Hooker Blackheart 1967-72 C10 Truck LS/LT Swap System Info Thread

[toddoky]

...and in support of the last post, here's some installed images of the systems on the development vehicle.

[Captainfab]

That exhaust looks very nice and tight fitting. One little bit of FYI, most all of these components designed for the '67-'72 trucks will work/fit equally as well on the '63-'66 trucks. One slight difference with regard to the exhaust systems is that the '63-'64 trucks have a different panhard bar assembly which may be close to the passenger side exhaust tail pipe.

[toddoky]

Originally Posted by Captainfab

That exhaust looks very nice and tight fitting. One little bit of FYI, most all of these components designed for the '67-'72 trucks will work/fit equally as well on the '63-'66 trucks. One slight difference with regard to the exhaust systems is that the '63-'64 trucks have a different panhard bar assembly which may be close to the passenger side exhaust tail pipe.

Thanks for the reply captainfab. Yes, I’m aware of the similarities/differences with the earlier model year C10’s and it is our policy on the Hooker Blackheart development team to not include any vehicle model roll-in extensions in our applications without physical verification of fitment being carried out. If the systems prove to be compatible on the earlier trucks, we will roll them into the application.
Posted via Mobile Device

[Captainfab]

That is understandable.