![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | |
Registered User
Join Date: Apr 2010
Location: Flagstaff, AZ
Posts: 974
|
Re: What master cylinder and proportioning valve for disc/disc
Quote:
Nik
__________________
'59 Apache - 383" SBC/TH-350 '68 GMC - BBC/TH400 |
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,920
|
Re: What master cylinder and proportioning valve for disc/disc
good idea to contact wildwood, since you bought wildwood, they should be able to help you out with a bore size.
the S10 idea for booster is a great idea. like said, trucks are similar in size. one thing to note is that some of the S10 boosters are dual diaphragm and some are single. try rock auto for some part numbers or option numbers. even the stock S10 master would likely be fine, you could try a used one for cheap and if it works, you're on your way. grab the brake lines from the master as well so you have the correct fittings to fit, then you can easily swap them onto a new brake line and just do a new flare after. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,920
|
Re: What master cylinder and proportioning valve for disc/disc
booster for a zr2 S10, dual diaphragm
https://www.rockauto.com/en/moreinfo...oQ0VFpaZTFM%3D master cylinder for ZR@ S10 https://www.rockauto.com/en/moreinfo...oQ0VFpaZTFM%3D |
![]() |
![]() |
![]() |
Bookmarks |
|
|