Please help identify engine. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Marty68 · 05-19-2019, 10:17 PM

I have searched and can not find my casting number listed. Was told it is a 283. I not know year or any details please help.solve the puzzle. Looks to have bellhousing changed with engine. Bellhousing # searched out to be 12 " truck. I hope to put a newer stuck behind it t5? Unsure as of yet.

Marty68 · 05-19-2019, 10:23 PM

Here is bellhousing #

**Captainfab** · 05-19-2019, 10:57 PM

The DE code comes up as either a 283 or a 307. Your casting number of 3849852 comes up as a '58-'66 283.

http://www.nastyz28.com/gm-chevy-cod...s-suffix-4.php

https://www.mortec.com/castnum.htm

Marty68 · 05-20-2019, 05:02 AM

Did a 307 ever have the cartridge filter? Will this bellhousing work with a t5?

68Gold/white · 05-20-2019, 08:33 AM

Quote:

Originally Posted by Marty68

Did a 307 ever have the cartridge filter? Will this bellhousing work with a t5?

307's started in 68. To my knowledge a 307 would not have a cartridge filter. I have seen a couple 307's, they had spin on filters.
68 was the first year for larger crank journals on all small blocks. 68 and up blocks no longer had the "breather" passage at rear of block, by the dist. hole, either.

Someone here will likely have info on the bell housing, that part of the question is waaay to new for me...

geezer#99 · 05-20-2019, 09:08 AM

Might find a bit of info in here on T5 swapping.
http://67-72chevytrucks.com/vboard/s...d.php?t=313954

Marty68 · 05-20-2019, 06:04 PM

I was on a 4spd swap site they said that truck bellhousing will alow a 12" Clutch but should not be used with a "car" trans without a bushing? Adapter....
Researching option puting with 51. Have to finish just needs cab painted. All body work done just needs prime block prime sand paint.

geezer#99 · 05-20-2019, 07:05 PM

What are you running for a rear end?
What ratio?

Marty68 · 05-20-2019, 09:27 PM

i just bought a 3.42 s10 4x4 rear

geezer#99 · 05-20-2019, 09:41 PM

Fairly wide rearend.

With that ratio you likely won’t need an o/d tranny.

Marty68 · 05-20-2019, 10:30 PM

that gear is the most common in a blazer i think an overdrive would put you at 1800 rpm at 60 (283 may not have enough torque...) th350 would be 2400 rpm at 65 long term i want MII... just saw a local guy selling rebuilt th350 long or short shft. $375. would need floor shifter converter flex plate kick down cable and cross member.
still thinking
open to advice and sugestions.
th350 is stronger than t5

geezer#99 · 05-20-2019, 10:39 PM

283 is happier at higher rpm.
Most motors are.
Around 2500 at cruise.
Good deal on a t350.
Likely all done would be same price as a t5 conversion.

05-19-2019, 10:17 PM	#1
Marty68 Registered User Join Date: Nov 2014 Location: west coast, Wi Posts: 534	Please help identify engine. I have searched and can not find my casting number listed. Was told it is a 283. I not know year or any details please help.solve the puzzle. Looks to have bellhousing changed with engine. Bellhousing # searched out to be 12 " truck. I hope to put a newer stuck behind it t5? Unsure as of yet. Attached Images

05-19-2019, 10:23 PM	#2
Marty68 Registered User Join Date: Nov 2014 Location: west coast, Wi Posts: 534	Re: Please help identify engine. Here is bellhousing # Attached Images

05-19-2019, 10:57 PM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: Please help identify engine. The DE code comes up as either a 283 or a 307. Your casting number of 3849852 comes up as a '58-'66 283. http://www.nastyz28.com/gm-chevy-cod...s-suffix-4.php https://www.mortec.com/castnum.htm __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-20-2019, 05:02 AM	#4
Marty68 Registered User Join Date: Nov 2014 Location: west coast, Wi Posts: 534	Re: Please help identify engine. Did a 307 ever have the cartridge filter? Will this bellhousing work with a t5?

05-20-2019, 09:08 AM	#6
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,721	Re: Please help identify engine. Might find a bit of info in here on T5 swapping. http://67-72chevytrucks.com/vboard/s...d.php?t=313954

05-20-2019, 06:04 PM	#7
Marty68 Registered User Join Date: Nov 2014 Location: west coast, Wi Posts: 534	Re: Please help identify engine. I was on a 4spd swap site they said that truck bellhousing will alow a 12" Clutch but should not be used with a "car" trans without a bushing? Adapter.... Researching option puting with 51. Have to finish just needs cab painted. All body work done just needs prime block prime sand paint. Attached Images

05-20-2019, 07:05 PM	#8
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,721	Re: Please help identify engine. What are you running for a rear end? What ratio?

05-20-2019, 09:27 PM	#9
Marty68 Registered User Join Date: Nov 2014 Location: west coast, Wi Posts: 534	Re: Please help identify engine. i just bought a 3.42 s10 4x4 rear

05-20-2019, 09:41 PM	#10
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,721	Re: Please help identify engine. Fairly wide rearend. With that ratio you likely won’t need an o/d tranny.

05-20-2019, 10:30 PM	#11
Marty68 Registered User Join Date: Nov 2014 Location: west coast, Wi Posts: 534	Re: Please help identify engine. that gear is the most common in a blazer i think an overdrive would put you at 1800 rpm at 60 (283 may not have enough torque...) th350 would be 2400 rpm at 65 long term i want MII... just saw a local guy selling rebuilt th350 long or short shft. $375. would need floor shifter converter flex plate kick down cable and cross member. still thinking open to advice and sugestions. th350 is stronger than t5

05-20-2019, 10:39 PM	#12
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,721	Re: Please help identify engine. 283 is happier at higher rpm. Most motors are. Around 2500 at cruise. Good deal on a t350. Likely all done would be same price as a t5 conversion.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.