68 Chevy , $100 Cheap , got to go - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boilermaker · 05-06-2004, 03:23 PM

I got a 1968 Chevy C-10 truck, Short wheel base model , that is in my shop for a complete rebuild and stock floor body drop. I have ran out of room and time. SO I am gonna pass it on to someone else for the cheapest price you haev ever seen. $100 for the truck as it sits in the pics, $300 and I will throw in the brand new Chrome Front and Rear bumpers, from Classic Industries. For $400 I will include the bumpers, and 2 stalks 2x3 Tubing for the frame. Or for the $3500 I will finish the body drop and replace all rust with new panels.

Here is how she sits as of right now. Located in Coolidge , GA 31738

The floors are rusty, rockers are rusty, Front pass fender has about 3 inches of the front fender gone, and some rot in the back of it. Driver fender is perfect. Doors are good, Cab corners are good on outside, rusty where they meet rockers, frame appears to be straight and is all there. Master Cylinder is gone. Drum brakes all the way around. Hood has had bondo work in the past. All chrome headlight trim is there. I have the bed also, but it is pretty bad. You will need a trailer to pick it up. I have tried to tell everything about it but I am sure I missed something but for a $100 you can't go wrong. Even if you just use the door.

Here are the pics
Passenger Side

Driver Side

Driver Cab Corner

Driver Side Rocker

FRame

Hood

Hood#2

Interior

Passenger Fender

Passenger Fender #2

Passenger Rocker

Rdrdave · 05-06-2004, 07:13 PM

Do you have rats with steel teeth or find that in the ocean?! WOW I've never seen a floor rotted out that bad! Good luck.

68 chevy truck-TPI · 05-06-2004, 07:32 PM

no motor or trans? do you know what rear end it has? what part of GA do you live in?

Blue68 · 05-08-2004, 01:30 AM

Consider selling the bumpers without the truck?

Johnny Outdoors · 05-10-2004, 12:30 AM

how about sellin the steering wheel?

67ChevyC10Stepside · 05-10-2004, 12:51 AM

i would buy that thing in a heartbeat use parts of it and pretty much give the rest away is there any way someone out there could help me get it? i will pay gas etc of course

boilermaker · 05-10-2004, 02:32 PM

Bumpers are $200 plus shipping

No motor or trans. No idea on Rearend. I bought the truck as it sits for $100 from a local guy. No idea on anything

Steerign wheel, yeah I'll sell it for $100 and it comes witha free truck also.

No rats, Damn Possums

krue · 05-10-2004, 09:35 PM

Where in Georgia is it, I have a brother in Cordele that might be interested.

Longhorn Man · 05-10-2004, 11:08 PM

Quote:

Originally Posted by Rdrdave

Do you have rats with steel teeth or find that in the ocean?! WOW I've never seen a floor rotted out that bad! Good luck.

Dude..come to the rust belt for a depressing vacation. The floors rust out o bad that the fuel tanks fall out, then the owners block them back up with 2X4 beams and seal the floor with expanding foam.
No joke.

boilermaker · 05-11-2004, 08:45 AM

Coolidge, GA

About 70 miles from Cordele. I am on Hwy 319 in between Moultrie and Thomasville

spencra · 05-11-2004, 03:48 PM

Quote:

Dude..come to the rust belt for a depressing vacation. The floors rust out o bad that the fuel tanks fall out, then the owners block them back up with 2X4 beams and seal the floor with expanding foam.

Yup, i've seen that one many a times.
I've also seen floors in much worse condition. I use to own one, a 57 Chevy 3100 stepside with floors and firewall almost completely rotted out. Let her rest in peace.

boilermaker · 05-21-2004, 01:31 PM

Still here. Come on folks.

Will part it out, also

67ChevyC10Stepside · 05-22-2004, 01:11 AM

i would love to have it how much for grille? and how about the fenders doors...give me prices for all that.

boilermaker · 05-24-2004, 09:18 AM

I can pull everything off. Doors are $100 each, grille $25, Frender $75

Or you can getthe whole truck for $100 and I want have to tear it apart

67ChevyC10Stepside · 05-24-2004, 02:14 PM

i live in pennsylvania......if i could get it believe me i would but i still need the grille especially and would like the right door how much to ship the stuff? what kinda shape are the fenders in?

krue · 05-24-2004, 06:16 PM

My brother or sister-in-law in Cordele will be on here shortly to get contact info from you. They are interested.

67ChevyC10Stepside · 05-24-2004, 07:00 PM

can you get me shipping prices to butler pa 16001 on the grille filler panel and right door please?

boilermaker · 05-26-2004, 03:59 PM

Shippign to AP for the door and grille is $100. That'll br crated and insured. Driver fender is perfect. Pass is missing 6 inches on teh fron edge bottom

05-06-2004, 03:23 PM	#1
boilermaker Registered User Join Date: May 2004 Posts: 8	68 Chevy , $100 Cheap , got to go I got a 1968 Chevy C-10 truck, Short wheel base model , that is in my shop for a complete rebuild and stock floor body drop. I have ran out of room and time. SO I am gonna pass it on to someone else for the cheapest price you haev ever seen. $100 for the truck as it sits in the pics, $300 and I will throw in the brand new Chrome Front and Rear bumpers, from Classic Industries. For $400 I will include the bumpers, and 2 stalks 2x3 Tubing for the frame. Or for the $3500 I will finish the body drop and replace all rust with new panels. Here is how she sits as of right now. Located in Coolidge , GA 31738 The floors are rusty, rockers are rusty, Front pass fender has about 3 inches of the front fender gone, and some rot in the back of it. Driver fender is perfect. Doors are good, Cab corners are good on outside, rusty where they meet rockers, frame appears to be straight and is all there. Master Cylinder is gone. Drum brakes all the way around. Hood has had bondo work in the past. All chrome headlight trim is there. I have the bed also, but it is pretty bad. You will need a trailer to pick it up. I have tried to tell everything about it but I am sure I missed something but for a $100 you can't go wrong. Even if you just use the door. Here are the pics Passenger Side Driver Side Driver Cab Corner Driver Side Rocker FRame Hood Hood#2 Interior Passenger Fender Passenger Fender #2 Passenger Rocker

05-08-2004, 01:30 AM	#4
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	Consider selling the bumpers without the truck? __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-10-2004, 12:30 AM	#5
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	how about sellin the steering wheel? __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

05-10-2004, 12:51 AM	#6
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	i would buy that thing in a heartbeat use parts of it and pretty much give the rest away is there any way someone out there could help me get it? i will pay gas etc of course __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-10-2004, 09:35 PM	#8
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Where in Georgia is it, I have a brother in Cordele that might be interested. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-06-2004, 07:13 PM	#2
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Do you have rats with steel teeth or find that in the ocean?! WOW I've never seen a floor rotted out that bad! Good luck.

05-06-2004, 07:32 PM	#3
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	no motor or trans? do you know what rear end it has? what part of GA do you live in?

05-10-2004, 02:32 PM	#7
boilermaker Registered User Join Date: May 2004 Posts: 8	Bumpers are $200 plus shipping No motor or trans. No idea on Rearend. I bought the truck as it sits for $100 from a local guy. No idea on anything Steerign wheel, yeah I'll sell it for $100 and it comes witha free truck also. No rats, Damn Possums

05-11-2004, 08:45 AM	#10
boilermaker Registered User Join Date: May 2004 Posts: 8	Coolidge, GA About 70 miles from Cordele. I am on Hwy 319 in between Moultrie and Thomasville

05-21-2004, 01:31 PM	#12
boilermaker Registered User Join Date: May 2004 Posts: 8	Still here. Come on folks. Will part it out, also

05-22-2004, 01:11 AM	#13
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	i would love to have it how much for grille? and how about the fenders doors...give me prices for all that. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-24-2004, 09:18 AM	#14
boilermaker Registered User Join Date: May 2004 Posts: 8	I can pull everything off. Doors are $100 each, grille $25, Frender $75 Or you can getthe whole truck for $100 and I want have to tear it apart

05-24-2004, 02:14 PM	#15
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	i live in pennsylvania......if i could get it believe me i would but i still need the grille especially and would like the right door how much to ship the stuff? what kinda shape are the fenders in? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-24-2004, 06:16 PM	#16
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	My brother or sister-in-law in Cordele will be on here shortly to get contact info from you. They are interested. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-24-2004, 07:00 PM	#17
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	can you get me shipping prices to butler pa 16001 on the grille filler panel and right door please? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.



Register or Log In To remove these advertisements.

05-26-2004, 03:59 PM	#18
boilermaker Registered User Join Date: May 2004 Posts: 8	Shippign to AP for the door and grille is $100. That'll br crated and insured. Driver fender is perfect. Pass is missing 6 inches on teh fron edge bottom

Register or Log In To remove these advertisements.