CA 1971 GMC Suburban Part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 04-01-2020, 02:49 PM

71 GMC Suburban Super Custom 1500. Half ton 2wd with 5 lug rear and disc brake front. 3.73 Posi rear. No motor/trans. Has rust issues... very nice tailgate and hatch. Front seats are not original (obviously) has original second row seat. Still in original ochre and white paint... mostly.
Clean title and on non op.
Possible trades

Front clip-sold
Driver and Passenger Front Doors- sold
Second row seat- sold
Rear bumper. sold
Bare dash- sold
3rd door hinges sold
Rear Hatch-sold
Tailgate- sold

budnikguy · 04-01-2020, 02:54 PM

more...

budnikguy · 04-01-2020, 02:55 PM

and more...

**chewychevy67** · 04-01-2020, 03:30 PM

What would you charge me to cut out this piece around the fuel filler? I would like to graph it into my bed side. I would like it to be fairly wide cut and just below the body line so I have a reference point. I would need the filler neck as well. I am in Canada and can have this shipped to my US address in montana but not until this pandemic is over.

budnikguy · 04-01-2020, 03:44 PM

I am sure this can be done... I have another suburban that has already started to be cut...let me see if that one still has the cut you need... Thank you

**chewychevy67** · 04-01-2020, 03:47 PM

Ok. If it's a 67 to 70 that would be better as my truck uses a vented gas cap.

Killer Bee · 04-01-2020, 04:10 PM

Hi Adam, very interested, how much for the hatch and gate?

can you text me some close ups on the rusty areas? thanks!

budnikguy · 04-01-2020, 04:14 PM

It is a '70...so, fingers crossed it is good abd there,,,will lyk

Quote:

Originally Posted by chewychevy67

Ok. If it's a 67 to 70 that would be better as my truck uses a vented gas cap.

budnikguy · 04-01-2020, 04:19 PM

Reached out to you via text..thanks

Quote:

Originally Posted by Killer Bee

Hi Adam, very interested, how much for the hatch and gate?

can you text me some close ups on the rusty areas? thanks!

Heliarcn · 04-01-2020, 04:29 PM

Condition and price for headliner bows and rear cargo panels please. Shipped to 89149.

**jimmy70** · 04-01-2020, 07:31 PM

Interested in steering column / no steering wheel. How much shipped to 48092. thx, marko

Disastro · 04-01-2020, 08:38 PM

Interested in the rear sill. (Panel that the tailgate bolts to.) Also need a piece of rear frame rail if you'll cut up a frame.

**Dave** · 04-01-2020, 09:22 PM

Adam, getting in line on the hatch and bows, lmk thx
Dave.

AJs72K5 · 04-02-2020, 12:35 AM

Brake pedal return spring from inside the brake pedal assembly?

71gmcC15 · 04-02-2020, 06:00 AM

Parklight bulb sockets?

**ShortbedClayton** · 04-02-2020, 07:38 AM

Are you offering any metal cuts off these burbs? I need the piece above the drivers door between angle of door frame and post. Need to finish up my drivers side crew cab top.
Posted via Mobile Device

**mrtoni** · 04-02-2020, 02:23 PM

He has this posted multiple places on Facebook
Posted via Mobile Device

72 Jimmy Power · 04-02-2020, 03:16 PM

Hi, Any tow hooks??

budnikguy · 04-02-2020, 07:10 PM

Will pull them out and get you detailed pics

Quote:

Originally Posted by Heliarcn

Condition and price for headliner bows and rear cargo panels please. Shipped to 89149.

budnikguy · 04-02-2020, 07:12 PM

$90 shipped to you.

Quote:

Originally Posted by jimmy70

Interested in steering column / no steering wheel. How much shipped to 48092. thx, marko

budnikguy · 04-02-2020, 07:21 PM

I think I have another one already cut from a different burb, will confirm over the weekend for you! I have a chassis foam a panel, same as suburban, that I can make rear frame cuts from....post a pic and measurements of what you need.

Quote:

Originally Posted by Disastro

Interested in the rear sill. (Panel that the tailgate bolts to.) Also need a piece of rear frame rail if you'll cut up a frame.

budnikguy · 04-02-2020, 07:22 PM

Your next in line sir...

Quote:

Originally Posted by Dave

Adam, getting in line on the hatch and bows, lmk thx
Dave.

budnikguy · 04-02-2020, 07:23 PM

Will confirm it is present this weekend for you

Quote:

Originally Posted by AJs72K5

Brake pedal return spring from inside the brake pedal assembly?

budnikguy · 04-02-2020, 07:23 PM

Sorry went with the front clip...

Quote:

Originally Posted by 71gmcC15

Parklight bulb sockets?

budnikguy · 04-02-2020, 08:00 PM

Probably could help you....I have a panel that might be a better candidate for this cut though. Get me a more precise measurement and location for the cut.

Quote:

Originally Posted by ShortbedClayton

Are you offering any metal cuts off these burbs? I need the piece above the drivers door between angle of door frame and post. Need to finish up my drivers side crew cab top.
Posted via Mobile Device

04-01-2020, 02:49 PM	#1
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	1971 GMC Suburban Part out 71 GMC Suburban Super Custom 1500. Half ton 2wd with 5 lug rear and disc brake front. 3.73 Posi rear. No motor/trans. Has rust issues... very nice tailgate and hatch. Front seats are not original (obviously) has original second row seat. Still in original ochre and white paint... mostly. Clean title and on non op. Possible trades Front clip-sold Driver and Passenger Front Doors- sold Second row seat- sold Rear bumper. sold Bare dash- sold 3rd door hinges sold Rear Hatch-sold Tailgate- sold Attached Images Last edited by budnikguy; 04-07-2020 at 04:26 PM.

04-01-2020, 02:54 PM	#2
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1971 GMC Suburban Part out more... Attached Images

04-01-2020, 02:55 PM	#3
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1971 GMC Suburban Part out and more... Attached Images

04-01-2020, 03:30 PM	#4
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,556	Re: 1971 GMC Suburban Part out What would you charge me to cut out this piece around the fuel filler? I would like to graph it into my bed side. I would like it to be fairly wide cut and just below the body line so I have a reference point. I would need the filler neck as well. I am in Canada and can have this shipped to my US address in montana but not until this pandemic is over. Attached Images

04-01-2020, 03:44 PM	#5
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1971 GMC Suburban Part out I am sure this can be done... I have another suburban that has already started to be cut...let me see if that one still has the cut you need... Thank you

04-01-2020, 03:47 PM	#6
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,556	Re: 1971 GMC Suburban Part out Ok. If it's a 67 to 70 that would be better as my truck uses a vented gas cap.

04-01-2020, 04:10 PM	#7
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,814	Re: 1971 GMC Suburban Part out Hi Adam, very interested, how much for the hatch and gate? can you text me some close ups on the rusty areas? thanks! __________________ *I started out with nothing - and I still have most of it*

04-01-2020, 04:29 PM	#10
Heliarcn Registered User Join Date: Nov 2013 Location: Las Vegas, Nevada Posts: 376	Re: 1971 GMC Suburban Part out Condition and price for headliner bows and rear cargo panels please. Shipped to 89149. __________________ Bret 1972 Chevy Suburban 1976 Blazer

04-01-2020, 07:31 PM	#11
jimmy70 Senior Member Join Date: Aug 2007 Location: Warren,Michigan Posts: 1,158	Re: 1971 GMC Suburban Part out Interested in steering column / no steering wheel. How much shipped to 48092. thx, marko

04-01-2020, 08:38 PM	#12
Disastro Registered User Join Date: Feb 2018 Location: Granville Ohio Posts: 34	Re: 1971 GMC Suburban Part out Interested in the rear sill. (Panel that the tailgate bolts to.) Also need a piece of rear frame rail if you'll cut up a frame.

04-01-2020, 09:22 PM	#13
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: 1971 GMC Suburban Part out Adam, getting in line on the hatch and bows, lmk thx Dave.

04-02-2020, 12:35 AM	#14
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: 1971 GMC Suburban Part out Brake pedal return spring from inside the brake pedal assembly? __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

04-02-2020, 06:00 AM	#15
71gmcC15 Registered User Join Date: Feb 2018 Location: Doland SD Posts: 836	Re: 1971 GMC Suburban Part out Parklight bulb sockets? __________________ ( second times the charm) 71 gmc c15 307 sbc 373 rear gears positrac sm 465 trans. ( not listed on spid but is original ) 94 chevy k1500 350 tbi 373 rear gears 4l60e one wheel peel. Gutless 07 gmc sierra classic rcsb 4.3 lt 5 speed w/t 04 chevy Silverado 1500 ext cab 5.3 4l60e. 81 chevy Scottsdale k10 muncie sm465 Np208 10 bolt 8.2 ( Old Green)

04-02-2020, 07:38 AM	#16
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 702	Are you offering any metal cuts off these burbs? I need the piece above the drivers door between angle of door frame and post. Need to finish up my drivers side crew cab top. Posted via Mobile Device Attached Images

04-02-2020, 02:23 PM	#17
mrtoni Senior Member Join Date: Jan 2009 Location: sparks, nevada Posts: 1,881	Re: 1971 GMC Suburban Part out He has this posted multiple places on Facebook Posted via Mobile Device



Register or Log In To remove these advertisements.

04-02-2020, 03:16 PM	#18
72 Jimmy Power Registered User Join Date: Mar 2019 Location: South San Francisco, California Posts: 468	Re: 1971 GMC Suburban Part out Hi, Any tow hooks??

Register or Log In To remove these advertisements.