another motor that was in my 70 truck that was rebuilt and has about 30,000 on the rebuild. You can use the bottom end from this motor and the rest from the motor in the truck and drive the truck anywhere. The motor from my 70 did not use oil. 6. The interior needs little work as it was taken care of. It comes with a nice set of black (3) seatbelts. The door panels are in great condition. 7. Truck has heavy duty springs w/helpers. 8. The grille is nice 9. It has a heavy duty bumper guard 10. The body needs very little work to get ready to paint. 11. Good tires 80% Specs: 1. 250 inline 6 cyl 2. 4-speed w/granny tranny 3. Power Disc Brakes 4. Power Steering. Price: $650.00 This is a great deal for someone who needs a hauler or reliable driver or for the many good parts on it. I do not have any pictures of it as it is in Tulsa, OK but will try to get a friend of mine there to take some for me. Thanks for looking! Ernie smonty46@hotmail.com __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project Last edited by smonty; 05-23-2004 at 09:19 PM. Reason: New Low Price!

05-19-2004, 01:35 AM	#3
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to Chevyguy111786 I need to sell it as I am buying another project truck and need to generate some $$$. I am willing to work something out with you if you don't have all the cash. It is at a mechanics house in Tulsa and will be secure there until it is picked up. It has a clean OK title. The truck is excellent mechanically and needs nothing except switching the bottom end out with the good bottom end of the engine I am including with the truck. I commuted to Dallas in my 70 truck with this engine and put about 20,000 miles on it with no problems and no oil loss. If you switch the engine out you will have a great running hauler that will need nothing else mechanically. The body is in good condition with very few dents or rust. It don't look pretty though as the truck is partly green and there is white on it and,oh yeah, it has a very nice blue GMC tailgate (its worth $200.00). The interior is black and is nice. The bed floor has some dent issues but is solid. My friend fixed the truck mechanically and used it to move from Seattle, Wa to Tulsa, OK and had no problems. Then drove it hauling trucks and such until the tired motor ran too low on oil and the block cracked. We were hauling some parts of mine from Tyler to here and the motor started making noise as it was severly low on oil so we added oil and noticed that the block was cracked. We then patched it with marine epoxy and proceeded to the house, unloaded my parts and then he drove it on to Tulsa. The old girl is pretty stout. It still runs by the way and can be driven onto a trailer as is. Would just take a quart of oil to do it! LOL! It is too good of a truck to part out. Just let me know if you want to work something out on it. Also, you are welcome to come out here to install the motor since it is here at the farm. We could do this in an afternoon if you brought a couple of six packs! I have some alcoholic neighbors who are mechanics that would be willing to help. Ernie smonty46@hotmail.com __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-20-2004, 01:58 AM	#6
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to Chevyguy111786 The truck does not have air or an air cab. It does have the lower trim. The trim is pretty beat up but there is a board member who has a complete set in good condition that you could do some swapping with or buy for $50.00 or just fill in the trim and go with the smooth look. As for it being the right decision for you I do not know. It is nice pulling a trailer with a 3/4 ton vs a 1/2 ton. This truck needs no work mechanically except for the motor. The power steering is awesome as are the power disc brakes when you have to stop with a car hauler with a 5000 lb truck on it. And the tires are good! Have I sold you on it yet! LOL!!! Just let me know. Take care, Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-21-2004, 12:52 AM	#8
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to Chevyguy111786 I have quite a few tire kickers and trade offers but I really need the cash. I am not going to take an offer lower than $750.00. It has all the good parts on it that I could part it out for that or more but I would really hate to. Just let me know. The truck is safe and can sit there for some time if you need time to pick it up. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-22-2004, 12:43 AM	#10
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to Chevyguy111786 Okey-Dokey. Just let me know. I will post the truck sold if I get a buyer. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-18-2004, 06:35 PM	#2
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	might be interested. is the truck complete? color? or colors? haha. what is needed to make it a driver? just an engine? how fast you need to get rid of it?

05-19-2004, 04:39 PM	#4
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	well i have the money...and would be able to pick it up in a couple weeks. but just have to decide if it would be the right decision...lol. is it an a/c dash?

05-19-2004, 09:21 PM	#5
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	also, does it have any trim?

05-20-2004, 04:38 PM	#7
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	i'm sold, just don't know if my pocket book is...if someone else comes up with an offer that you wanna take, go on and take it...i'll do some looking over stuff and get back to you with my answer either way i decide.

05-21-2004, 11:52 PM	#9
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	alright, i'll put some thought into it...but don't wait on me to give you an answer if someone wants it. still have to consider some other things.

05-23-2004, 01:23 AM	#11
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Ttt Taking a trip to the top. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-23-2004, 09:17 PM	#12
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	New Price Of $650.00 How can you resist $650.00!!! Thanks for looking, Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-23-2004, 09:59 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Pm'd you Ernie!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-23-2004, 10:46 PM	#14
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	man i might have to take it for that price if teeitup doesn't give him first dibs on the new price though

05-24-2004, 01:23 AM	#15
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to Chevyguy111786 It is yours if you want it just let me know ASAP. Randy knows someone that may want it but he is not buying it. You are first in line. It is a good truck. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project



Register or Log In To remove these advertisements.

05-24-2004, 07:55 AM	#16
Jwill41 Registered User Join Date: Aug 2002 Location: Farmers Branch, Tx Posts: 1,009	Very tempting Ernie. My wife would slap me and my driveway is already full. __________________ http://www.picturetrail.com/jwill41 67 1/2 ton GMC short step side 68 1/2 ton Chevy long fleet side 72 1/2 ton Chevy Suburban 99 1/2 ton Chevy Suburban founder (and only member) of the primer/clearcoat club

05-24-2004, 09:38 PM	#17
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Truck Is Still For Sale! This truck is still for sale for $650.00. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-25-2004, 10:26 AM	#18
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	I'm interested as well, but would like to see some pics.. I'll be in Tulsa in a couple of weeks.... __________________ No matter where you are..... There you are... Buckaroo Banzi

05-25-2004, 10:41 AM	#19
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply to Rambler Will try to get some pictures posted but the truck is in Tulsa and I am in Dallas so it might be a while. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

05-26-2004, 01:40 AM	#21
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Back to the top This is a good deal for someone who needs a hauler. Thanks again for looking, Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

Register or Log In To remove these advertisements.