Overdrive kick-down switch bracket for straight six - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sfcharr · 04-25-2019, 07:38 PM

I am trying to get my overdrive transmission working as designed but I'm missing the kick-down switch and bracket. Does anyone have a picture of the bracket? I am good a fabricating but would like an idea as to where to start. My searches for this bracket has come up empty, 250 straight six.

thanks in advance

Anyone have a picture or a diagram?

geezer#99 · 04-25-2019, 10:37 PM

What overdrive are you talking about?

sfcharr · 04-26-2019, 07:58 AM

It's a Muncie, 3 speed. With a a non-syncro 1 gear. I am trying to get it operating as it was designed, at least as close as I can get it. I just need some ideas on the kick-down bracket

**NewBayColony** · 04-27-2019, 08:00 AM

I am doing the same project later this summer. I have a 72 with a 292 so it should be close to the same. How far along are you?
I have a kickdown switch and bracket but the bracket is for a 63 Impala I believe was a 283. judging from the oily film on it, it was mounted on the carb. I was thinking of mounting it on the bracket the gas pedal is mounted on so it comes in contact with the cable. I'll send you a picture of the switch and bracket later.

sfcharr · 04-27-2019, 10:15 AM

I have everything to complete. Need to fab the bracket, then mount the relay, hook the harness up, should be ready for testing.

sfcharr · 04-29-2019, 09:30 PM

Ttt

**NewBayColony** · 05-01-2019, 07:23 AM

**NewBayColony** · 05-01-2019, 07:24 AM

Name: brak1.jpg
Views: 213
Size: 37.7 KB

**NewBayColony** · 05-01-2019, 07:24 AM

Name: brak2.jpg
Views: 212
Size: 31.1 KB

**NewBayColony** · 05-01-2019, 07:26 AM

Name: brak4.jpg
Views: 217
Size: 36.9 KB

Sorry it took so long to do this. Hope this helps.
What gear oil did you use in your transmission?

**NewBayColony** · 05-01-2019, 07:29 AM

Name: brak3.jpg
Views: 177
Size: 28.7 KB

sfcharr · 05-01-2019, 08:23 AM

Thank you so much! I assume this bracket was bolted to the base of carb?

**NewBayColony** · 05-01-2019, 08:31 AM

Quote:

Originally Posted by sfcharr

Thank you so much! I assume this bracket was bolted to the base of carb?

I don't know. I got it like this. I sure looks lie it but again I think it came off of a 283.
What gear oil did you use in the transmission? Did you find an original relay?

sfcharr · 05-01-2019, 08:51 AM

I believe I used GL1 gear oil as recommended by online sources. The relay I have to use is a Standard Motor Products RY12 Relay. I have converted the engine to electronic ignition and have been told this is the relay to use for this setup.

**NewBayColony** · 05-01-2019, 09:13 AM

Quote:

Originally Posted by sfcharr

I believe I used GL1 gear oil as recommended by online sources. The relay I have to use is a Standard Motor Products RY12 Relay. I have converted the engine to electronic ignition and have been told this is the relay to use for this setup.

Thanks.

04-25-2019, 07:38 PM	#1
sfcharr Registered User Join Date: Aug 2010 Location: Castle Rock CO Posts: 76	Overdrive kick-down switch bracket for straight six I am trying to get my overdrive transmission working as designed but I'm missing the kick-down switch and bracket. Does anyone have a picture of the bracket? I am good a fabricating but would like an idea as to where to start. My searches for this bracket has come up empty, 250 straight six. thanks in advance Anyone have a picture or a diagram? Last edited by sfcharr; 04-29-2019 at 09:30 PM.

04-25-2019, 10:37 PM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,723	Re: Overdrive kick-down switch bracket for straight six What overdrive are you talking about?

04-26-2019, 07:58 AM	#3
sfcharr Registered User Join Date: Aug 2010 Location: Castle Rock CO Posts: 76	Re: Overdrive kick-down switch bracket for straight six It's a Muncie, 3 speed. With a a non-syncro 1 gear. I am trying to get it operating as it was designed, at least as close as I can get it. I just need some ideas on the kick-down bracket

04-27-2019, 08:00 AM	#4
NewBayColony Senior Member Join Date: Mar 2017 Location: Northbridge,MA Posts: 494	Re: Overdrive kick-down switch bracket for straight six I am doing the same project later this summer. I have a 72 with a 292 so it should be close to the same. How far along are you? I have a kickdown switch and bracket but the bracket is for a 63 Impala I believe was a 283. judging from the oily film on it, it was mounted on the carb. I was thinking of mounting it on the bracket the gas pedal is mounted on so it comes in contact with the cable. I'll send you a picture of the switch and bracket later. __________________ 72 C20 292 3OTT 77 GMC 2500 4x4 Longstepper 350 4sp 50 3100 ex Airforce/Town of Mendon fire truck 72 GMC 1500 2wd short stepside 250 4sp 78 GMC 2500 4x Longstepper 292 4sp 54 6400 Chevy 5 window 4 sp 2sp vac rear end Shell oil truck/dump truck (Norman)

04-27-2019, 10:15 AM	#5
sfcharr Registered User Join Date: Aug 2010 Location: Castle Rock CO Posts: 76	Re: Overdrive kick-down switch bracket for straight six I have everything to complete. Need to fab the bracket, then mount the relay, hook the harness up, should be ready for testing.

04-29-2019, 09:30 PM	#6
sfcharr Registered User Join Date: Aug 2010 Location: Castle Rock CO Posts: 76	Re: Overdrive kick-down switch bracket for straight six Ttt

05-01-2019, 07:23 AM	#7
NewBayColony Senior Member Join Date: Mar 2017 Location: Northbridge,MA Posts: 494	Re: Overdrive kick-down switch bracket for straight six __________________ 72 C20 292 3OTT 77 GMC 2500 4x4 Longstepper 350 4sp 50 3100 ex Airforce/Town of Mendon fire truck 72 GMC 1500 2wd short stepside 250 4sp 78 GMC 2500 4x Longstepper 292 4sp 54 6400 Chevy 5 window 4 sp 2sp vac rear end Shell oil truck/dump truck (Norman)

05-01-2019, 07:24 AM	#8
NewBayColony Senior Member Join Date: Mar 2017 Location: Northbridge,MA Posts: 494	Re: Overdrive kick-down switch bracket for straight six __________________ 72 C20 292 3OTT 77 GMC 2500 4x4 Longstepper 350 4sp 50 3100 ex Airforce/Town of Mendon fire truck 72 GMC 1500 2wd short stepside 250 4sp 78 GMC 2500 4x Longstepper 292 4sp 54 6400 Chevy 5 window 4 sp 2sp vac rear end Shell oil truck/dump truck (Norman)

05-01-2019, 07:26 AM	#10
NewBayColony Senior Member Join Date: Mar 2017 Location: Northbridge,MA Posts: 494	Re: Overdrive kick-down switch bracket for straight six Sorry it took so long to do this. Hope this helps. What gear oil did you use in your transmission? __________________ 72 C20 292 3OTT 77 GMC 2500 4x4 Longstepper 350 4sp 50 3100 ex Airforce/Town of Mendon fire truck 72 GMC 1500 2wd short stepside 250 4sp 78 GMC 2500 4x Longstepper 292 4sp 54 6400 Chevy 5 window 4 sp 2sp vac rear end Shell oil truck/dump truck (Norman)

05-01-2019, 07:29 AM	#11
NewBayColony Senior Member Join Date: Mar 2017 Location: Northbridge,MA Posts: 494	Re: Overdrive kick-down switch bracket for straight six __________________ 72 C20 292 3OTT 77 GMC 2500 4x4 Longstepper 350 4sp 50 3100 ex Airforce/Town of Mendon fire truck 72 GMC 1500 2wd short stepside 250 4sp 78 GMC 2500 4x Longstepper 292 4sp 54 6400 Chevy 5 window 4 sp 2sp vac rear end Shell oil truck/dump truck (Norman)

05-01-2019, 08:23 AM	#12
sfcharr Registered User Join Date: Aug 2010 Location: Castle Rock CO Posts: 76	Re: Overdrive kick-down switch bracket for straight six Thank you so much! I assume this bracket was bolted to the base of carb?

05-01-2019, 08:51 AM	#14
sfcharr Registered User Join Date: Aug 2010 Location: Castle Rock CO Posts: 76	Re: Overdrive kick-down switch bracket for straight six I believe I used GL1 gear oil as recommended by online sources. The relay I have to use is a Standard Motor Products RY12 Relay. I have converted the engine to electronic ignition and have been told this is the relay to use for this setup.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.