Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
07-30-2019, 07:53 PM | #1 |
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: 1969 C50 4x4 Axle Swap?
well 2 of you guys were tering up others threads at the same time asking the same basics so i got mixed up on who was who .
so here ya go from the other thread i posted in . 1ton down is setup for 2.75" wide stock leafs . aftermarket like lift kits go 2.5" you cant cut in the the housing for 3" wide unless you do a home brew u-bolt conversion as you will loose the 2 bolt holes for the spring plate . the width for a dana 60 front is 32" center to center . the 1ton rear for a 14ff is 40.5" center to center and 2.5" wide springs . the rear can be worked around a bit but the front has the pass side spring mount cast in to the diff housing .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
Bookmarks |
|
|